Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (25001 Products)

THK - 59mm L x 68mm W x 18mm H, 26mm Transverse Hole Spcg, 53mm Lateral Hole Spcg, 4 Way HRW Block - 13.5mm Overhang, 6.18 Kn Dynamic Capacity, M5x4.4 Hole, 11.5 kn Static Load Rating, 17" High Assembly - USA Tool & Supply

THK - 59mm L x 68mm W x 18mm H, 26mm Transverse Hole Spcg, 53mm Lateral Hole Spcg, 4 Way HRW Block - 13.5mm Overhang, 6.18 Kn Dynamic Capacity, M5x4.4 Hole, 11.5 kn Static Load Rating, 17" High Assembly


Item #: 00372607
Brand: THK
Model #: HRW21CA1UUGKBLO
Exact Tooling IR#: 04

Product Specifications
Type 4-Way Type HRW Block
Block Length (mm) 59.00
Block Width (mm) 68.00
Block Height (mm) 18.00
Transverse Hole Spacing (mm) 26.00
Lateral Hole Spacing (mm) 53.00
Hole Size M5x4.4
Assembly Height (mm) 17.00
Block Overhang (mm) 13.50
Static Load Rating (kN) 11.500
Dynamic Load Capacity (kN) 6.180

$345.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1/3 hp, TEFC Enclosure, No Thermal Protection, 1,725 RPM, 575 Volt, 60 Hz, Three Phase Standard Efficient Motor - Size 56 Frame, C-Face Mount, 1 Speed, Ball Bearings, 0.6 Full Load Amps, B Class Insulation, CW Lead End - USA Tool & Supply

US Motors - 1/3 hp, TEFC Enclosure, No Thermal Protection, 1,725 RPM, 575 Volt, 60 Hz, Three Phase Standard Efficient Motor - Size 56 Frame, C-Face Mount, 1 Speed, Ball Bearings, 0.6 Full Load Amps, B Class Insulation, CW Lead End


Item #: 81423022
Brand: US Motors
Model #: EE241-5
Exact Tooling IR#: 04

Product Specifications
Motor Type Three Phase Standard Efficient
Type of Enclosure TEFC
Horsepower 1/3
Thermal Protection Rating None
Name Plate RPMs 1725
Voltage 575
Frequency Hz 60
Frame Size 56
Mount Type C-Face
Number of Speeds 1
Bearing Type Ball
Applications Special Application
Full Load Amperage 0.6
Insulation Class B
Frame Material Steel
Overall Length (Decimal Inch) 11.6000
Full Load Efficiency Rating 76.5
Service Factor Rating 1.15
Motor Rotation CW Lead End
PSC Code 6105

$277.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Norgren - 6" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F - USA Tool & Supply

Norgren - 6" Stroke x 2" Bore Single Acting Air Cylinder - 3/8 Port, 7/16-20 Rod Thread, 250 Max psi, -20 to 200°F


Item #: 01513829
Brand: Norgren
Model #: A0133A1PS-2X6
Exact Tooling IR#: 04

Product Specifications
Type Single Acting
Bore Size (Inch) 2
Bore Size (Decimal Inch) 2.00
Rod Diameter (Inch) 5/8
Rod Diameter (Decimal Inch) 0.625
Stroke Length (Inch) 6
Port Size 3/8
Port Type NPTF
Maximum Working Pressure (psi) 250
Rod Thread Size 7/16-20
Style Square

$257.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 10mm Diam, 30mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Composite Plastics - USA Tool & Supply

SGS - 10mm Diam, 30mm LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Composite Plastics


Item #: 59007468
Brand: SGS
Model #: 82986
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (mm) 10.00
Cutting Diameter (Decimal Inch) 0.3937
End Type End Mill
Length of Cut (mm) 30.00
Length of Cut (Decimal Inch) 1.1811
Shank Diameter (mm) 10.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Diamond
Material Application Composite Plastics
Number of Flutes 8
Cutting Direction Right Hand
Shank Length (Decimal Inch) 1.2992

$454.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4" Blade Diam x 3/16" Blade Thickness, 1" Hole, 32 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, TiN, with Keyway - USA Tool & Supply

Made in USA - 4" Blade Diam x 3/16" Blade Thickness, 1" Hole, 32 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, TiN, with Keyway


Item #: 73084121
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Blade Diameter (Inch) 4
Blade Diameter (Decimal Inch) 4.00
Blade Thickness (Inch) 3/16
Blade Thickness (Decimal Inch) 0.1875
Arbor Hole Diameter (Inch) 1
Tooth Configuration Staggered
Material Cobalt
Finish/Coating TiN
Number of Teeth 32
Keyway Yes
Material Grade M42
Connection Type Arbor
Cutting Direction Right Hand

