Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

DeWALT - 5" Diam Grinder Dust Shroud - For Use with Dewalt 4 to 5" Grinders - USA Tool & Supply

DeWALT - 5" Diam Grinder Dust Shroud - For Use with Dewalt 4 to 5" Grinders


Item #: 36044592
Brand: DeWALT
Model #: DWE46152
Exact Tooling IR#: 04

Product Specifications
Accessory Type Grinder Dust Shroud
For Use With Dewalt 4" - 5" Grinders
Diameter (mm) 127
Diameter (Inch) 5
Contents Dust Shroud
PSC Code 3405

$120.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Browning - 15/16" ID, 5-1/2" OAL x 2-13/16" OAH Pillow Block - 1,651 Lb Static Cap, 2,801 Lb Dyn Cap, 4-1/8" Btw Mnt Hole Ctrs, 1-7/16" Base-to-Ctr Ht, Cast Iron - USA Tool & Supply

Browning - 15/16" ID, 5-1/2" OAL x 2-13/16" OAH Pillow Block - 1,651 Lb Static Cap, 2,801 Lb Dyn Cap, 4-1/8" Btw Mnt Hole Ctrs, 1-7/16" Base-to-Ctr Ht, Cast Iron


Item #: 82732892
Brand: Browning
Model #: VPS-215
Exact Tooling IR#: 04

Product Specifications
Type Pillow Block
Inside Diameter (Inch) 15/16
Width (Inch) 1-13/32
Overall Length (Inch) 5-1/2
Overall Height (Inch) 2-13/16
Static Load Capacity (Pounds) 1651.00
Dynamic Load Capacity (Pounds) 2801
Distance Between Mounting Hole Centers (Decimal Inch) 4.1250
Distance Between Mounting Hole Centers (Inch) 4-1/8
Material Cast Iron
Distance Between Base And Center (Decimal Inch) 1.4380
Distance Between Base And Center (Inch) 1-7/16
Insert Material 52100 Steel
Lock Type Set Screw
Bolt Size (Inch) 3/8

$136.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1-7/16" Diam, 3' Long, 1018 Steel Keyed Round Linear Shafting - 3/8" Key - USA Tool & Supply

Made in USA - 1-7/16" Diam, 3' Long, 1018 Steel Keyed Round Linear Shafting - 3/8" Key


Item #: 85510782
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Style Keyed
Diameter (Inch) 1-7/16
Length (Inch) 36
Length (Feet) 3
Material Steel
Material Grade 1018
Key Size (Inch) 3/8

$157.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1-1/4" ID, 6-15/32" OAL x 1-3/4" OAH 2-Bolt Flange Mounted Bearing - 3,462 Lb Static Cap, 5,777 Lb Dyn Cap, 5-1/8" Btw Mnt Hole Ctrs, 3/4" Base-to-Ctr Ht, Thermoplastic - USA Tool & Supply

Value Collection - 1-1/4" ID, 6-15/32" OAL x 1-3/4" OAH 2-Bolt Flange Mounted Bearing - 3,462 Lb Static Cap, 5,777 Lb Dyn Cap, 5-1/8" Btw Mnt Hole Ctrs, 3/4" Base-to-Ctr Ht, Thermoplastic


Item #: 69973469
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2 Bolt Flange Mounted Bearing
Inside Diameter (Decimal Inch) 1.2500
Inside Diameter (Inch) 1-1/4
Width (Inch) 3.531
Width (Decimal Inch) 3.5313
Overall Length (Inch) 6-15/32
Overall Length (Decimal Inch) 6.4688
Overall Height (Inch) 1-3/4
Overall Height (Decimal Inch) 1.7500
Static Load Capacity (Pounds) 3462.00
Dynamic Load Capacity (Pounds) 5777
Distance Between Mounting Hole Centers (Decimal Inch) 5.1250
Distance Between Mounting Hole Centers (Inch) 5-1/8
Material Thermoplastic Housing with Zinc Chromate Plated Bearing Insert
Distance Between Base And Center (Decimal Inch) 0.7500
Distance Between Base And Center (Inch) 3/4
Lock Type Set Screw
Bolt Size (Inch) 1/2
Bolt Size (Decimal Inch) 0.5000

$109.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - 3/8" NPT, 150 Max psi Compact Micro Mist Lubricator - Polycarbonate Bowl with Sight Glass, Zinc Body, 40 CFM, 125°F Max Temp, 2" Wide x 7.38" High - USA Tool & Supply

