ET04: Hose Tube Fittings & Valves, Milling and Motion Control & Fluid Power - (25001 Products)
Square End Mill: 20.00 mm Dia, 22.00 mm LOC, 3 Flute, Solid Carbide
Item #: 75204099
Brand: WNT
Model #: 54610203Product Specifications
Mill Diameter (mm)
20.00
Mill Diameter (Decimal Inch)
0.7874
Number Of Flutes
3
End Mill Material
Solid Carbide
Length of Cut (mm)
22.00
Shank Diameter (mm)
20.00
Overall Length (mm)
114.00
Single Or Double End
Single
Coating/Finish Family
Bright/Uncoated
Centercutting
No
Cutting Direction
Right Hand
Flute Direction
Right Hand
Extended Reach
No
Coolant Through
No
Helix Angle
45
Coating/Finish
Bright/Uncoated
Variable Helix
Yes
Variable Index
No
Chipbreaker
No
Flute Type
Spiral
Shank Type
Straight
Neck Diameter (mm)
19.50
Series
54610
System Of Measurement
Metric
UNSPSC Code
27112803
Mill Diameter (mm)
20.00
Mill Diameter (Decimal Inch)
0.7874
Number Of Flutes
3
End Mill Material
Solid Carbide
Length of Cut (mm)
22.00
Shank Diameter (mm)
20.00
Overall Length (mm)
114.00
Single Or Double End
Single
Coating/Finish Family
Bright/Uncoated
Centercutting
No
Cutting Direction
Right Hand
Flute Direction
Right Hand
Extended Reach
No
Coolant Through
No
Helix Angle
45
Coating/Finish
Bright/Uncoated
Variable Helix
Yes
Variable Index
No
Chipbreaker
No
Flute Type
Spiral
Shank Type
Straight
Neck Diameter (mm)
19.50
Series
54610
System Of Measurement
Metric
UNSPSC Code
27112803
MSC Part #
75204099
Mfr Part #
54610203
Country of Origin Country of Origin is subject to change
France
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 16.00 mm Dia, 32.00 mm LOC, 4 Flute, Solid Carbide
Item #: 07007669
Brand: Walter-Prototyp
Model #: 8414796Product Specifications
Mill Diameter (mm)
16.00
Mill Diameter (Decimal Inch)
0.6299
Number Of Flutes
4
End Mill Material
Solid Carbide
Length of Cut (mm)
32.00
Shank Diameter (mm)
16.00
Overall Length (mm)
89.00
Single Or Double End
Single
Coating/Finish Family
TiAlN
Centercutting
Yes
Cutting Direction
Right Hand
Flute Direction
Right Hand
Extended Reach
No
Coolant Through
No
Helix Angle
38
Primary Workpiece Material
High-Temp Alloy; Stainless Steel; Cast Iron; Steel
Primary Workpiece Material Code
P; S; K; M
Secondary Workpiece Material
High-Temp Alloy; Stainless Steel; Cast Iron
Secondary Workpiece Material Code
S; K; M
Coating/Finish
TiAlN
Variable Helix
No
Variable Index
No
Chipbreaker
No
Flute Type
Spiral
Shank Type
Whistle Notch
Material Grade
Solid Carbide
Reach Length (Decimal Inch)
1.2598
Reach Length (mm)
32.00
Shank Diameter Tolerance
h6
Series
MA230
System Of Measurement
Metric
UNSPSC Code
23241614
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 1/2" Dia, 5/8" LOC, 4 Flute, Solid Carbide
Item #: 06906655
Brand: Internal Tool
Model #: 45-3245Product Specifications
Mill Diameter (Inch)
1/2
Mill Diameter (Decimal Inch)
0.5000
Number Of Flutes
4
Length of Cut (Inch)
5/8
Single Or Double End
Single
End Mill Material
Solid Carbide
Coating/Finish
Bright/Uncoated
Overall Length (Inch)
3
Centercutting
Yes
Flute Direction
Right Hand
Variable Index
No
Variable Helix
No
Cutting Direction
Right Hand
Coolant Through
No
Overall Length (Decimal Inch)
3.0000
Chipbreaker
No
Length Of Cut (Decimal Inch - 4 Decimals)
0.6250
Length Type
Regular
Flute Type
Spiral
Extended Reach
Yes
Shank Type
Straight-Cylindrical
Shank Diameter (Decimal Inch)
0.5000
Shank Diameter (Inch)
1/2
Neck Diameter (Decimal Inch)
0.4250
Reach Length (Decimal Inch)
1.0000
Reach Length (Inch)
1
Primary Workpiece Material
Non-Ferrous Metal; Hard Material; Stainless Steel; Cast Iron; Superalloys & Titanium; Plastic; Steel
UNSPSC Code
27112803
Primary Workpiece Material Code
P; S; H; K; M; N
Material Grade
Micrograin
Series
45
Helix Style
Medium
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Extension Springs; End Type: Double Loop; Outside Diameter (Decimal Inch
Item #: 03050820
Brand: Associated Spring Raymond
Model #: MCDE0625011200SProduct Specifications
End Type
Double Loop
Outside Diameter (Decimal Inch - 4 Decimals)
0.6250
Spring Rate
1.3000
Material
Stainless Steel
Overall Length (Decimal Inch)
12.1440
Initial Tension (Lb.)
