Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (25001 Products)

Climax Metal Products - 1-1/2" Inside x 2-5/8" Outside Diam, Two Piece Rigid Coupling with Keyway - 3-7/8" Long x 3/8" Keyway Width x 3/16" Keyway Depth - USA Tool & Supply

Climax Metal Products - 1-1/2" Inside x 2-5/8" Outside Diam, Two Piece Rigid Coupling with Keyway - 3-7/8" Long x 3/8" Keyway Width x 3/16" Keyway Depth


Item #: 55552640
Brand: Climax Metal Products
Model #: 2ISCC-150-100KW
Exact Tooling IR#: 04

Product Specifications
Type Two Piece Coupling with Keyway
Inside Diameter (Decimal Inch) 1.5000
Inside Diameter (Inch) 1-1/2
Reduced Inside Diameter (Decimal Inch) 1.000
Outside Diameter (Inch) 2-5/8
Length (Inch) 3-7/8
Material Mild Steel-Black Oxide Plated
Keyway Width (Inch) 3/8
Keyway Depth (Inch) 3/16
PSC Code 5340

$332.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 115/208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56J Frame, J-Face Mount, 1 Speed, Ball Bearings, 18.2/9.2-9.1 Full Load Amps, B Class Insulation, CCW Drive End - USA Tool & Supply

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 115/208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56J Frame, J-Face Mount, 1 Speed, Ball Bearings, 18.2/9.2-9.1 Full Load Amps, B Class Insulation, CCW Drive End


Item #: 87959086
Brand: US Motors
Model #: EU1502
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure ODP
Horsepower 1-1/2
Thermal Protection Rating Auto
Name Plate RPMs 3450
Voltage 115/208-230
Frequency Hz 60
Frame Size 56J
Mount Type J-Face
Number of Speeds 1
Bearing Type Ball
Full Load Amperage 18.2/9.2-9.1
Insulation Class B
Full Load Efficiency Rating 80.30
Motor Run Capacitor Micro Farid 0.00
Motor Run Capacitor Volts 0
Service Factor Rating 1.30
Motor Rotation CCW Drive End
PSC Code 6105

$429.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Norgren - 3" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F - USA Tool & Supply

Norgren - 3" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F


Item #: 01514280
Brand: Norgren
Model #: A1233A1PS-2X3
Exact Tooling IR#: 04

Product Specifications
Type Single Acting
Bore Size (Inch) 2
Bore Size (Decimal Inch) 2.00
Rod Diameter (Inch) 5/8
Rod Diameter (Decimal Inch) 0.625
Stroke Length (Inch) 3
Port Size 3/8
Port Type NPTF
Maximum Working Pressure (psi) 250
Rod Thread Size 7/16-20
Style Square

$260.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - Modular Router Bit Accessories and Components Type: Shank Set For Use With: Corecut 38.1 / Corecut 45 - USA Tool & Supply

Controx - Modular Router Bit Accessories and Components Type: Shank Set For Use With: Corecut 38.1 / Corecut 45


Item #: 58135591
Brand: Controx
Model #: 74000150110000
Exact Tooling IR#: 04

Product Specifications

Modular Router Bit Accessories and Components; Type: Shank Set ; For Use With: Corecut 38.1 / Corecut 45
Type Shank Set
For Use With Corecut 38.1 / Corecut 45

$348.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 3" Blade Diam x x 0.1563" Blade Thickness, 1" Hole, 32 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, Uncoated, with Keyway - USA Tool & Supply

Controx - 3" Blade Diam x x 0.1563" Blade Thickness, 1" Hole, 32 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, Uncoated, with Keyway


Item #: 64000326
Brand: Controx
Model #: 244441
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Blade Diameter (Inch) 3
Blade Diameter (Decimal Inch) 3.00
Blade Thickness (Decimal Inch) 0.1563
Arbor Hole Diameter (Inch) 1
Tooth Configuration Staggered
Material Cobalt
Finish/Coating Uncoated
Number of Teeth 32
Keyway Yes
Material Grade M35
Rake Angle 15.000
Connection Type Arbor
Cutting Direction Right Hand

