Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (25001 Products)

Fenner Drives - Section 3L, 3/8" Wide, Adjustable Replacement Belt - Link Style V-Belt, No. 3L - USA Tool & Supply

Fenner Drives - Section 3L, 3/8" Wide, Adjustable Replacement Belt - Link Style V-Belt, No. 3L


Item #: 88075866
Brand: Fenner Drives
Model #: 0405010
Exact Tooling IR#: 04

Product Specifications
Belt Style Adjustable Replacement Belt
Belt Section 3L
Belt Width (Inch) 3/8
Belt Number 3L
Style Link Style V-Belt

$537.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SMC PNEUMATICS - 2" NPT Pipe, Refrigerated Air Dryer - USA Tool & Supply

SMC PNEUMATICS - 2" NPT Pipe, Refrigerated Air Dryer


Item #: 80167125
Brand: SMC PNEUMATICS
Model #: AMG-EL850
Exact Tooling IR#: 04

Product Specifications

2" NPT Pipe, Refrigerated Air Dryer -
Pipe Size (Inch) 2
Outlet Size (Inch) 2

$412.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, TEFC Enclosure, No Thermal Protection, 3,450 RPM, 208-220/440 Volt, 60/50 Hz, Three Phase Energy Efficient Motor - Size 56H Frame, Rigid Mount, 1 Speed, Ball Bearings, 4.8-4.6/2.4 Full Load Amps, B Class Insulation, Reversible - USA Tool & Supply

US Motors - 1.5 hp, TEFC Enclosure, No Thermal Protection, 3,450 RPM, 208-220/440 Volt, 60/50 Hz, Three Phase Energy Efficient Motor - Size 56H Frame, Rigid Mount, 1 Speed, Ball Bearings, 4.8-4.6/2.4 Full Load Amps, B Class Insulation, Reversible


Item #: 76507649
Brand: US Motors
Model #: T32S1AH
Exact Tooling IR#: 04

Product Specifications
Motor Type Three Phase Energy Efficient
Type of Enclosure TEFC
Horsepower 1-1/2
Thermal Protection Rating None
Name Plate RPMs 3450
Voltage 208-220/440
Frequency Hz 60/50
Frame Size 56H
Mount Type Rigid
Number of Speeds 1
Bearing Type Ball
Applications General Purpose
Full Load Amperage 4.8-4.6/2.4
Insulation Class B
Frame Material Steel
Overall Length (Decimal Inch) 12.2500
Shaft Diameter x Length (Inch) 5/8 x 1-7/8
Full Load Efficiency Rating 77.0
Service Factor Rating 1.15
Motor Rotation Reversible
PSC Code 6105

$341.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Guhring / Part #: 9065960099000

Brand: Guhring / Part #: 9065960099000


Item #: 74953217
Brand: Guhring
Model #: 9065960099000

Product Specifications

Drill Bit Size (Decimal Inch) 0.3898
Drill Bit Size (mm) 9.90
Tool Material Solid Carbide
Cutting Direction Right Hand
Coating/Finish Nano-FIREX
Drill Point Angle 180
Spiral Type Regular Spiral
Flute Type Helical
Point Type Flat-Bottom
Coolant Through Yes
Shank Type Straight
Number Of Flutes 2
Overall Length (mm) 87.0000
Shank Diameter (mm) 10.0000
Series 6596
Drill Length Type Screw Machine Length
Point Type flat
Maximum Drilling Depth (mm) 28.15
Shank Length (mm) 40.000
Flute By Diameter Ratio 3xD
Tool Performance High Performance
Drill Bit Diameter Tolerance N7
Flute Length (mm) 43.00

$168.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ARO/Ingersoll-Rand - 2" Stroke x 3" Bore Double Acting Air Cylinder - 3/8 Port, 3/4-10 Rod Thread - USA Tool & Supply

ARO/Ingersoll-Rand - 2" Stroke x 3" Bore Double Acting Air Cylinder - 3/8 Port, 3/4-10 Rod Thread


Item #: 35447390
Brand: ARO/Ingersoll-Rand
Model #: 2330-1009-020-M
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 3
Rod Diameter (Decimal Inch) 0.750
Stroke Length (Inch) 2
Port Size 3/8
Port Type NPTF
Rod Thread Size 3/4-10
Style Female
Cushions Non-Cushioned

$513.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Climax Metal Products - 40mm Inside x 77mm Outside Diam, One Piece Split Clamping Collar with Keyway - 108mm Long x 12mm Keyway Width x 5mm Keyway Depth - USA Tool & Supply

Climax Metal Products - 40mm Inside x 77mm Outside Diam, One Piece Split Clamping Collar with Keyway - 108mm Long x 12mm Keyway Width x 5mm Keyway Depth


Item #: 55550925
Brand: Climax Metal Products
Model #: MISCC-40-40-KW
Exact Tooling IR#: 04