4.34
Maximum Extended Length (Decimal Inch)
22.5300
Free Length (Inch)
12
Inside Hook Length (Fractional Inch)
12
Standards
ASTM A313
Finish/Coating
Uncoated
Wire Size (Decimal Inch)
0.0720
UNSPSC Code
31161907
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Sandvik Coromant / Part #: 8353004
Item #: 67700658
Brand: Sandvik Coromant
Model #: 8353004Product Specifications
Mill Diameter (Inch)
3/4
Corner Radius (Decimal Inch)
0.0900
Coating/Finish
TiAlSiN
End Mill Material
Solid Carbide
Number Of Flutes
4
Single Or Double End
Single
Length of Cut (Inch)
1-5/8
Cutting Direction
Right Hand
Coolant Through
Yes
Mill Diameter (Decimal Inch)
0.7500
Flute Direction
Right Hand
Helix Angle
38
Overall Length (Decimal Inch)
4.3150
Chipbreaker
No
End Type
Corner Radius
Length Type
Standard
Extended Reach
No
Shank Type
Weldon
Centercutting
Yes
Material Removal Type
Roughing
Shank Diameter (Inch)
3/4
Minimum Helix Angle
35
Maximum Helix Angle
45
Primary Workpiece Material
Stainless Steel
Primary Workpiece Material Code
M
Secondary Workpiece Material
Super Alloys & Titanium
Secondary Workpiece Material Code
S
Series
CoroMill? Plura
Material Application
Stainless Steel; Superalloys & Titanium
Coating Classification
PVD
Helix Style
Variable
Manufacturers Catalog Number
2S342-1905-229CMB M2CM
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.3125″ Dia. × 0.3125″ Shank × 1″ DOC × 3″ OAL, APLUS, 6 Flute, Ballnose End Mill
Item #: HS1059441
Brand: Helical Solutions
Model #: 59441
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 1″ |
| Decimal Equivalent | 0.3125″ |
| Overall Length (OAL) | 3″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.018″ Cutting Dia. × 1/8″ Shank Size × 0.027″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN, 0.005″ Corner Radius End Mill
Item #: GE90993818C3
Brand: Harvey Tool
Model #: 993818-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.018″ |
| Usable Length (LU) | 0.027″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.005″ |
| Depth of Cut Maximum (APMX) | 0.027″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.005″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.039″ Dia. × 0.059″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 3 Flute, Carbide, TiAlN, Ballnose Endmill
Item #: GE90868239C3
Brand: Harvey Tool
Model #: 868239-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.039″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 9/32″ |
| Depth of Cut Maximum (APMX) | 0.059″ |
| Corner Radius (RE) | 0.0195″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 7D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
82460 3 FL 5/16 EM ZPLUS
Item #: HS1082460
Brand: Helical Solutions
Model #: 82460
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Flute Helix Angle (FHA) | 40 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Depth of Cut Maximum (APMX) | 1″ |
| Corner Radius (RE) | 0.156″ |
| Overall Length (OAL) | 3″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 0.067″ Dia. × 0.201″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flutes, Carbide, AlTiN
Item #: TA15TC56267
Brand: Titan USA
Model #: TC56267
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.067″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 0.201″ |
| End Shape | Square |
| Overall Length (OAL) | 1-1/2″ |
| Usable Length (LU) | 0.201″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 0.069″ Dia. × 0.207″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC58069
Brand: Titan USA
Model #: TC58069
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.069″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 0.207″ |
| End Shape | Square |
| Overall Length (OAL) | 1-1/2″ |