$229.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1", 2" LOC, 1" Shank Diam, 4" OAL, 5 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 1", 2" LOC, 1" Shank Diam, 4" OAL, 5 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 04490694
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 5
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Material Solid Carbide
Finish/Coating AlTiN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle Variable
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade C2
Minimum Helix Angle 30
Maximum Helix Angle 45
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$338.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 12mm, 31.8mm LOC, 12mm Shank Diam, 82.5mm OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Diamond Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - USA Tool & Supply

Sandvik Coromant - 12mm, 31.8mm LOC, 12mm Shank Diam, 82.5mm OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Diamond Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 38859138
Brand: Sandvik Coromant
Model #: 7254454
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Diamond (CVD) coated tools are the hardest of the coatings. It is used exclusively for applications in non-ferrous materials such as aluminum, graphite, copper and carbon fiber.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 12.00
Mill Diameter (Decimal Inch) 0.4724
Number of Flutes 6
Length of Cut (mm) 31.80
Material Solid Carbide
Finish/Coating Diamond
Shank Diameter (mm) 12.00
Single or Double End Single
Overall Length (mm) 82.50
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40
Flute Type Spiral
Manufacturer Grade O10M
Chipbreaker No
Series/List CoroMill Plura

$470.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Sandvik Coromant / Part #: 8248591

Brand: Sandvik Coromant / Part #: 8248591


Item #: 60785276
Brand: Sandvik Coromant
Model #: 8248591

Product Specifications

Thread Size (mm) M18x2.5
Number Of Flutes 4
Chamfer Plug
Thread Limit D7
Class Of Fit 6H
Coating/Finish TiAlN/WC/C
Threads per Inch 10
Material Powdered Metal
Coolant Through No
Thread Direction Right Hand
Thread Pitch (Decimal Inch) 0.0984
Thread Pitch (mm) 2.50
Thread Standard Metric
Thread Length (Decimal Inch) 1.1811
Thread Length (mm) 30.00
Overall Length (Decimal Inch) 4.9213
Overall Length (mm) 125.0000
Shank Diameter (mm) 13.7700
Shank Diameter (Decimal Inch) 0.542
Tapping Depth (mm) 195.00
Tapping Depth (Decimal Inch) 2.8347
Material Application Stainless Steel
Series CoroTap? 200

$167.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 1" Diam, Coarse Pitch, 3" LOC, 3 Flute Powdered Metal 0.06" Corner Radius Roughing End Mill - TiCN Finish, 5-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 42° Helix - USA Tool & Supply

Cleveland - 1" Diam, Coarse Pitch, 3" LOC, 3 Flute Powdered Metal 0.06" Corner Radius Roughing End Mill - TiCN Finish, 5-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 42° Helix


Item #: 48625362
Brand: Cleveland
Model #: C40042
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Pitch Coarse
Length of Cut (Inch) 3
Length of Cut (Decimal Inch) 3.0000
Shank Diameter (Inch) 1
End Type Corner Radius
Material Powdered Metal
Finish/Coating TiCN
Overall Length (Inch) 5-1/2
Centercutting Center Cutting
Helix Angle 42.00
Extended Reach No
Corner Radius (Decimal Inch) 0.0600
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Overall Length (Decimal Inch) 5.5000
Series/List PM-538R

$364.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - 10mm, 30mm LOC, 10mm Shank Diam, 80mm OAL, 10 Flute, Solid Carbide Square End Mill - Single End, Dura Finish, Helical Flute, 20° Helix, Right Hand Cut, Right Hand Flute, Series JC875 - USA Tool & Supply

Seco - 10mm, 30mm LOC, 10mm Shank Diam, 80mm OAL, 10 Flute, Solid Carbide Square End Mill - Single End, Dura Finish, Helical Flute, 20° Helix, Right Hand Cut, Right Hand Flute, Series JC875


