ET04: Hose Tube Fittings & Valves, Milling and Motion Control & Fluid Power - (25001 Products)
Power Hydraulic Pumps & Jacks; Type: Electric Hydraulic Pump; 1st Stage Pressure Rating: 10000; 2nd Stage Pressure Rating: 10000; Pressure Rating (psi): 10000; Oil Capacity: 5 gal; Actuation: Double Acting; Cylinder Operating Function: Advance, Hold and R
Item #: 03538758
Brand: Enerpac
Model #: ZE5420SGProduct Specifications
Type
Electric Hydraulic Pump
1st Stage Pressure Rating
10000
2nd Stage Pressure Rating
10000
Pressure Rating (psi)
10000
Oil Capacity
5 gal
Actuation
Double Acting
Cylinder Operating Function
Advance, Hold and Retract
Valve Type
Four-Way; Three-Position
Adjustable Relief Valve
Yes
Includes
Electric Box; LCD
Overall Length
27.90
Overall Width
20
Overall Height
24.6 in
Usable Oil Capacity
5 gal
Additional Information
Motor Phases: 3 ph; 200-240V; Series: ZE; Motor Speed: 1750 rpm; Sound Level: 75 dBA; Motor Hertz: 50/60 Hz; Operation Type: Solenoid Valve; Duty Cycle: Extended; Thread: 3/4 in NPTF
Resovoir Capacity (Cu.In.)
1201
Used With Cylinders
Double Acting
Horse Power
3 hp
UNSPSC Code
27121800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Thrust Bearing: 1.5" ID, 2.594" OD, 0.75" Thick, Ball, 21,400 lb, 9,800 psi Max PV
Item #: 03380102
Brand: INA Bearing
Model #: B17Product Specifications
Outside Diameter (Decimal Inch - 4 Decimals)
2.5940
Inside Diameter (Decimal Inch)
1.5000
Material
Steel
Style
Ball
Static Load Capacity
21400
Width (Decimal Inch - 4 Decimals)
0.7500
Thickness (Decimal Inch - 4 Decimals)
0.7500
UNSPSC Code
31171507
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Belt & Chain Guides; Guide Type: Round Belt Guide; Guide Height: 0.59 mm, 0.59 in; Guide Material: UHMW PE; Overall Length: 10 cm, 10 yd, 10 ft, 10 mm, 10 m, 10 in
Item #: 03074598
Brand: Fenner Drives
Model #: GB1000-3S120.00Product Specifications
Guide Type
Round Belt Guide
Guide Height
0.59 mm; 0.59 in
Guide Material
UHMW PE
Overall Length
10 cm; 10 yd; 10 ft; 10 mm; 10 m; 10 in
Channel Material
Stainless Steel
UNSPSC Code
23153030
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 5877581
Item #: 33982083
Brand: Widia
Model #: 5877581Product Specifications
Mill Diameter (mm)
6.00
Chamfer Width (mm)
0.10
Coating/Finish
Bright/Uncoated
End Mill Material
Solid Carbide
Number Of Flutes
2
Single Or Double End
Single
Overall Length (mm)
54.00
Length of Cut (mm)
7.00
Cutting Direction
Right Hand
Coolant Through
No
Flute Direction
Right Hand
Chipbreaker
No
End Type
Single
Chamfer Angle
45
Length Type
Regular
Flute Type
Helical
Extended Reach
No
Shank Type
Straight-Cylindrical
Centercutting
Yes
Material Removal Type
Finishing
Shank Diameter (Decimal Inch)
0.2362
Minimum Helix Angle
30.00
Maximum Helix Angle
30.00
Primary Workpiece Material
Steel
Primary Workpiece Material Code
P
Secondary Workpiece Material
Non-Ferrous Metal
Secondary Workpiece Material Code
N
Series
D002
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-4FL FUSION-EXT-X/LG 1-1/2x6 w/.125R AlTiCrN
Item #: MW21284000712
Brand: Monster Tool Company
Model #: 284-000712
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 6″ |
| Length Group | Extended Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | AlTiCrN |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill; 1/64″ Radius × 3/8″ Dia. × 1-1/8″ LOC × 3/8″ Shank Dia. × 3″ OAL, 4 Flutes, Carbide, AlTiN
Item #: TA15TC74422
Brand: Titan USA
Model #: TC74422
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Usable Length (LU) | 1-1/8″ |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Corner Radius (RE) / Chamfer Width (CHW) | 1/64″ |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill; 0.5 mm Dia. × 3 mm Shank Dia. × 38 mm OAL ; 4 FL ; Carbide ; AlTiN ; Series 2821A
Item #: ER452821A0005
Brand: EMUGE-FRANKEN
Model #: 2821A.0005
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5 mm |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Application | | Finishing | |
| Overall Length (OAL) | 38 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Coating | AlTiN |
| Series/List # | 2821A |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.02″ Dia. × 0.06″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 4 Flute, Carbide, TiAlN, Ballnose Endmill
Item #: GE90805520C3
Brand: Harvey Tool
Model #: 805520-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 9/64″ |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | 7D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.02″ Dia. × 0.06″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90892120
Brand: Harvey Tool
Model #: 892120
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Usable Length (LU) | 0.06″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Length Group | 3D |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | No |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.02″ Dia. × 0.063″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 60 Degrees, Carbide, Uncoated, Drill/End Mills
Item #: GE90991767
Brand: Harvey Tool
Model #: 991767
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Coating | Uncoated |
| Usable Length (LU) | 0.063″ |
| Shank Type | Round |
| Flute Count (NOF) | 2 |
| End Shape | Mill Style |
| Flute Helix Angle (FHA) | 30 Degrees |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 0.063″ |
| Measurement Type | Inch |
| Overall Length (OAL) | 1-1/2″ |
| Series/List # | Specialty Profiles |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Body Material | Carbide |