| Usable Length (LU) | 0.207″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 1″ Dia. × 3″ LOC × 1″ Shank Dia. × 6″ OAL, 3 Flutes, Carbide, AlTiN
Item #: TA15TC17464
Brand: Titan USA
Model #: TC17464
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 3″ |
| End Shape | Square |
| Overall Length (OAL) | 6″ |
| Usable Length (LU) | 3″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 1-1/4″ Dia. × 1-5/8″ LOC × 1″ Shank Dia. × 4-1/8″ OAL, 2 Flutes, HSS M42, Uncoated
Item #: TA15TE82765
Brand: Titan USA
Model #: TE82765
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1-1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| End Shape | Square |
| Overall Length (OAL) | 4-1/8″ |
| Usable Length (LU) | 1-5/8″ |
| Cutting Edge Material | HSSCo |
| Decimal Equivalent | 1.25″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 1-3/8″ Dia. × 2″ LOC × 3/4″ Shank Dia. × 4-1/4″ OAL, 6 Flutes, HSS M42, AlTiN
Item #: TA15TE81376
Brand: Titan USA
Model #: TE81376
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1-3/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 2″ |
| End Shape | Square |
| Overall Length (OAL) | 4-1/4″ |
| Usable Length (LU) | 2″ |
| Cutting Edge Material | HSSCo |
| Decimal Equivalent | 1.375″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 23/64″ Dia. × 1″ LOC × 3/8″ Shank Dia. × 2-1/2″ OAL, 4 Flutes, Carbide, TiCN
Item #: TA15TC90523
Brand: Titan USA
Model #: TC90523
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 23/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1″ |
| Usable Length (LU) | 1″ |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.3594″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiCN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 3/32″ Dia. × 3/16″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flutes, Carbide, Uncoated
Item #: TA15TC10206
Brand: Titan USA
Model #: TC10206
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Usable Length (LU) | 3/16″ |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.0938″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 3/8″ Dia. × 1-3/4″ LOC × 3/8″ Shank Dia. × 4″ OAL, 4 Flutes, Carbide, TiCN
Item #: TA15TC97524
Brand: Titan USA
Model #: TC97524
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1-3/4″ |
| Usable Length (LU) | 1-3/4″ |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiCN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 4 mm Dia. × 25 mm LOC × 4 mm Shank Dia. × 63 mm OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC82551
Brand: Titan USA
Model #: TC82551
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 25 mm |
| End Shape | Square |
| Overall Length (OAL) | 63 mm |
| Usable Length (LU) | 25 mm |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Coating | Uncoated |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 5/8″ Dia. × 1-5/8″ LOC × 5/8″ Shank Dia. × 3-3/4″ OAL, 4 Flutes, HSS M42, AlTiN
Item #: TA15TE81336
Brand: Titan USA
Model #: TE81336
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| End Shape | Square |
| Overall Length (OAL) | 3-3/4″ |
| Usable Length (LU) | 1-5/8″ |
| Cutting Edge Material | HSSCo |
| Decimal Equivalent | 0.625″ |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 5/8″ Dia. × 2-3/8″ LOC × 5/8″ Shank Dia. × 5″ OAL, 2 Flutes, Carbide, ZrN
Item #: TA15TC63340
Brand: Titan USA
Model #: TC63340
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Helix Angle (FHA) | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 2-3/8″ |
| Usable Length (LU) | 2-3/8″ |
| Overall Length (OAL) | 5″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | ZrN |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It