Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (25001 Products)

RBC Bearings - 3-1/2" Roller Diam x 2" Width, 1-3/8" Stud Diam x 2-3/4" Length, Sealed Stud Cam Follower with Hex - Carbon Steel, 1-3/8" Thread Length, 1-3/8-12 Thread, 4-25/32" OAL, 36,100 Lb Dynamic Cap, 53,000 Lb Static Cap - USA Tool & Supply

RBC Bearings - 3-1/2" Roller Diam x 2" Width, 1-3/8" Stud Diam x 2-3/4" Length, Sealed Stud Cam Follower with Hex - Carbon Steel, 1-3/8" Thread Length, 1-3/8-12 Thread, 4-25/32" OAL, 36,100 Lb Dynamic Cap, 53,000 Lb Static Cap


Item #: 59168302
Brand: RBC Bearings
Model #: RBC3 1/2
Exact Tooling IR#: 04

Product Specifications
Type Sealed Stud Cam Follower with Hex
Roller Diameter (Decimal Inch) 3.5000
Roller Diameter (Inch) 3-1/2
Roller Width (Decimal Inch) 2.0000
Stud Diameter (Decimal Inch) 1.3750
Dynamic Load Capacity (Lb.) 36100
Static Load Capacity (Pounds) 53000.00
Length (Decimal Inch) 4.781
Thread Size 1-3/8-12
Material Carbon Steel
Stud Length (Decimal Inch) 2.7500
Stud Length (Inch) 2-3/4
Thread Length (Inch) 1-3/8
Hex Size (Inch) 5/8

$429.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1/4 hp, Totally Enclosed Fan Cooled, Manual Thermal Protection, 1,725 RPM, 115/208-230 Volt, 60 Hz, Cap Start Motor - Size 48 Frame, Rigid Mount, 1 Speed, Ball Bearings, 6.6/3.3 Full Load Amps, B Class Insulation - USA Tool & Supply

US Motors - 1/4 hp, Totally Enclosed Fan Cooled, Manual Thermal Protection, 1,725 RPM, 115/208-230 Volt, 60 Hz, Cap Start Motor - Size 48 Frame, Rigid Mount, 1 Speed, Ball Bearings, 6.6/3.3 Full Load Amps, B Class Insulation


Item #: 71051189
Brand: US Motors
Model #: T14CM2J4
Exact Tooling IR#: 04

Product Specifications
Motor Type Cap Start
Type of Enclosure Totally Enclosed Fan Cooled
Horsepower 1/4
Thermal Protection Rating Manual
Name Plate RPMs 1725
Voltage 115/208-230
Frequency Hz 60
Frame Size 48
Mount Type Rigid
Number of Speeds 1
Bearing Type Ball
Applications General Purpose
Full Load Amperage 6.6/3.3
Insulation Class B
Service Factor Rating 1.15
PSC Code 6105

$351.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Norgren - 8" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F - USA Tool & Supply

Norgren - 8" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F


Item #: 01513837
Brand: Norgren
Model #: A0177A1PS-2X8
Exact Tooling IR#: 04

Product Specifications
Type Single Acting
Bore Size (Inch) 2
Bore Size (Decimal Inch) 2.00
Rod Diameter (Inch) 5/8
Rod Diameter (Decimal Inch) 0.625
Stroke Length (Inch) 8
Port Size 3/8
Port Type NPTF
Maximum Working Pressure (psi) 250
Rod Thread Size 7/16-20
Style Square

$330.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ARO/Ingersoll-Rand - 6" Stroke x 2" Bore Double Acting Air Cylinder - 1/4 Port, 5/8-11 Rod Thread - USA Tool & Supply

ARO/Ingersoll-Rand - 6" Stroke x 2" Bore Double Acting Air Cylinder - 1/4 Port, 5/8-11 Rod Thread


Item #: 35447267
Brand: ARO/Ingersoll-Rand
Model #: 2420-1009-060-M
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 2
Rod Diameter (Decimal Inch) 0.630
Stroke Length (Inch) 6
Port Size 1/4
Port Type NPTF
Rod Thread Size 5/8-11
Style Female
Cushions Cushioned, Both Ends

$515.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 3/4" Diam, 5' Long, Stainless Steel Predrilled Round Linear Shafting - 50-55C Hardness, 0.031 Tolerance - USA Tool & Supply

Thomson Industries - 3/4" Diam, 5' Long, Stainless Steel Predrilled Round Linear Shafting - 50-55C Hardness, 0.031 Tolerance


Item #: 62302070
Brand: Thomson Industries
Model #: QSSS 3/4 LPD 60
Exact Tooling IR#: 04

Product Specifications
Style Predrilled
Diameter (Inch) 3/4
Length (Inch) 60
Length (Feet) 5
Material Stainless Steel
Hardness 50-55C