Item #: 59260620
Brand: Seco
Model #: 42831
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Dura is a diamond coating has superior wear resistance and has good dimensional tolerance throughout the long tool life. Dura is a proprietary coating exclusive to Seco Tools, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (mm) 10.00
Mill Diameter (Decimal Inch) 0.3937
Number of Flutes 10
Length of Cut (mm) 30.00
Length of Cut (Decimal Inch) 1.1811
Material Solid Carbide
Finish/Coating Dura
Shank Diameter (mm) 10.00
Single or Double End Single
Overall Length (mm) 80.00
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 20
Flute Type Helical
Chipbreaker Yes
Extended Reach No
Series/List JC875

$456.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 20mm, 60mm LOC, 20mm Shank Diam, 126mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30/32° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3509 - USA Tool & Supply

Guhring - 20mm, 60mm LOC, 20mm Shank Diam, 126mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30/32° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3509


Item #: 58553843
Brand: Guhring
Model #: 9035090200000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 20.00
Mill Diameter (Decimal Inch) 0.7874
Number of Flutes 4
Length of Cut (mm) 60.00
Length of Cut (Decimal Inch) 2.3622
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (mm) 20.00
Single or Double End Single
Overall Length (mm) 126.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00/32.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Reach Length (mm) 76.00
Chipbreaker No
Extended Reach Yes
Series/List 3509

$410.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 12mm Diam, 10mm LOC, 2 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 92mm OAL, 16mm Shank Diam, Cylindrical Shank, 30° Helix, Stub Length - USA Tool & Supply

Emuge - 12mm Diam, 10mm LOC, 2 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 92mm OAL, 16mm Shank Diam, Cylindrical Shank, 30° Helix, Stub Length


Item #: 47930292
Brand: Emuge
Model #: 1996A.01216
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (mm) 12.00
End Type Toroidal
Corner Radius (mm) 4.00
Number of Flutes 2
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (mm) 10.0000
Shank Diameter (mm) 16
Overall Length (mm) 92
Centercutting Non-Center Cutting
Extended Reach ExtendedReach
Shank Type Cylindrical
Helix Angle 30
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) +0.01/-0.01
Series/List 1996A

$401.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 12mm, 31.8mm LOC, 12mm Shank Diam, 2-1/2" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Diamond Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - USA Tool & Supply

Sandvik Coromant - 12mm, 31.8mm LOC, 12mm Shank Diam, 2-1/2" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Diamond Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 38859393
Brand: Sandvik Coromant
Model #: 7254414
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Diamond (CVD) coated tools are the hardest of the coatings. It is used exclusively for applications in non-ferrous materials such as aluminum, graphite, copper and carbon fiber.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 12.00
Mill Diameter (Decimal Inch) 0.4724
Number of Flutes 6
Length of Cut (mm) 31.80
Material Solid Carbide
Finish/Coating Diamond
Shank Diameter (mm) 12.00
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40
Flute Type Spiral
Manufacturer Grade O12M
Chipbreaker No
Series/List CoroMill Plura

$456.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 1", 2-1/2" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series ST-630 - USA Tool & Supply

RobbJack - 1", 2-1/2" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series ST-630


Item #: 05311394
Brand: RobbJack
Model #: ST-630-32-T
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 6
Length of Cut (Inch) 2-1/2
Length of Cut (Decimal Inch) 2.5000
Material Solid Carbide
Finish/Coating TiN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.001/-0.000
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) +0.060/-0.060
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0002
Series/List ST-630

$413.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 2-7/32" Cut Diam, 1-3/32" Cut Width, 1-9/32" Neck Diam, 1-1/4" Shank Diam, 5-3/8" OAL, M42 Cobalt T-Slot Cutter - Uncoated, 1-1/4" Bolt, Straight Teeth, 10 Teeth - USA Tool & Supply

Interstate - 2-7/32" Cut Diam, 1-3/32" Cut Width, 1-9/32" Neck Diam, 1-1/4" Shank Diam, 5-3/8" OAL, M42 Cobalt T-Slot Cutter - Uncoated, 1-1/4" Bolt, Straight Teeth, 10 Teeth