| Point Angle (SIG) | 60 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.025″ Cutting Dia. × 1/8″ Shank Size × 0.038″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, Uncoated, 0.003″ Corner Radius End Mill
Item #: GE90987525
Brand: Harvey Tool
Model #: 987525
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Usable Length (LU) | 0.038″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.003″ |
| Depth of Cut Maximum (APMX) | 0.038″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.003″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.03″ Dia. × 5/32″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 3 Flute, 15 Degrees Body Half Taper Angle, Carbide, AlTiN Nano, Ball, Tapered End Mill
Item #: GE90785930C6
Brand: Harvey Tool
Model #: 785930-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.03″ |
| Coating | AlTiN Nano |
| Depth of Cut Maximum (APMX) | 5/32″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 3 |
| End Shape | Ball |
| Corner Radius (RE) | 0.015″ |
| Shank Type | Round |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | 5D |
| Flute Helix Angle (FHA) | 30 Degrees |
| Flute Type | Spiral |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Series/List # | Miniature End Mills |
| Point Angle (SIG) | 30 Degrees |
| Body Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.03″ Cutting Dia. × 1/8″ Shank Size × 0.09″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, Square End Mill
Item #: GE90875430C6
Brand: Harvey Tool
Model #: 875430-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.03″ |
| Usable Length (LU) | 0.09″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Applicable Material | | Super-Alloys / Titanium | |
| Depth of Cut Maximum (APMX) | 0.09″ |
| Length Group | 3D |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN Nano |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 34 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.035″ Cutting Dia. × 1/8″ Shank Size × 3/16″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, AlTiN, Square End Mill
Item #: GE90834135C3
Brand: Harvey Tool
Model #: 834135-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.035″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 3/16″ |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.039″ Cutting Dia. × 1/8″ Shank Size × 0.059″ LOC × 2-1/2″ OAL, 3 Flute, Carbide, Uncoated, Square End Mill
Item #: GE90937039
Brand: Harvey Tool
Model #: 937039
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.039″ |
| Usable Length (LU) | 0.24″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.038″ |
| Depth of Cut Maximum (APMX) | 0.059″ |
| Length Group | 6D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.039″ Cutting Dia. × 1/8″ Shank Size × 0.059″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, AlTiN, Square End Mill
Item #: GE90861639C3
Brand: Harvey Tool
Model #: 861639-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.039″ |
| Usable Length (LU) | 13/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.038″ |
| Depth of Cut Maximum (APMX) | 0.059″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.039″ Dia. × 0.059″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 3 Flute, Carbide, TiAlN, Ballnose Endmill
Item #: GE90860639C3
Brand: Harvey Tool
Model #: 860639-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.039″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.24″ |
| Depth of Cut Maximum (APMX) | 0.059″ |
| Corner Radius (RE) | 0.0195″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 6D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.039″ Dia. × 1/8″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 90 Degrees, Carbide, Uncoated, Drill/End Mills
Item #: GE901531M2
Brand: Harvey Tool
Model #: 1531M-2
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.039″ |
| Coating | Uncoated |
| Usable Length (LU) | 1/8″ |
| Shank Type | Round |
| Flute Count (NOF) | 2 |
| End Shape | Mill Style |
| Flute Helix Angle (FHA) | 30 Degrees |
| Length Group | 3D |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Measurement Type | Inch |
| Overall Length (OAL) | 1-1/2″ |
| Series/List # | Specialty Profiles |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Body Material | Carbide |
| Point Angle (SIG) | 90 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.04″ Cutting Dia. × 1/8″ Shank Size × 13/64″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, Uncoated, 0.005″ Corner Radius End Mill
Item #: GE90959640
Brand: Harvey Tool
Model #: 959640
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.04″ |
| Usable Length (LU) | 13/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.005″ |
| Depth of Cut Maximum (APMX) | 13/64″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Size (SS) | 1/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.005″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keyseat Cutter, 1/4″ Dia. × 1/4″ Shank Dia. × 1/8″ CW × 2″ OAL, 4 Teeth, 90 Degrees, Carbide, Round Shank, Uncoated, Specialty Profiles
Item #: GE90807116
Brand: Harvey Tool
Model #: 807116
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Protruding Length (LPR) | 1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2″ |
| Coating | Uncoated |
| Number of Teeth | 4 |
| Shank Type | Round |
| Cutting Width (CW) | 1/8″ |
| Flute Type | Helical |
| Angle | 90 Degrees |
| Series/List # | Specialty Profiles |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 1/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It