Product Specifications
Type One Piece Split Clamping Collar with Keyway
Inside Diameter (mm) 40.0000
Reduced Inside Diameter (mm) 40
Outside Diameter (mm) 77.0000
Length (mm) 108.00
Material Mild Steel-Black Oxide Plated
Keyway Width (mm) 12.000
Keyway Depth (mm) 5.0
PSC Code 5340

$356.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Welch Vacuum - Standard Open Exhaust Filter - For Use with 8907, 8912 & 8717, 2-1/2" Diam x 4-1/2" High - USA Tool & Supply

Welch Vacuum - Standard Open Exhaust Filter - For Use with 8907, 8912 & 8717, 2-1/2" Diam x 4-1/2" High


Item #: 01816024
Brand: Welch Vacuum
Model #: 1417P-7
Exact Tooling IR#: 04

Product Specifications
Type Exhaust Filter
For Use With 8907; 8912; 8717
Diameter (Decimal Inch) 2.5000
Height (Inch) 4.50
PSC Code 4310

$655.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 1,725 RPM, 115/208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56 Frame, C-Face Mount, 1 Speed, Ball Bearings, 16.8/8.7-8.4 Full Load Amps, B Class Insulation, CCW Drive End - USA Tool & Supply

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 1,725 RPM, 115/208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56 Frame, C-Face Mount, 1 Speed, Ball Bearings, 16.8/8.7-8.4 Full Load Amps, B Class Insulation, CCW Drive End


Item #: 87958823
Brand: US Motors
Model #: EC1504
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure ODP
Horsepower 1-1/2
Thermal Protection Rating Auto
Name Plate RPMs 1725
Voltage 115/208-230
Frequency Hz 60
Frame Size 56
Mount Type C-Face
Number of Speeds 1
Bearing Type Ball
Full Load Amperage 16.8/8.7-8.4
Insulation Class B
Full Load Efficiency Rating 79.60
Motor Run Capacitor Micro Farid 40.00
Motor Run Capacitor Volts 0
Service Factor Rating 1.15
Motor Rotation CCW Drive End
PSC Code 6105

$341.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 44 - USA Tool & Supply

SGS - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 44


Item #: 00391714
Brand: SGS
Model #: 49672
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 18.00
Mill Diameter (Decimal Inch) 0.7087
Number of Flutes 2
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2600
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 18.00
Single or Double End Single
Overall Length (mm) 92.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Helix Style High
Mill Diameter Tolerance (mm) +0.000/-0.011
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (mm) +0.000/-0.011
Series/List 44

$473.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Niagara Cutter - 1", 3-1/4" LOC, 1" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A345 - USA Tool & Supply

Niagara Cutter - 1", 3-1/4" LOC, 1" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A345


Item #: 88863477
Brand: Niagara Cutter
Model #: N61670
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 3-1/4
Length of Cut (Decimal Inch) 3.2500
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 6
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) -0.0000/-0.0020
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) +0.0015/-0.0015
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List A345

$409.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 16mm, 60mm LOC, 16mm Shank Diam, 124mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - USA Tool & Supply

Sandvik Coromant - 16mm, 60mm LOC, 16mm Shank Diam, 124mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 54748967
Brand: Sandvik Coromant
Model #: 6260140
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 16.00
Mill Diameter (Decimal Inch) 0.6299
Number of Flutes 4
Length of Cut (mm) 60.00
Length of Cut (Decimal Inch) 2.3622
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 16.00
Single or Double End Single
Overall Length (mm) 124.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Material Grade 1630
Minimum Helix Angle 37
Maximum Helix Angle 37
Series/List CoroMill Plura

$426.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 3/4", 2-1/4" LOC, 3/4" Shank Diam, 5" OAL, 7 Flute, Solid Carbide Square End Mill - Single End, ALtima Blaze Finish, Spiral Flute, 38° Helix, Right Hand Cut, Right Hand Flute, Series 180CB - USA Tool & Supply

M.A. Ford - 3/4", 2-1/4" LOC, 3/4" Shank Diam, 5" OAL, 7 Flute, Solid Carbide Square End Mill - Single End, ALtima Blaze Finish, Spiral Flute, 38° Helix, Right Hand Cut, Right Hand Flute, Series 180CB


Item #: 58262866
Brand: M.A. Ford
Model #: 180L7500B
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
ALtima Blaze, a form of (AlCrN), has a higher oxidation temperature than TiAlN. It is used on nickel alloys, titanium and other difficult-to-machine materials. ALtima Blaze is a proprietary coating exclusive to M.A. Ford Mfg. Co., Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 7
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating ALtima Blaze
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 38.00
Flute Type Spiral
Length Type Long
Helix Style Medium High
Mill Diameter Tolerance (mm) +0.000/-0.0011
Minimum Helix Angle 38
Maximum Helix Angle 38
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (mm) +0.000/-0.0051
Series/List 180CB