Parker - 3/8" NPT, 150 Max psi Compact Micro Mist Lubricator - Polycarbonate Bowl with Sight Glass, Zinc Body, 40 CFM, 125°F Max Temp, 2" Wide x 7.38" High


Item #: 56602261
Brand: Parker
Model #: 15L22NA
Exact Tooling IR#: 04

Product Specifications
Type Compact
Port Size NPT 3/8
Maximum Working Pressure (psi) 150
Body Material Zinc
Bowl Material Polycarbonate
Cubic Feet per Minute 40.00
Maximum Temperature (F) 125
Includes Sight Glass Yes
Drain Type No Drain
Seal Material Nitrile
Bowl Capacity 2
Modular Connection Yes
Height (Inch) 7.38
Width (Decimal Inch) 2.0000
Bowl Guard Yes
Additional Information Micro Mist Lubricator

$96.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Universal Tool - 1" Outlet, 100 Max psi, Inline Filters, Regulators & Lubricators - 350 CFM, Large Capacity In-Line Oilers, 10" Long x 4-1/4" High x 3-3/8" Wide - USA Tool & Supply

Universal Tool - 1" Outlet, 100 Max psi, Inline Filters, Regulators & Lubricators - 350 CFM, Large Capacity In-Line Oilers, 10" Long x 4-1/4" High x 3-3/8" Wide


Item #: 00093328
Brand: Universal Tool
Model #: UT-9340-1
Exact Tooling IR#: 04

Product Specifications
Type Large Capacity In-Line Oilers
Outlet Size (Inch) 1
Oil Capacity 16.0
Length (Decimal Inch) 10.000
Height (Inch) 4.250
Width (Decimal Inch) 3.3750

$145.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Browning - 3/4" Bore, 1-15/32 Long, 10-1/4" Outside Diam, Finished Bore Single Groove V Belt Sheave - 3/4" Wide, 9.66" Pitch Diam of 3L Belt, 10" Pitch Diam of 4L Belt - USA Tool & Supply

Browning - 3/4" Bore, 1-15/32 Long, 10-1/4" Outside Diam, Finished Bore Single Groove V Belt Sheave - 3/4" Wide, 9.66" Pitch Diam of 3L Belt, 10" Pitch Diam of 4L Belt


Item #: 00755421
Brand: Browning
Model #: AK104X3/4
Exact Tooling IR#: 04

Product Specifications
Bore Diameter (Inch) 3/4
Type Single Groove Sheave
Width (Inch) 3/4
Outside Diameter (Decimal Inch) 10.2500
Pitch Diameter of Belt Type 3L (Decimal Inch) 9.66
Pitch Diameter of Belt Type 4L or A (Decimal Inch) 10.00
Overall Length through Bore (Inch) 1-15/32
PSC Code 3020

$138.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Tritan - 85mm Bore Diam, 150.1mm OD, 1-3/4" Wide, Tapered Roller Bearing Set - 83,671 N Dynamic Load Capacity, 458,968 N Static Load Capacity - USA Tool & Supply

Tritan - 85mm Bore Diam, 150.1mm OD, 1-3/4" Wide, Tapered Roller Bearing Set - 83,671 N Dynamic Load Capacity, 458,968 N Static Load Capacity


Item #: 91756734
Brand: Tritan
Model #: 749/742
Exact Tooling IR#: 04

Product Specifications
Type. Tapered Roller Bearing Set
Bore Diameter (Decimal Inch) 3.3475
Bore Diameter (mm) 85.000
Static Load Capacity 458968
Dynamic Load Capacity (N) 83671
Dynamic Load Capacity Lbs per Foot (Feet) 18810.000
Outside Diameter (Decimal Inch) 5.9090
Outside Diameter (mm) 150.1000
Width (Decimal Inch) 1.7500
Width (mm) 44.50

$175.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 20mm Bore Diam, 52mm Outside Diam, 15mm Wide Cylindrical Roller Bearing - 30,800 N Dynamic Capacity, 26,000 Lbs. Static Capacity - USA Tool & Supply

SKF - 20mm Bore Diam, 52mm Outside Diam, 15mm Wide Cylindrical Roller Bearing - 30,800 N Dynamic Capacity, 26,000 Lbs. Static Capacity


