ET04: Hose Tube Fittings & Valves, Milling and Motion Control & Fluid Power - (25001 Products)
03818 Ballnose End Mill, 16 mm Dia. × 24 mm LOC × 16 mm Shank Dia. × 92 mm OAL, 8 Flute, Carbide, ALtima Xtreme
Item #: DD1519657
Brand: M A Ford
Model #: MFPBM1601AX
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Coating | ALtima Xtreme |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Flute Count (NOF) | 8 |
| Depth of Cut Maximum (APMX) | 24 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 92 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
03817 Ballnose End Mill, 5/8″ Dia. × 3/4″ LOC × 5/8″ Shank Dia. × 5″ OAL, 8 Flute, Carbide, ALtima Xtreme
Item #: DD1519646
Brand: M A Ford
Model #: MFPB62502AX
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Coating | ALtima Xtreme |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Flute Count (NOF) | 8 |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 5″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
03821 Ballnose End Mill, 3/4″ Dia. × 1″ LOC × 3/4″ Shank Dia. × 6″ OAL, 10 Flute, Carbide, ALtima Xtreme
Item #: DD1519648
Brand: M A Ford
Model #: MFPB75002AX
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Coating | ALtima Xtreme |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Flute Count (NOF) | 10 |
| Depth of Cut Maximum (APMX) | 1″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
03823 Ballnose End Mill, 20 mm Dia. × 30 mm LOC × 20 mm Shank Dia. × 152 mm OAL, 10 Flute, Carbide, ALtima Xtreme
Item #: DD1519660
Brand: M A Ford
Model #: MFPBM2002AX
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 20 mm |
| Coating | ALtima Xtreme |
| Connection Diameter Machine Side (DCONMS) | 20 mm |
| Flute Count (NOF) | 10 |
| Depth of Cut Maximum (APMX) | 30 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 152 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4″ Cutting Diameter × 3/4″ Flute Length × 3″ Overall Length, Carbide Router Bit
Item #: DD1519516
Brand: M A Ford
Model #: 23125020DGP
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 3″ |
| Usable Length (LU) | 0.7″ |
| Flute Count (NOF) | 24 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11587 Ballnose End Mill, 22 mm Dia. × 40 mm LOC × 22 mm Shank Dia. × 102 mm OAL, 2 Flute, Carbide, ALtima
Item #: DD1519511
Brand: M A Ford
Model #: 15086620A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 22 mm |
| Coating | ALtima |
| Connection Diameter Machine Side (DCONMS) | 22 mm |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 40 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 102 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11559 Ballnose End Mill, 0.09″ Dia. × 0.27″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flute, Carbide, ALtima
Item #: DD1519509
Brand: M A Ford
Model #: 15009000A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.09″ |
| Coating | ALtima |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 0.27″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11560 Ballnose End Mill, 3/32″ Dia. × 9/32″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flute, Carbide, ALtima
Item #: DD1519510
Brand: M A Ford
Model #: 15009370A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Coating | ALtima |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 9/32″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.0937″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11967 Ballnose End Mill, 5/32″ Dia. × 5/16″ LOC × 3/16″ Shank Dia. × 2″ OAL, 4 Flute, Carbide, ALtima
Item #: DD1519512
Brand: M A Ford
Model #: 16515620A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/32″ |
| Coating | ALtima |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Flute Count (NOF) | 4 |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.1562″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18884 - 3/8″ Diameter × 0.153″ Flute Length × 2-1/2″ Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519571
Brand: M A Ford
Model #: 5HC037503B KIT
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Usable Length (LU) | 0.153″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.153″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18757 Ballnose End Mill, 6 mm Dia. × 20 mm LOC × 6 mm Shank Dia. × 64 mm OAL, 4 Flute, Carbide, Altima Blaze
Item #: DD1519507
Brand: M A Ford
Model #: 14023620B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Coating | Altima Blaze |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 4 |
| Depth of Cut Maximum (APMX) | 20 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 64 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18882 - 1/2″ Diameter × 0.21″ Flute Length × 3″ Overall Length, 3 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519562
Brand: M A Ford
Model #: 3HC050003 KIT
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 0.21″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.21″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18881 - 3/8″ Diameter × 0.153″ Flute Length × 2-1/2″ Overall Length, 3 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519557
Brand: M A Ford
Model #: 3HC037503 KIT
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Usable Length (LU) | 0.153″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.153″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18883 - 1/4″ Diameter × 0.095″ Flute Length × 2-1/2″ Overall Length, 5 Flute, 90 Degree Point Angle, Carbide Chamfer Mill
Item #: DD1519568
Brand: M A Ford
Model #: 5HC025003B KIT
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Usable Length (LU) | 0.095″ |
| Point Angle (SIG) | 90 Degrees |
| Flute Count (NOF) | 5 |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 0.095″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18997 Ballnose End Mill, 5/64″ Dia. × 3/16″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 Flute, Carbide, Fordlube
Item #: DD1519508
Brand: M A Ford
Model #: 15007810F
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/64″ |
| Coating | Fordlube |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.0781″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18996 Ballnose End Mill, 3/4″ Dia. × 1″ LOC × 3/4″ Shank Dia. × 4″ OAL, 3 Flute, Carbide, Fordlube
Item #: DD1519505
Brand: M A Ford
Model #: 138B75000F
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Coating | Fordlube |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Flute Count (NOF) | 3 |
| Depth of Cut Maximum (APMX) | 1″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19301 - 1/16″ Cutting Diameter × 3/16″ Flute Length × 1-1/2″ Overall Length, Carbide Router Bit
Item #: DD1519514
Brand: M A Ford
Model #: 23006251GP
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Usable Length (LU) | 3/8″ |
| Flute Count (NOF) | 12 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19346 - 6 mm Cutting Diameter × 51 mm Flute Length × 51 mm Overall Length, Carbide Router Bit
Item #: DD1519515
Brand: M A Ford
Model #: 23123620FGP
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Depth of Cut Maximum (APMX) | 51 mm |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 51 mm |
| Usable Length (LU) | 14.73 mm |
| Flute Count (NOF) | 24 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19369 Ballnose End Mill, 9/32″ Dia. × 1/2″ LOC × 5/16″ Shank Dia. × 2″ OAL, 2 Flute, Carbide, Gem Plus
Item #: DD1519513
Brand: M A Ford
Model #: 16628120GP
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 9/32″ |
| Coating | Gem Plus |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Flute Count (NOF) | 2 |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.2812″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19474 Ballnose End Mill, 3 mm Dia. × 5 mm LOC × 6 mm Shank Dia. × 75 mm OAL, 3 Flute, Carbide, Fordlube
Item #: DD1519500
Brand: M A Ford
Model #: 138B1181N5F
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Coating | Fordlube |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Flute Count (NOF) | 3 |
| Depth of Cut Maximum (APMX) | 5 mm |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 75 mm |
| Measurement Type | Metric |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It