$375.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 5/8", 2-1/2" LOC, 5/8" Shank Diam, 4-5/8" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiB2 Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 44 - USA Tool & Supply

SGS - 5/8", 2-1/2" LOC, 5/8" Shank Diam, 4-5/8" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiB2 Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 44


Item #: 42150631
Brand: SGS
Model #: 34524
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium diboride (TiB2) is a corrosion resistant ceramic compound made of titanium and boron. It is commonly used on nonferrous materials including aluminum and magnesium alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
Number of Flutes 2
Length of Cut (Inch) 2-1/2
Length of Cut (Decimal Inch) 2.5000
Material Solid Carbide
Finish/Coating TiB2
Shank Diameter (Inch) 5/8
Single or Double End Single
Overall Length (Inch) 4-5/8
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Length Type Stub
Mill Diameter Tolerance (Decimal Inch) +0.00000/-0.00043
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00043
Series/List 44

$473.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Left Hand Flute, Series 447 - USA Tool & Supply

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Left Hand Flute, Series 447


Item #: 55463715
Brand: OSG
Model #: 447-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Left Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List 447

$310.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 5/8" Diam, 3/4" LOC, 8 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 3" OAL, 5/8" Shank Diam, Cylindrical Shank, 50° Helix, Stub Length - USA Tool & Supply

Emuge - 5/8" Diam, 3/4" LOC, 8 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 3" OAL, 5/8" Shank Diam, Cylindrical Shank, 50° Helix, Stub Length


Item #: 47951801
Brand: Emuge
Model #: 2813A.0625
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 5/8
End Type Square
Corner Radius (Decimal Inch) 0.0500
Number of Flutes 8
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 5/8
Overall Length (Inch) 3
Centercutting Non-Center Cutting
Extended Reach ExtendedReach
Shank Type Cylindrical
Helix Angle 50
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) -0.0016
Series/List 2813A

$412.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S933 - USA Tool & Supply

DORMER - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S933


Item #: 65691834
Brand: DORMER
Model #: 0040195
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 18.00
Mill Diameter (Decimal Inch) 0.7092
Number of Flutes 3
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2608
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 18.00
Single or Double End Single
Overall Length (mm) 92.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker Yes
Extended Reach No
Series/List S933

$261.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4" Diam x 3/8" Width of Cut, 8 Teeth, Carbide Tipped Side Milling Cutter - Straight Teeth, Uncoated - USA Tool & Supply

Made in USA - 4" Diam x 3/8" Width of Cut, 8 Teeth, Carbide Tipped Side Milling Cutter - Straight Teeth, Uncoated


Item #: 00362202
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
Carbide tips cuts faster than high speed steel. The carbide tip is brazed onto the steel head of a shank. It is commonly used on ferrous and nonferrous metals including cast iron, steel and steel alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Cutter Diameter (Inch) 4
Cutting Width (Inch) 3/8
Cutting Width (Decimal Inch) 0.3750
Tooth Configuration Straight
Material Carbide-Tipped
Finish/Coating Uncoated
Arbor Hole Diameter (Inch) 1-1/4
Number of Teeth 8
Material Application Cast Iron

$455.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 8° Taper Angle per Side, 15mm Small End Diam, 3.5mm LOC, Solid Carbide 9 Flute Tapered Corner Radius End Mill - TiAlN Finish, 108mm OAL, 16mm Shank Diam, Spiral Flute, 20° Helix - USA Tool & Supply

Emuge - 8° Taper Angle per Side, 15mm Small End Diam, 3.5mm LOC, Solid Carbide 9 Flute Tapered Corner Radius End Mill - TiAlN Finish, 108mm OAL, 16mm Shank Diam, Spiral Flute, 20° Helix


Item #: 47938857
Brand: Emuge
Model #: 2678AZ.019010
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Corner Radius
Taper Angle Per Side 8.00
Small End Diameter (mm) 15.00
Shank Diameter (mm) 16
Length of Cut (mm) 3.50
Number of Flutes 9
Helix Angle 20
Finish/Coating TiAlN
Overall Length (mm) 108
Nose Radius (mm) 1.00
Flute Type Spiral
Flute Direction Right Hand
Series/List 2678AZ

$402.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Niagara Cutter - 1", 3-1/4" LOC, 1" Shank Diam, 6" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A245 - USA Tool & Supply

Niagara Cutter - 1", 3-1/4" LOC, 1" Shank Diam, 6" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A245


Item #: 85612919
Brand: Niagara Cutter
Model #: N61486
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 3-1/4
Length of Cut (Decimal Inch) 3.2500
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 6
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) -0.0000/-0.0020
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) +0.0015/-0.0015
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List A245

$507.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HP456 - USA Tool & Supply

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HP456


Item #: 55463533
Brand: OSG
Model #: HP460-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 60.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List HP456

$402.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It