Item #: 43340785
Brand: SKF
Model #: NJ 304 ECP
Exact Tooling IR#: 04

Product Specifications
Type. Cylindrical
Bore Diameter (mm) 20.000
Static Load Capacity 26000
Dynamic Load Capacity (N) 30800
Outside Diameter (mm) 52.0000
Width (mm) 15.00

$143.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

McGill - 2-1/4" Roller Diam x 1-1/4" Width, 7/8" Stud Diam x 2" Length, Sealed Heavy Stud Cam Follower - Steel, 1" Thread Length, 1-1/8-12 Thread, 3.28" OAL, 8,090 Lb Dynamic Cap, 21,140 Lb Static Cap - USA Tool & Supply

McGill - 2-1/4" Roller Diam x 1-1/4" Width, 7/8" Stud Diam x 2" Length, Sealed Heavy Stud Cam Follower - Steel, 1" Thread Length, 1-1/8-12 Thread, 3.28" OAL, 8,090 Lb Dynamic Cap, 21,140 Lb Static Cap


Item #: 92611300
Brand: McGill
Model #: CFH 2 1/4 S
Exact Tooling IR#: 04

Product Specifications
Type Sealed Heavy Stud Cam Follower
Roller Diameter (Decimal Inch) 2.2500
Roller Diameter (Inch) 2-1/4
Roller Width (Decimal Inch) 1.2500
Roller Width (Inch) 1-1/4
Stud Diameter (Decimal Inch) 1.1250
Dynamic Load Capacity (Lb.) 8090
Dynamic Load Capacity (N) 35984
Static Load Capacity (Pounds) 21140.00
Static Load Capacity 94031
Length (Decimal Inch) 3.280
Thread Size 1-1/8-12
Material Steel
Stud Length (Decimal Inch) 2.0000
Stud Length (Inch) 2
Thread Length (Inch) 1
McGill Part Number CFH 2 1/4 S
Roller Type Needle Roller

$160.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Norgren - 3" Stroke x 2" Bore Single Acting Air Cylinder - 1/4 Port, 1/2-20 Rod Thread - USA Tool & Supply

Norgren - 3" Stroke x 2" Bore Single Acting Air Cylinder - 1/4 Port, 1/2-20 Rod Thread


Item #: 36697431
Brand: Norgren
Model #: RP200X3.000-SAN
Exact Tooling IR#: 04

Product Specifications
Type Single Acting
Bore Size (Inch) 2
Bore Size (Decimal Inch) 2.00
Rod Diameter (Decimal Inch) 0.625
Stroke Length (Inch) 3
Stroke Length (Decimal Inch) 3.0000
Port Size 1/4
Port Type NPTF
Length (Decimal Inch) 8.660
Mount Thread 1-1/4-12
Rod Thread Size 1/2-20

$124.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 12mm Diam, 400mm Long, Steel Coaxial Hole Round Linear Shafting - 60C Hardness - USA Tool & Supply

Thomson Industries - 12mm Diam, 400mm Long, Steel Coaxial Hole Round Linear Shafting - 60C Hardness


Item #: 60513645
Brand: Thomson Industries
Model #: 12MMSMCH L400MM
Exact Tooling IR#: 04

Product Specifications
Style Coaxial Hole
Diameter (mm) 12.0000
Length (Inch) 16
Length (mm) 400.00
Material Steel
Hardness 60C

$228.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 20mm Bore Diam, 47mm OD, Double Seal Angular Contact Radial Ball Bearing - 20.6mm Wide, 2 Rows, Round Bore, 12,000 Lb Static Capacity, 19,000 Lb Dynamic Capacity - USA Tool & Supply

SKF - 20mm Bore Diam, 47mm OD, Double Seal Angular Contact Radial Ball Bearing - 20.6mm Wide, 2 Rows, Round Bore, 12,000 Lb Static Capacity, 19,000 Lb Dynamic Capacity


Item #: 45672177
Brand: SKF
Model #: 3204 A-2RS1
Exact Tooling IR#: 04

Features and Benefits

Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Angular Contact
Style Double Seal
Bore Diameter (mm) 20.00
Outside Diameter (mm) 47.00
Outside Diameter (Decimal Inch) 1.8500
Width (Decimal Inch) 0.8100
Width (mm) 20.60
Flange Type Without Flange
Number of Rows 2
Bore Type Round
Contact Angle 30
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 12000
Dynamic Load Capacity (Lb.) 19000
Maximum RPM 9000