$406.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 22mm, 38mm LOC, 22mm Shank Diam, 102mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 403 - USA Tool & Supply

OSG - 22mm, 38mm LOC, 22mm Shank Diam, 102mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 403


Item #: 55463301
Brand: OSG
Model #: 403-866111
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 22.00
Mill Diameter (Decimal Inch) 0.8661
Number of Flutes 3
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4961
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 22.00
Single or Double End Single
Overall Length (mm) 102.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List 403

$279.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1", 1-1/4" LOC, 1" Shank Diam, 5" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 1", 1-1/4" LOC, 1" Shank Diam, 5" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, ZrN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 78088143
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on non-ferrous materials including aluminum, brass, copper and titanium.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Material Solid Carbide
Finish/Coating ZrN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Reach Length (Inch) 2-1/8
Chipbreaker No
Extended Reach Yes
Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$296.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Niagara Cutter - 1", 2" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A245 - USA Tool & Supply

Niagara Cutter - 1", 2" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series A245


Item #: 84008069
Brand: Niagara Cutter
Model #: N61484
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) -0.0000/-0.0020
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) +0.0015/-0.0015
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List A245

$432.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 7/8", 1-1/2" LOC, 7/8" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 403 - USA Tool & Supply

OSG - 7/8", 1-1/2" LOC, 7/8" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 403


Item #: 55463830
Brand: OSG
Model #: 403-875011
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 7/8
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List 403

$279.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4° 4" Cut Diam, 1/2" Cut Width, 1-1/4" Arbor, High Speed Steel Double-Angle Cutter - USA Tool & Supply

Made in USA - 4° 4" Cut Diam, 1/2" Cut Width, 1-1/4" Arbor, High Speed Steel Double-Angle Cutter


Item #: 73205429
Brand: Made in USA
Model #: DA4500-90-TIN

Product Specifications

Connection Type Arbor
Included Angle 90
Cutting Diameter (Inch) 4
Cutting Width (Inch) 1/2
Cutting Width (Decimal Inch) 0.5000
Material High Speed Steel
Finish/Coating TiN
Arbor Hole Diameter (Inch) 1-1/4
Number of Teeth 20

$406.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 2° Taper Angle per Side, 1/2" Small End Diam, 3-1/4" LOC, Solid Carbide 3 Flute Tapered Ball End Mill - 6" OAL, 3/4" Shank Diam - USA Tool & Supply

Accupro - 2° Taper Angle per Side, 1/2" Small End Diam, 3-1/4" LOC, Solid Carbide 3 Flute Tapered Ball End Mill - 6" OAL, 3/4" Shank Diam


Item #: 01734607
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Ball
Taper Angle Per Side 2.00
Small End Diameter (Inch) 1/2
Small End Diameter (Decimal Inch) 0.5000
Shank Diameter (Inch) 3/4
Length of Cut (Inch) 3-1/4
Length of Cut (Decimal Inch) 3.2500
Number of Flutes 3
Overall Length (Inch) 6
Nose Radius (Inch) 1/4
Centercutting Yes

$260.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 3/4", 2" LOC, 3/4" Shank Diam, 5" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Spiral Flute, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

M.A. Ford - 3/4", 2" LOC, 3/4" Shank Diam, 5" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Spiral Flute, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 58261280
Brand: M.A. Ford
Model #: 13875005W
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 3
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Material Solid Carbide
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 36.00
Flute Type Spiral
Length Type Long
Helix Style Medium High
Mill Diameter Tolerance (Decimal Inch) +0.0000 to -0.0005
Minimum Helix Angle 36
Maximum Helix Angle 36
Additional Information Modified Standard, Non-Returnable & Non-Cancelable
Chipbreaker No
Extended Reach No

$289.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 7/8", 1-1/2" LOC, 7/8" Shank Diam, 4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 402 - USA Tool & Supply

OSG - 7/8", 1-1/2" LOC, 7/8" Shank Diam, 4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 402


Item #: 55463897
Brand: OSG
Model #: 402-875011
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 2
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 7/8
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List 402

$279.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 7/8" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 7/8" Shank Diam, Spiral Flute - USA Tool & Supply

OSG - 7/8" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 7/8" Shank Diam, Spiral Flute


Item #: 55450845
Brand: OSG
Model #: 403-8750-BN
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Overall Length (Inch) 4
Shank Diameter (Inch) 7/8
Finish/Coating Uncoated
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Flute Type Spiral
Length Type Regular
Series/List 403BN
Cutting Direction Right Hand
Flute Direction Right Hand

$257.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 22mm Diam, 38mm LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 102mm OAL, 102mm Shank Diam, Spiral Flute - USA Tool & Supply

OSG - 22mm Diam, 38mm LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 102mm OAL, 102mm Shank Diam, Spiral Flute


