ET04: Hose Tube Fittings & Valves, Milling and Motion Control & Fluid Power - (25001 Products)
35020 - 1/4″ Diameter × 0.165″ Flute Length × 2-1/2″ Overall Length, 5 Flute, 60 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519566
Brand: M A Ford
Model #: 5HC025001B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Usable Length (LU) | 0.165″ |
| Point Angle (SIG) | 60 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.165″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35012 - 1/4″ Diameter × 0.165″ Flute Length × 2-1/2″ Overall Length, 3 Flute, 60 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519550
Brand: M A Ford
Model #: 3HC025001B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Usable Length (LU) | 0.165″ |
| Point Angle (SIG) | 60 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.165″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35022 - 1/2″ Diameter × 0.364″ Flute Length × 3″ Overall Length, 5 Flute, 60 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519572
Brand: M A Ford
Model #: 5HC050001B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 0.364″ |
| Point Angle (SIG) | 60 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.364″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35013 - 3/8″ Diameter × 0.264″ Flute Length × 2-1/2″ Overall Length, 3 Flute, 60 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519555
Brand: M A Ford
Model #: 3HC037501B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Usable Length (LU) | 0.264″ |
| Point Angle (SIG) | 60 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.264″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35014 - 1/2″ Diameter × 0.364″ Flute Length × 3″ Overall Length, 3 Flute, 60 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519560
Brand: M A Ford
Model #: 3HC050001B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 0.364″ |
| Point Angle (SIG) | 60 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.364″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35015 - 1/8″ Diameter × 0.043″ Flute Length × 1-1/2″ Overall Length, 3 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519544
Brand: M A Ford
Model #: 3HC012503B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.043″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.043″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 1-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35025 - 1/2″ Diameter × 0.21″ Flute Length × 3″ Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519573
Brand: M A Ford
Model #: 5HC050003B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 0.21″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.21″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35016 - 3/16″ Diameter × 0.069″ Flute Length × 2″ Overall Length, 3 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519548
Brand: M A Ford
Model #: 3HC018703B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Usable Length (LU) | 0.069″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.069″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35030 - 16 mm Diameter × 6.88 mm Flute Length × 92 mm Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519580
Brand: M A Ford
Model #: 5HCM16003B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Usable Length (LU) | 6.88 mm |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 6.88 mm |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 92 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90122 Ballnose End Mill, 3/8″ Dia. × 1/2″ LOC × 3/8″ Shank Dia. × 2-1/2″ OAL, 2 Flute, Carbide, Uncoated
Item #: DD1519591
Brand: M A Ford
Model #: DE2B3750
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90119 Ballnose End Mill, 1/8″ Dia. × 1/4″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 1 Flute, Carbide, Uncoated
Item #: DD1519581
Brand: M A Ford
Model #: DE1B1250
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 1 |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35029 - 12 mm Diameter × 5 mm Flute Length × 83 mm Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519579
Brand: M A Ford
Model #: 5HCM12003B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 12 mm |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Usable Length (LU) | 5 mm |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 5 mm |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 83 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90124 Ballnose End Mill, 5/8″ Dia. × 7/8″ LOC × 5/8″ Shank Dia. × 3-1/2″ OAL, 2 Flute, Carbide, Uncoated
Item #: DD1519593
Brand: M A Ford
Model #: DE2B6250
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35028 - 10 mm Diameter × 4.13 mm Flute Length × 72 mm Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519578
Brand: M A Ford
Model #: 5HCM10003B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Usable Length (LU) | 4.13 mm |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 4.13 mm |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 72 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90120 Ballnose End Mill, 3/16″ Dia. × 5/16″ LOC × 3/16″ Shank Dia. × 2″ OAL, 1 Flute, Carbide, Uncoated
Item #: DD1519582
Brand: M A Ford
Model #: DE1B1875
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Flute Count (NOF) | 1 |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35023 - 1/4″ Diameter × 0.095″ Flute Length × 2-1/2″ Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519567
Brand: M A Ford
Model #: 5HC025003B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Usable Length (LU) | 0.095″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.095″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35024 - 3/8″ Diameter × 0.153″ Flute Length × 2-1/2″ Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519570
Brand: M A Ford
Model #: 5HC037503B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Usable Length (LU) | 0.153″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.153″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90129 Ballnose End Mill, 6 mm Dia. × 10 mm LOC × 6 mm Shank Dia. × 64 mm OAL, 2 Flute, Carbide, Uncoated
Item #: DD1519595
Brand: M A Ford
Model #: DE2BM0600
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 10 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 64 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90131 Ballnose End Mill, 10 mm Dia. × 15 mm LOC × 10 mm Shank Dia. × 75 mm OAL, 2 Flute, Carbide, Uncoated
Item #: DD1519597
Brand: M A Ford
Model #: DE2BM1000
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 15 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 75 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
90121 Ballnose End Mill, 1/4″ Dia. × 3/8″ LOC × 1/4″ Shank Dia. × 2″ OAL, 2 Flute, Carbide, Uncoated
Item #: DD1519590
Brand: M A Ford
Model #: DE2B2500
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It