Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

DeWALT - 4-1/2" Wheel Diam, 11,000 RPM, Corded Angle & Disc Grinder - 5/8-11 Spindle, 120 Volts, 11 Amps - USA Tool & Supply

DeWALT - 4-1/2" Wheel Diam, 11,000 RPM, Corded Angle & Disc Grinder - 5/8-11 Spindle, 120 Volts, 11 Amps


Item #: 43832583
Brand: DeWALT
Model #: DWE402
Exact Tooling IR#: 04

Product Specifications
Type of Power Corded
Wheel Diameter (Inch) 4-1/2
Speed (RPM) 11000
Spindle Size 5/8-11
Contents Side Handle
Amperage 11.00
Voltage 120
Triggerlock Yes
Switch Type Paddle w/Lock-on
PSC Code 3405

$149.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 15mm Bore Diam, 24mm OD, Double Seal Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 180 Lb Static Capacity, 351 Lb Dynamic Capacity - USA Tool & Supply

SKF - 15mm Bore Diam, 24mm OD, Double Seal Thin Section Radial Ball Bearing - 5mm Wide, 1 Row, Round Bore, 180 Lb Static Capacity, 351 Lb Dynamic Capacity


Item #: 78053121
Brand: SKF
Model #: 61802-2RS1
Exact Tooling IR#: 04

Features and Benefits

Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Thin Section
Style Double Seal
Bore Diameter (mm) 15.00
Outside Diameter (mm) 24.00
Width (mm) 5.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 180
Dynamic Load Capacity (Lb.) 351

$136.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - Section 5V, V-Belt - Neoprene Rubber, Narrow Banded, No. 5V1320 - USA Tool & Supply

Value Collection - Section 5V, V-Belt - Neoprene Rubber, Narrow Banded, No. 5V1320


Item #: 35393347
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Belt Style V-Belts
Belt Section 5V
Belt Number 5V1320
Number of Ribs 3.000
Material Neoprene Rubber
Style Narrow Banded

$403.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SMC PNEUMATICS - 1-1/2" Bore Double Acting Air Cylinder - 1/8 Port, 7/16-20 Rod Thread, 140 Max psi, 40 to 140°F - USA Tool & Supply

SMC PNEUMATICS - 1-1/2" Bore Double Acting Air Cylinder - 1/8 Port, 7/16-20 Rod Thread, 140 Max psi, 40 to 140°F


Item #: 05447750
Brand: SMC PNEUMATICS
Model #: NCDGBN40-1000
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 1-1/2
Bore Size (mm) 40.00
Rod Diameter (Decimal Inch) 0.630
Stroke Length (Decimal Inch) 10.0000
Mounting Style Basic
Port Size 1/8
Port Type NPT
Width (Decimal Inch) 1.8500
Length (Decimal Inch) 14.770
Distance Between Centers Width (Decimal Inch) 1.020
Mount Thread 1/4-28
Material Aluminum Alloy
Seal Material Buna-N
Maximum Working Pressure (psi) 140
Rod Thread Size 7/16-20

$159.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Boston Gear - 8 Pitch, 3" Pitch Diam, 24 Tooth Miter Gear - 0.66" Face Width, 3/4" Bore Diam, 1-3/4" Hub Diam, 20° Pressure Angle, Steel - USA Tool & Supply

Boston Gear - 8 Pitch, 3" Pitch Diam, 24 Tooth Miter Gear - 0.66" Face Width, 3/4" Bore Diam, 1-3/4" Hub Diam, 20° Pressure Angle, Steel


Item #: 36682888
Brand: Boston Gear
Model #: L115Y
Exact Tooling IR#: 04

Product Specifications
Type Miter Gear
Number of Teeth 24
Hub Diameter (Decimal Inch) 1.7500
Pitch Diameter (Decimal Inch) 3.0000
Bore Diameter (Inch) 3/4
Material Steel
Face Width (Decimal Inch) 0.6600
Pressure Angle 20
PSC Code 3020

$139.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 5mm, 16mm LOC, 5mm Shank Diam, 50mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S933 - USA Tool & Supply

DORMER - 5mm, 16mm LOC, 5mm Shank Diam, 50mm OAL, 3 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series S933


Item #: 65691875
Brand: DORMER
Model #: 0040102
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 5.00
Mill Diameter (Decimal Inch) 0.1970
Number of Flutes 3
Length of Cut (mm) 16.00
Length of Cut (Decimal Inch) 0.6304
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 5.00
Single or Double End Single
Overall Length (mm) 50.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker Yes
Extended Reach No
Series/List S933

$42.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 45° Helix, Centercutting, Extra Long Length - USA Tool & Supply

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 45° Helix, Centercutting, Extra Long Length