Item #: 55448567
Brand: OSG
Model #: 403-8661-BN
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (mm) 22.00
Mill Diameter (Decimal Inch) 0.8661
Number of Flutes 3
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4961
Material Solid Carbide
Overall Length (mm) 102.00
Shank Diameter (mm) 102.00
Finish/Coating Uncoated
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Flute Type Spiral
Length Type Regular
Series/List 403BN
Cutting Direction Right Hand
Flute Direction Right Hand

$257.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - TiCN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 40° Helix - USA Tool & Supply

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - TiCN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 40° Helix


Item #: 58995754
Brand: SGS
Model #: 46229
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (mm) 20.00
Mill Diameter (Decimal Inch) 0.7874
Number of Flutes 4
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4961
Shank Diameter (mm) 20.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiCN
Overall Length (mm) 104.00
Centercutting Center Cutting
Helix Angle 40.00
Extended Reach No
Corner Radius (mm) 1.50
Corner Radius (Decimal Inch) 0.0591
Coolant Induced No
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular
Flute Type Spiral
Mill Diameter Tolerance (mm) +0.000/-0.100
Shank Diameter Tolerance (mm) +0.000/-0.010
Overall Length (Decimal Inch) 4.0945

$443.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - TiN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 40° Helix - USA Tool & Supply

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - TiN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 40° Helix


Item #: 05782669
Brand: SGS
Model #: 46228
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (mm) 20.00
Mill Diameter (Decimal Inch) 0.7874
Number of Flutes 4
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4961
Shank Diameter (mm) 20.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiN
Overall Length (mm) 104.00
Centercutting Center Cutting
Helix Angle 40.00
Extended Reach No
Corner Radius (mm) 1.50
Corner Radius (Decimal Inch) 0.0591
Coolant Induced No
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular
Flute Type Spiral
Mill Diameter Tolerance (mm) +0.000/-0.100
Shank Diameter Tolerance (mm) +0.000/-0.010
Overall Length (Decimal Inch) 4.0945

$443.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - AlTiN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 30° Helix - USA Tool & Supply

SGS - 20mm Diam, 38mm LOC, 4 Flute Solid Carbide 1.5mm Corner Radius Roughing End Mill - AlTiN Finish, 104mm OAL, 20mm Shank Diam, Single End, Centercutting, 30° Helix


Item #: 58997958
Brand: SGS
Model #: 46232
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (mm) 20.00
Mill Diameter (Decimal Inch) 0.7874
Number of Flutes 4
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4961
Shank Diameter (mm) 20.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating AlTiN
Overall Length (mm) 104.00
Centercutting Center Cutting
Helix Angle 30.00
Extended Reach No
Corner Radius (mm) 1.50
Corner Radius (Decimal Inch) 0.0591
Coolant Induced No
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular
Flute Type Spiral
Mill Diameter Tolerance (mm) +0.000/-0.100
Shank Diameter Tolerance (mm) +0.000/-0.013
Overall Length (Decimal Inch) 4.0945

$443.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1-1/4" Diam, Fine Pitch, 4" LOC, 6 Flute Cobalt Roughing Square End Mill - Uncoated, 6-1/2" OAL, 1-1/4" Shank Diam, Single End, Centercutting, 30° Helix - USA Tool & Supply

OSG - 1-1/4" Diam, Fine Pitch, 4" LOC, 6 Flute Cobalt Roughing Square End Mill - Uncoated, 6-1/2" OAL, 1-1/4" Shank Diam, Single End, Centercutting, 30° Helix


Item #: 75021188
Brand: OSG
Model #: 4612500
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.2500
Number of Flutes 6
Pitch Fine
Length of Cut (Inch) 4
Length of Cut (Decimal Inch) 4.0000
Shank Diameter (Inch) 1-1/4
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 6-1/2
Centercutting Center Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Long
Series/List 460

$415.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 5° Taper Angle per Side, 5/8" Small End Diam, 5" LOC, High Speed Steel 4 Flute Tapered Square End Mill - 7-1/2" OAL, 1-1/4" Shank Diam, Spiral Flute - USA Tool & Supply

Made in USA - 5° Taper Angle per Side, 5/8" Small End Diam, 5" LOC, High Speed Steel 4 Flute Tapered Square End Mill - 7-1/2" OAL, 1-1/4" Shank Diam, Spiral Flute


Item #: 08078503
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Product Specifications
Material High Speed Steel
End Type Square
Taper Angle Per Side 5.00
Small End Diameter (Inch) 5/8
Small End Diameter (Decimal Inch) 0.6250
Shank Diameter (Inch) 1-1/4
Length of Cut (Inch) 5
Length of Cut (Decimal Inch) 5.0000
Number of Flutes 4
Finish/Coating Uncoated
Overall Length (Inch) 7-1/2
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes

$387.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It