$674.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Vibco - 270 Lb. Force, 8-1/2 Cubic Feet per Minute, 7,200 RPM, 71 Decibel, Pneumatic Vibrator - 5-3/16" Long x 3-1/16" Wide x 3-7/16" High, 1/4 Port Inlet, 3/8 Port Outlet - USA Tool & Supply

Vibco - 270 Lb. Force, 8-1/2 Cubic Feet per Minute, 7,200 RPM, 71 Decibel, Pneumatic Vibrator - 5-3/16" Long x 3-1/16" Wide x 3-7/16" High, 1/4 Port Inlet, 3/8 Port Outlet


Item #: 36674661
Brand: Vibco
Model #: BVS-190
Exact Tooling IR#: 04

Product Specifications
Force (Pounds) 270.00
Cubic Feet per Minute (Inch) 8-1/2
RPM 7200.000
Decibel Rating 71
Width (Inch) 3-1/16
Height (Inch) 3-7/16
Length (Inch) 5-3/16
Port Size Inlet 1/4
Port Size Outlet 3/8
PSC Code 3820

$267.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Pacific Bearing - 2" Inside Diam, Closed Single Pillow Block Linear Bearing - 4-1/16" Overall Height x 6" Overall Width - USA Tool & Supply

Pacific Bearing - 2" Inside Diam, Closed Single Pillow Block Linear Bearing - 4-1/16" Overall Height x 6" Overall Width


Item #: 35417096
Brand: Pacific Bearing
Model #: P32
Exact Tooling IR#: 04

Product Specifications
Type Closed Single Pillow Block
Inside Diameter (Inch) 2
Centerline 2.125
Length From Base to Center of the Bore (Decimal Inch) 2.125
Overall Height (Decimal Inch) 4.0630
Overall Width (Decimal Inch) 6.0000

$402.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 1/4" Bolt, For 1" Diam Shaft, 48" Long, Aluminum Round Drilled Shaft Support Rail - 2-1/8" Base Width, 1/4" Base Thickness, 0.281" Mounting Hole Diam, 1-1/2" Btw Mount Hole Centers - USA Tool & Supply

Thomson Industries - 1/4" Bolt, For 1" Diam Shaft, 48" Long, Aluminum Round Drilled Shaft Support Rail - 2-1/8" Base Width, 1/4" Base Thickness, 0.281" Mounting Hole Diam, 1-1/2" Btw Mount Hole Centers


Item #: 62301775
Brand: Thomson Industries
Model #: SR16-PDL48
Exact Tooling IR#: 04

Product Specifications
For Shaft Diameter (Inch) 1
Overall Length (Inch) 48
Base Width (Inch) 2-1/8
Base Thickness (Inch) 1/4
Length Between Mounting Hole Centers (Inch) 6
Length Between Mounting Hole Center To End (Inch) 3
Width Between Mounting Hole Centers (Inch) 1-1/2
Mounting Hole Size Diameter (Decimal Inch) 0.2810
Bolt Size 1/4
Material Aluminum

$554.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 104mm OAL, 20mm Shank Diam, Cylindrical Shank, 38° Helix, Centercutting, Long Length - USA Tool & Supply

Emuge - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 104mm OAL, 20mm Shank Diam, Cylindrical Shank, 38° Helix, Centercutting, Long Length


Item #: 47927397
Brand: Emuge
Model #: 2698A.020030
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 20.00
End Type Square
Corner Radius (mm) 3.00
Number of Flutes 4
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (mm) 38.0000
Shank Diameter (mm) 20
Overall Length (mm) 104
Centercutting Center Cutting
Extended Reach ExtendedReach
Shank Type Cylindrical
Helix Angle 38
Single or Double End Single
Length Type Long
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) -0.05
Series/List 2698A

$413.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3147 - USA Tool & Supply

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3147


Item #: 58536434
Brand: Guhring
Model #: 9031470254000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3147

$448.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

American Tool Service - 1", 1-3/4" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

American Tool Service - 1", 1-3/4" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, Variable° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 43958057
Brand: American Tool Service
Model #: 315-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on non-ferrous materials including aluminum, brass, copper and titanium.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-3/4
Length of Cut (Decimal Inch) 1.7500
Material Solid Carbide
Finish/Coating ZrN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle Variable
Flute Type Spiral
Length Type Regular
Helix Style Medium High
Mill Diameter Tolerance (Decimal Inch) +0.000 to -0.002
Material Grade Micrograin
Minimum Helix Angle 39
TIR Maximum (Decimal Inch) 0.0010
Maximum Helix Angle 41
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) ±0.060
Shank Diameter Tolerance (Decimal Inch) +0.0000/-0.0005

$432.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 104mm OAL, 20mm Shank Diam, Weldon Shank, 38° Helix, Centercutting, Long Length - USA Tool & Supply