Item #: 65644759
Brand: DORMER
Model #: 0076132
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Aluminum chromium nitride (AlCrN) has a higher heat resistance than AlTiN. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 10.00
Mill Diameter (Decimal Inch) 0.3940
End Type Square
Number of Flutes 4
Material Powdered Metal
Finish/Coating AlCrN
Length of Cut (mm) 45
Length of Cut (Decimal Inch) 1.7730
Shank Diameter (mm) 10
Overall Length (mm) 95
Centercutting Center Cutting
Extended Reach ExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 45
Single or Double End Single
Length Type Extra Long
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) +0.058/0.000
Series/List C920

$102.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ProMax - 9/16" Diam, 1-1/4" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - TiCN Finish, 3-1/2" OAL, 9/16" Shank Diam, Straight Shank, 40° Helix, Centercutting, Regular Length - USA Tool & Supply

ProMax - 9/16" Diam, 1-1/4" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - TiCN Finish, 3-1/2" OAL, 9/16" Shank Diam, Straight Shank, 40° Helix, Centercutting, Regular Length


Item #: 76683358
Brand: ProMax
Model #: 120-03612
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 9/16
Mill Diameter (Decimal Inch) 0.5625
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0300
Number of Flutes 4
Material Solid Carbide
Finish/Coating TiCN
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Shank Diameter (Inch) 9/16
Overall Length (Inch) 3-1/2
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Straight Shank
Helix Angle 40
Material Grade Micrograin
Single or Double End Single
Length Type Regular
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.003
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List 120

$127.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ProMax - 5/8" Diam, 7/8" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - AlTiN Finish, 3" OAL, 5/8" Shank Diam, Weldon Shank, 40° Helix, Centercutting, Stub Length - USA Tool & Supply

ProMax - 5/8" Diam, 7/8" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - AlTiN Finish, 3" OAL, 5/8" Shank Diam, Weldon Shank, 40° Helix, Centercutting, Stub Length


Item #: 78111549
Brand: ProMax
Model #: 120-04024
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0300
Number of Flutes 4
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (Inch) 7/8
Length of Cut (Decimal Inch) 0.8750
Shank Diameter (Inch) 5/8
Overall Length (Inch) 3
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 40
Material Grade Micrograin
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.003
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List 120

$127.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ProMax - 5/8" Diam, 7/8" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - TiCN Finish, 3" OAL, 5/8" Shank Diam, Weldon Shank, 40° Helix, Centercutting, Stub Length - USA Tool & Supply

ProMax - 5/8" Diam, 7/8" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - TiCN Finish, 3" OAL, 5/8" Shank Diam, Weldon Shank, 40° Helix, Centercutting, Stub Length


Item #: 78111523
Brand: ProMax
Model #: 120-04022
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0300
Number of Flutes 4
Material Solid Carbide
Finish/Coating TiCN
Length of Cut (Inch) 7/8
Length of Cut (Decimal Inch) 0.8750
Shank Diameter (Inch) 5/8
Overall Length (Inch) 3
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 40
Material Grade Micrograin
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.003
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List 120

$127.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 2° Taper Angle per Side, 1/2" Small End Diam, 3-1/4" LOC, High Speed Steel 3 Flute Tapered Square End Mill - 5-1/2" OAL, 5/8" Shank Diam, Spiral Flute - USA Tool & Supply

Made in USA - 2° Taper Angle per Side, 1/2" Small End Diam, 3-1/4" LOC, High Speed Steel 3 Flute Tapered Square End Mill - 5-1/2" OAL, 5/8" Shank Diam, Spiral Flute


Item #: 81441016
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Product Specifications
Material High Speed Steel
End Type Square
Taper Angle Per Side 2.00
Small End Diameter (Inch) 1/2
Small End Diameter (Decimal Inch) 0.5000
Shank Diameter (Inch) 5/8
Length of Cut (Inch) 3-1/4
Length of Cut (Decimal Inch) 3.2500
Number of Flutes 3
Finish/Coating Uncoated
Overall Length (Inch) 5-1/2
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes

$94.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ProMax - 9/16" Diam, 1-1/4" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - AlTiN Finish, 3-1/2" OAL, 9/16" Shank Diam, Straight Shank, 40° Helix, Centercutting, Regular Length - USA Tool & Supply

ProMax - 9/16" Diam, 1-1/4" LOC, 4 Flute Solid Carbide Roughing & Finishing Corner Radius End Mill - AlTiN Finish, 3-1/2" OAL, 9/16" Shank Diam, Straight Shank, 40° Helix, Centercutting, Regular Length


Item #: 76683374
Brand: ProMax
Model #: 120-03614
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 9/16
Mill Diameter (Decimal Inch) 0.5625
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0300
Number of Flutes 4
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Shank Diameter (Inch) 9/16
Overall Length (Inch) 3-1/2
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Straight Shank
Helix Angle 40
Material Grade Micrograin
Single or Double End Single
Length Type Regular
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.003
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List 120

$127.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 9/16", 3" LOC, 9/16" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - USA Tool & Supply