Item #: 77419174
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 2-7/32
Cutting Width (Inch) 1-3/32
Neck Diameter (Inch) 1.2813
Shank Diameter (Inch) 1-1/4
Overall Length (Inch) 5-3/8
Material Cobalt
Finish/Coating Uncoated
Number of Teeth 10
Bolt Size (Inch) 1-1/4
Neck Length (Inch) 1-31/32
Tooth Configuration Straight
Material Grade M42
Weldon Flat No
Roughing No

$538.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Whitney Tool Co. - 1-7/8" Diam x 13/16" Width of Cut, 60° Included Angle, High Speed Steel Dovetail Cutter - 7/8" Shank Diam, 3-1/4" Overall Length, Weldon Flat, TiN Coated - USA Tool & Supply

Whitney Tool Co. - 1-7/8" Diam x 13/16" Width of Cut, 60° Included Angle, High Speed Steel Dovetail Cutter - 7/8" Shank Diam, 3-1/4" Overall Length, Weldon Flat, TiN Coated


Item #: 71835946
Brand: Whitney Tool Co.
Model #: 918760T
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Included Angle 60
Cutting Diameter (Inch) 1-7/8
Cutting Diameter (Decimal Inch) 1.8750
Cutting Width (Inch) 13/16
Cutting Width (Decimal Inch) 0.8125
Material High Speed Steel
Finish/Coating TiN
Shank Diameter (Inch) 7/8
Overall Length (Inch) 3-1/4
Number of Teeth 12
Weldon Flat Yes

$181.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4° 4" Cut Diam, 1/2" Cut Width, 1-1/4" Arbor, High Speed Steel Double-Angle Cutter - USA Tool & Supply

Made in USA - 4° 4" Cut Diam, 1/2" Cut Width, 1-1/4" Arbor, High Speed Steel Double-Angle Cutter


Item #: 73204422
Brand: Made in USA
Model #: DA4500-60-TIN

Product Specifications

Connection Type Arbor
Included Angle 60
Cutting Diameter (Inch) 4
Cutting Width (Inch) 1/2
Cutting Width (Decimal Inch) 0.5000
Material High Speed Steel
Finish/Coating TiN
Arbor Hole Diameter (Inch) 1-1/4
Number of Teeth 20

$438.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 1" Diam, Fine Pitch, 1-1/2" LOC, 4 Flute Solid Carbide Roughing Square End Mill - TiN Finish, 5" OAL, 1" Shank Diam, Single End, Centercutting, 30° Helix - USA Tool & Supply

RobbJack - 1" Diam, Fine Pitch, 1-1/2" LOC, 4 Flute Solid Carbide Roughing Square End Mill - TiN Finish, 5" OAL, 1" Shank Diam, Single End, Centercutting, 30° Helix


Item #: 01716414
Brand: RobbJack
Model #: STR-401-32-T
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Pitch Fine
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Shank Diameter (Inch) 1
End Type Square End
Material Solid Carbide
Finish/Coating TiN
Overall Length (Inch) 5
Centercutting Center Cutting
Helix Angle 30.00
Extended Reach No
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Stub
Mill Diameter Tolerance (Decimal Inch) -0.003/-0.007
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0002
Overall Length Tolerance (Decimal Inch) +0.060/-0.060
Series/List STR-401

$414.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 1", 1-1/4" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - USA Tool & Supply

SGS - 1", 1-1/4" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill


Item #: 86552890
Brand: SGS
Model #: 34751

Product Specifications

Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Material Solid Carbide
Finish/Coating TiB2
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 38.00
Variable Helix No
Variable Index No
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Series/List 43

$459.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1", 2" LOC, 1" Shank Diam, 4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 1", 2" LOC, 1" Shank Diam, 4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 72287840
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on non-ferrous materials including aluminum, brass, copper and titanium.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Material Solid Carbide
Finish/Coating ZrN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle Variable
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade C2
Minimum Helix Angle 30
Maximum Helix Angle 50
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$489.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It