Emuge - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 104mm OAL, 20mm Shank Diam, Weldon Shank, 38° Helix, Centercutting, Long Length


Item #: 47938469
Brand: Emuge
Model #: 2699A.020030
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 20.00
End Type Square
Corner Radius (mm) 3.00
Number of Flutes 4
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (mm) 38.0000
Shank Diameter (mm) 20
Overall Length (mm) 104
Centercutting Center Cutting
Extended Reach ExtendedReach
Shank Type Weldon
Helix Angle 38
Single or Double End Single
Length Type Long
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) -0.05
Series/List 2699A

$413.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1", 2" LOC, 1" Shank Diam, 6" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 1", 2" LOC, 1" Shank Diam, 6" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 87657599
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Material Solid Carbide
Finish/Coating AlTiN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 6
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$475.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3152 - USA Tool & Supply

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3152


Item #: 58535659
Brand: Guhring
Model #: 9031520254000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 6
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3152

$448.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S922 - USA Tool & Supply

DORMER - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S922


Item #: 65693608
Brand: DORMER
Model #: 0040041
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 18.00
Mill Diameter (Decimal Inch) 0.7092
Number of Flutes 2
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2608
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 18.00
Single or Double End Single
Overall Length (mm) 92.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker Yes
Extended Reach No
Series/List S922

$255.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Whitney Tool Co. - 1" Diam x 7/16" Width of Cut, 60° Included Angle, Shank Connection, Carbide Tipped Single Angle Cutter - 1/2" Shank Diam, 2-1/2" Overall Length, Right Hand Cut, TiN Coated - USA Tool & Supply

Whitney Tool Co. - 1" Diam x 7/16" Width of Cut, 60° Included Angle, Shank Connection, Carbide Tipped Single Angle Cutter - 1/2" Shank Diam, 2-1/2" Overall Length, Right Hand Cut, TiN Coated


Item #: 03025905
Brand: Whitney Tool Co.
Model #: CH10060CT
Exact Tooling IR#: 04

Features and Benefits

Carbide tips cut faster than high speed steel. It is commonly used on ferrous and nonferrous materials including cast iron, steel and steel alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Connection Type Shank
Included Angle 60
Cutting Diameter (Inch) 1
Cutting Width (Inch) 7/16
Cutting Direction Right Hand
Material Carbide-Tipped
Finish/Coating TiN
Shank Diameter (Inch) 1/2
Overall Length (Inch) 2-1/2
Number of Teeth 6
Weldon Flat Yes

$154.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 460C - USA Tool & Supply

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 460C


Item #: 55463707
Brand: OSG
Model #: 460-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 60.00
Flute Type Spiral
Length Type Regular
Helix Style High
Chipbreaker No
Extended Reach No
Series/List 460C

$311.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 1", 2-5/8" LOC, 1" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 38° Helix, Right Hand Cut, Right Hand Flute, Series 43 - USA Tool & Supply

SGS - 1", 2-5/8" LOC, 1" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 38° Helix, Right Hand Cut, Right Hand Flute, Series 43


Item #: 08755696
Brand: SGS
Model #: 34726
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 2-5/8
Length of Cut (Decimal Inch) 2.6250
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 6
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 38.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Series/List 43

$473.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Walter-Prototyp - 16mm, 32mm LOC, 16mm Shank Diam, 92mm OAL, 16 Flute, Solid Carbide Square End Mill - TiAlSiN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series MC183 - USA Tool & Supply

Walter-Prototyp - 16mm, 32mm LOC, 16mm Shank Diam, 92mm OAL, 16 Flute, Solid Carbide Square End Mill - TiAlSiN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series MC183


Item #: 31008568
Brand: Walter-Prototyp
Model #: 7254440
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Silicon Nitride (TiAlSiN) is a high-performance coating designed for high heat and extreme cutting tool applications. It provides an excellent combination of heat and wear resistance.
Product Specifications
Mill Diameter (mm) 16.00
Mill Diameter (Decimal Inch) 0.6300
Number of Flutes 16
Length of Cut (mm) 32.00
Material Solid Carbide
Finish/Coating TiAlSiN
Shank Diameter (mm) 16.00
Overall Length (mm) 92.00
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30
Flute Type Spiral
Length Type Regular
Manufacturer Grade WB10TG
Series/List MC183

$469.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 1", 4-1/8" LOC, 1" Shank Diam, 7" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 138 - USA Tool & Supply

M.A. Ford - 1", 4-1/8" LOC, 1" Shank Diam, 7" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 138


Item #: 65781940
Brand: M.A. Ford
Model #: 13810008
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 4-1/8
Length of Cut (Decimal Inch) 4.1250
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 7
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 36.00
Chipbreaker No
Extended Reach No
Series/List 138

$537.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It