$113.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Melin Tool - 7/8", 1-5/8" LOC, 1/2" Shank Diam, 3-5/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Melin Tool - 7/8", 1-5/8" LOC, 1/2" Shank Diam, 3-5/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 57811168
Brand: Melin Tool
Model #: 15854
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 4
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3-5/8
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.0015/-0.0000
Material Grade M42
Chipbreaker No
Extended Reach No

$73.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, Uncoated, 3-1/2" OAL, 3/4" Shank Diam - USA Tool & Supply

Interstate - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, Uncoated, 3-1/2" OAL, 3/4" Shank Diam


Item #: 01826783
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Material High Speed Steel
Single or Double End Single
Radius (Inch) 3/8
Radius (Decimal Inch) 0.3750
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.2500
Number of Flutes 4
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Overall Length (Inch) 3-1/2
Cutting Direction Right Hand
Material Grade M2
Flute Direction Right Hand

$95.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, Uncoated, 3-1/2" OAL, 1/2" Shank Diam - USA Tool & Supply

Interstate - 3/8" Radius, 1-1/4" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, Uncoated, 3-1/2" OAL, 1/2" Shank Diam


Item #: 01826247
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Material High Speed Steel
Single or Double End Single
Radius (Inch) 3/8
Radius (Decimal Inch) 0.3750
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.2500
Number of Flutes 4
Finish/Coating Uncoated
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3-1/2
Cutting Direction Right Hand
Material Grade M2
Flute Direction Right Hand

$95.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 1-1/2" Diam x 1/4" Face Width, Cobalt, 16 Teeth, Shank Connection Woodruff Keyseat Cutter - Uncoated, 2-1/4" OAL x 1/2" Shank, Staggered Teeth, ANSI 812, Old Standard 24 - USA Tool & Supply

Interstate - 1-1/2" Diam x 1/4" Face Width, Cobalt, 16 Teeth, Shank Connection Woodruff Keyseat Cutter - Uncoated, 2-1/4" OAL x 1/2" Shank, Staggered Teeth, ANSI 812, Old Standard 24


Item #: 02963247
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

Staggered tooth cutters are used at higher speeds for larger and deeper cutting operations. They have fewer teeth than straight cutters for better chip removal from the workpiece.
Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Connection Type Shank
Old Standard Number 24
American Standard Number (ANSI) 812
Cutting Diameter (Inch) 1-1/2
Cutting Diameter (Decimal Inch) 1.5000
Cutting Width (Inch) 1/4
Cutting Width (Decimal Inch) 0.2500
Tooth Configuration Staggered
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 1/2
Overall Length (Inch) 2-1/4
Number of Teeth 16
Material Grade M42

$79.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - TiCN Finish, Weldon Shank, 30° Helix, Centercutting, Extra Long Length - USA Tool & Supply

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - TiCN Finish, Weldon Shank, 30° Helix, Centercutting, Extra Long Length


Item #: 65635906
Brand: DORMER
Model #: 0356357
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 9.00
Mill Diameter (Decimal Inch) 0.3546
End Type Square
Number of Flutes 4
Material Powdered Metal
Finish/Coating TiCN
Length of Cut (mm) 38
Length of Cut (Decimal Inch) 1.4972
Shank Diameter (mm) 10
Overall Length (mm) 88
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 30
Single or Double End Single
Length Type Extra Long
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) +0.058/0.000
Series/List C295

$103.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 3/4" Diam x 0.1562" Blade Thickness x 1/4" Arbor Hole Diam, 20 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - USA Tool & Supply

RobbJack - 3/4" Diam x 0.1562" Blade Thickness x 1/4" Arbor Hole Diam, 20 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02114189
Brand: RobbJack
Model #: C07-1562-08-20
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 0.75
Blade Diameter (Inch) 3/4
Blade Thickness (Decimal Inch) 0.1562
Arbor Hole Diameter (Inch) 1/4
Connection Type Arbor
Number of Teeth 20
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Cast Iron; Stainless Steel; Steel; Super Alloy; Titanium
Tooth Configuration Straight

$121.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

SGS - 18mm, 32mm LOC, 18mm Shank Diam, 92mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 58994047
Brand: SGS
Model #: 45469
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 18.00
Mill Diameter (Decimal Inch) 0.7087
Number of Flutes 4
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2598
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 18.00
Single or Double End Single
Overall Length (mm) 92.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (mm) +0.000/-0.070
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (mm) +0.000/-0.011

$155.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It