HSK63 6mm x 160mm - Shrink Fit Tool Holder

Item #: GM94H63M061609
Manufacturer: Parlec
Mfg #: H63A-M06SF

Technical Specifications:
*Bore Diameter: 6mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: H63A-M06SF160-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-A100 3/8" Bore Dia. x 3.54 Gage Length Shrink Fit Toolholder

Item #: GM266726434
Manufacturer: Bilz
Mfg #: 6726434

Technical Specifications:
*Bearing Surface: 1.65 *Bore Diameter: 3/8" *Brand Name: Bilz *Gage Length: 3.54 *Outside Diameter: 1.26 *Shank: HSK-A100 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 6.5000

$484.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1 x 2.95 Power Shrink Fit Chuck

Item #: HA71408451Z37
Manufacturer: Haimer USA LLC
Mfg #: 40.845.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 2.56 *Model Number: 40.845.1Z.37 *Outside Diameter: 2.09 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 3.0000

$617.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 4MMX70MM GL MINI SHRINK CHK

Item #: HA71E4018004
Manufacturer: Haimer USA LLC
Mfg #: E40.180.04

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .8800

$479.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" CAT 50 Shrink Fit Toolholder - 6.3" Gauge Length

Item #: GM30050630D50
Manufacturer: Briney
Mfg #: V50SF-050-

Technical Specifications:
*Bearing Surface: 1.457 *Bore Diameter: 1/2 *Brand Name: Briney *Gage Length: 6.299 *Outside Diameter: 1.260 *Shank: CAT50 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 8.5000

$496.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSKA125 2"X7" GL HD SHRINKFIT CHK

Item #: HA71A1251522Z6I
Manufacturer: Haimer USA LLC
Mfg #: A125.152.2

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 19.9122

$2,598.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CT40-SLK12-75F Master Holder

Item #: SG82CT4075F
Manufacturer: MST
Mfg #: CT40-SLK12

Technical Specifications:
*Brand Name: MST *Gage Length: 75mm *Model Number: CT40-SLK12-75F *Nose Diameter: 41mm *Nose Length: 55.95mm *Shank: CAT40 *Tool Clearance: 44.45mm *Weight: 1.4 lbs

Description:
*Type 12 Size for Shrink Collets up to 12mm (1/2") *Versatile 2 PC Type Design to reduce inventory *Drawbolt Design for easy and accurate assembly *Optional Flush Design for improved coolant delivery *ANSI Retention Knob Thread

Shipping Info:
*Actual Weight - 3.0500 *Dimensions - Height: 3.00 Length: 7.10 Width: 3.20

$410.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 10mm x 80mm Shrink Fit Chuck

Item #: HA7140840104
Manufacturer: Haimer USA LLC
Mfg #: 40.840.10.

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 40.840.10.4 *Outside Diameter: 32mm *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 4.0000

$340.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

E32-SLRA4-70

Item #: TP349911018
Manufacturer: OSG USA, Inc.
Mfg #: 9911018

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .1999

$559.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CS12-8-35

Item #: TP348910094
Manufacturer: OSG USA, Inc.
Mfg #: 8910094

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .3850 *Dimensions - Height: 1.20 Length: 3.20 Width: 1.30

$200.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/2 x 3.15 Power Shrink Fit Chuck

Item #: HA715084012Z37
Manufacturer: Haimer USA LLC
Mfg #: 50.840.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 50.840.1/2Z.37 *Outside Diameter: 1.26 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 8.0000

$1,204.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8" CAT 50 Shrink Fit Toolholder - 5.0" Gauge Length

Item #: GM3062500
Manufacturer: Briney
Mfg #: V50SF-062-

Technical Specifications:
*Bearing Surface: 1.250 *Bore Diameter: 5/8 *Brand Name: Briney *Gage Length: 5.000 *Outside Diameter: 1.375 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 9.5000

$468.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 5/8" Bore Dia. x 3.54 Gage Length Shrink Fit Toolholder

Item #: GM269079248
Manufacturer: Bilz
Mfg #: 9079248

Technical Specifications:
*Bearing Surface: 1.97 *Bore Diameter: 5/8" *Brand Name: Bilz *Gage Length: 3.54 *Outside Diameter: 1.34 *Shank: HSK-E40 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 1.3000

$269.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT50-SLK12-75 Master Holder

Item #: SG82BT5075
Manufacturer: MST
Mfg #: BT50-SLK12

Technical Specifications:
*Brand Name: MST *Flange Length: 12mm *Gage Length: 75mm *Model Number: BT50-SLK12-75 *Nose Diameter: 38mm *Nose Length: 25mm *Shank: BT50 *Tool Clearance: 65mm *Weight: 4 lbs

Description:
*Slimline profile for clearance *Versatile 2 Pc Type Design to reduce inventory *High Runout Accurace (5 Microns or better) for increased tool life *Stainless Steel Construction vs Competitors H13 allows for thin walls = more clearance *Small tools easily removed

Shipping Info:
*Actual Weight - 4.0000

$436.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63F 12MM SHRINK FIT HOLDER

Item #: GM76500883
Manufacturer: Lyndex
Mfg #: H63F-SF12-

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$303.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ST16-SLS3-115

Item #: TP348910125
Manufacturer: OSG USA, Inc.
Mfg #: 8910125

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .2300 *Dimensions - Height: 1.20 Length: 4.60 Width: 1.25

$424.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 14MMX200MM GL SHRINK FIT CHUCK

Item #: HA714064614
Manufacturer: Haimer USA LLC
Mfg #: 40.646.14

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 5.2800

$537.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK A 100 SRKIN 7/8X6-1/4

Item #: TG604504370
Manufacturer: Tungaloy
Mfg #: 4504370

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:
*Actual Weight - .0090

$679.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" CAT 50 Shrink Fit Toolholder - 5.0" Gauge Length

Item #: GM3038500
Manufacturer: Briney
Mfg #: V50SF-038-

Technical Specifications:
*Bearing Surface: .750 *Bore Diameter: 3/8 *Brand Name: Briney *Gage Length: 5.000 *Outside Diameter: 1.125 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 9.0000

$468.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/4 x 2.56 Power Shrink Fit Chuck

Item #: HA714084534Z37
Manufacturer: Haimer USA LLC
Mfg #: 40.845.3/4

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Haimer USA LLC *Gage Length: 2.56 *Model Number: 40.845.3/4Z.37 *Outside Diameter: 1.65 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 3.0000

$617.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It