CAT50 1IN SHRINK FIT HOLDER

Item #: GM76500002
Manufacturer: Lyndex
Mfg #: CAT50-SF10

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$441.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/8"-6" - Shrink Fit Holder with Coolblast

Item #: TE12290586B
Manufacturer: Techniks
Mfg #: 29058-6B

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 9.5mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 3/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 3/4 x 3.94 - Shrink Fit Tool Holder

Item #: GM94H63753949
Manufacturer: Parlec
Mfg #: H63A-75SF3

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 3.940 *Model Number: H63A-75SF394-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$294.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/2 SHRINK FIT HOLDER

Item #: GM76SF050035
Manufacturer: Lyndex
Mfg #: CAT50-SF05

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$488.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 40E 3/16"-3.54" - Shrink Fit Holder

Item #: TE1239002E
Manufacturer: Techniks
Mfg #: 39002-E

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Gage Length: 3.54 *Outside Diameter: 2.36 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 3/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$204.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12mm Strght SH 1.0 Dia Shrink Fit Tool Ext. 7.00" Long

Item #: GM30SF12M700
Manufacturer: Briney
Mfg #: SS100SF-12

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 12mm *Brand Name: Briney *Gage Length: 1.000 *Outside Diameter: 1.000 *Shank: SS *Standard: ANSI *Type: SS Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 1.5000

$265.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

20MM-12MMX200MM SHRINK EXTENSION

Item #: HA717720212
Manufacturer: Haimer USA LLC
Mfg #: 77.202.12

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$286.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" CAT 40 Shrink Fit Toolholder - 4.0" Gauge Length

Item #: GM3025400
Manufacturer: Briney
Mfg #: V40SF-025-

Technical Specifications:
*Bearing Surface: .750 *Bore Diameter: 1/4 *Brand Name: Briney *Gage Length: 4.000 *Outside Diameter: 1.000 *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 2.8500 *Dimensions - Height: 3.00 Length: 9.20 Width: 3.00

$336.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 STRT SHK 1/2 SHRINK FIT EXT

Item #: GM76502141
Manufacturer: Lyndex
Mfg #: ST75-SF050

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$192.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

16MM-4MMX160MM GL SHRINK EXTENSION

Item #: HA717716004
Manufacturer: Haimer USA LLC
Mfg #: 77.160.04

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1-1/4 x 3.94 - Shrink Fit Tool Holder

Item #: GM94C40123949
Manufacturer: Parlec
Mfg #: C40-12SF39

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 3.940 *Model Number: C40-12SF394-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1" CAT 50 Shrink Fit Toolholder - 6.3" Gauge Length

Item #: GM30100630D50
Manufacturer: Briney
Mfg #: V50SF-100-

Technical Specifications:
*Bearing Surface: 1.890 *Bore Diameter: 1 *Brand Name: Briney *Gage Length: 6.299 *Outside Diameter: 1.969 *Shank: CAT50 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 10.3000 *Dimensions - Height: 4.50 Length: 11.7 Width: 4.50

$496.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

20mm CAT 50 Shrink Fit Toolholder - 100mm Gauge Length

Item #: GM3020M10050
Manufacturer: Briney
Mfg #: V50SF-20M-

Technical Specifications:
*Bearing Surface: 31.75mm *Bore Diameter: 20mm *Brand Name: Briney *Gage Length: 3.937 *Outside Diameter: 38.10mm *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 8.5000

$441.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C50386309
Manufacturer: Parlec
Mfg #: C50-38SF63

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C50-38SF630-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$401.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 16mm x 80mm Shrink Fit Chuck

Item #: HA7140840164
Manufacturer: Haimer USA LLC
Mfg #: 40.840.16.

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 40.840.16.4 *Outside Diameter: 34mm *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 3.5000

$340.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 1/8X2.37"GL MINI SHRINK CHK

Item #: HA71E4018018Z
Manufacturer: Haimer USA LLC
Mfg #: E40.180.1/

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .8800

$479.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 1/4" x 6" - Shrink Fit Holder

Item #: TE1229076
Manufacturer: Techniks
Mfg #: 29076

Technical Specifications:
*Bore Diameter: 1 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 31.8mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 1 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .5237

$415.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100A 1/4 SHRINK FIT HOLDER

Item #: GM76500685
Manufacturer: Lyndex
Mfg #: H100A-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$458.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 3/4" x 90mm - Shrink Fit Holder

Item #: TE1239115
Manufacturer: Techniks
Mfg #: 39115

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 19.1mm *Gage Length: 3.54 *Outside Diameter: 2.48 *Shank: 3/4 *Standard: ISO 1940 *Type: Shrink Fit BT Holder *USA-ANSI Tool Shank Range: 3/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2000

$263.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 5/16 x 3.15 - Shrink Fit Tool Holder

Item #: GM94C40313159
Manufacturer: Parlec
Mfg #: C40-31SF31

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C40-31SF315-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It