Accupro - 9/16", 3" LOC, 9/16" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill


Item #: 76488766
Brand: Accupro
Model #: 12182257

Product Specifications

Mill Diameter (Inch) 9/16
Mill Diameter (Decimal Inch) 0.5625
Number of Flutes 3
Length of Cut (Inch) 3
Length of Cut (Decimal Inch) 3.0000
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 9/16
Single or Double End Single
Overall Length (Inch) 6
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40.00
Variable Helix No
Variable Index No
Flute Type Spiral
Length Type Extra Long
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$121.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 12mm, 50mm LOC, 12mm Shank Diam, 100mm OAL, 5 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 55ML - USA Tool & Supply

SGS - 12mm, 50mm LOC, 12mm Shank Diam, 100mm OAL, 5 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 55ML


Item #: 75344127
Brand: SGS
Model #: 42617
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 12.00
Mill Diameter (Decimal Inch) 0.4724
Number of Flutes 5
Length of Cut (mm) 50.00
Length of Cut (Decimal Inch) 1.9685
Material Solid Carbide
Finish/Coating AlTiN
Shank Diameter (mm) 12.00
Single or Double End Single
Overall Length (mm) 100.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Length Type Long
Mill Diameter Tolerance (mm) +0.000/-0.050
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (mm) +0.000/-0.011
Series/List 55ML

$135.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 3/4", 2-1/4" LOC, 3/4" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut - USA Tool & Supply

Hertel - 3/4", 2-1/4" LOC, 3/4" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut


Item #: 88248034
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 2
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Chipbreaker No

$149.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1/2" Diam, 1" LOC, 2 Flute Solid Carbide Ball End Mill - TiAlN Finish, Single End, 3" OAL, 1/2" Shank Diam, Spiral Flute - USA Tool & Supply

OSG - 1/2" Diam, 1" LOC, 2 Flute Solid Carbide Ball End Mill - TiAlN Finish, Single End, 3" OAL, 1/2" Shank Diam, Spiral Flute


Item #: 44856813
Brand: OSG
Model #: HP421-5000-BN
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Overall Length (Inch) 3
Shank Diameter (Inch) 1/2
Finish/Coating TiAlN
Single or Double End Single
Helix Angle 35.00
Extended Reach No
Material Grade Micrograin
Mill Diameter Tolerance (Decimal Inch) +0.0000/-0.0015
Flute Type Spiral
Undercutting No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List HP421BN
Cutting Direction Right Hand
Flute Direction Right Hand

$117.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wika - 4" Dial, 1/4 Thread, 30-0-30 Scale Range, Pressure Gauge - Lower Connection Mount, Accurate to 1% of Scale - USA Tool & Supply

Wika - 4" Dial, 1/4 Thread, 30-0-30 Scale Range, Pressure Gauge - Lower Connection Mount, Accurate to 1% of Scale


Item #: 56453921
Brand: Wika
Model #: 9699045
Exact Tooling IR#: 04

Features and Benefits

Analog dials resemble a clock face, with a needle to indicate the pressure.
Product Specifications
Type Liquid-Filled
Scale Measurement Ranges 30-0-30
Dial Diameter (Inch) 4
Connection / Mount Lower
Accuracy (%) 1.00
Case Material Stainless Steel
Dial Type Analog
Thread Size (Inch) 1/4
Liquid Filled Yes
Material Grade 18-8
Minimum PSI -30
Maximum PSI 30

$146.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wika - 4" Dial, 1/4 Thread, 30-0-160 Scale Range, Pressure Gauge - Lower Connection Mount, Accurate to 1% of Scale - USA Tool & Supply

Wika - 4" Dial, 1/4 Thread, 30-0-160 Scale Range, Pressure Gauge - Lower Connection Mount, Accurate to 1% of Scale


Item #: 56453954
Brand: Wika
Model #: 9699079
Exact Tooling IR#: 04

Features and Benefits

Analog dials resemble a clock face, with a needle to indicate the pressure.
Product Specifications
Type Liquid-Filled
Scale Measurement Ranges 30-0-160
Dial Diameter (Inch) 4
Connection / Mount Lower
Accuracy (%) 1.00
Case Material Stainless Steel
Dial Type Analog
Thread Size (Inch) 1/4
Liquid Filled Yes
Material Grade 18-8
Minimum PSI -30
Maximum PSI 160

$128.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wika - 2-1/2" Dial, 1/4 Thread, 0-100 Scale Range, Pressure Gauge - Center Back Connection Mount, Accurate to 1.5% of Scale - USA Tool & Supply

Wika - 2-1/2" Dial, 1/4 Thread, 0-100 Scale Range, Pressure Gauge - Center Back Connection Mount, Accurate to 1.5% of Scale


Item #: 56454770
Brand: Wika
Model #: 9833247
Exact Tooling IR#: 04

Features and Benefits

Analog dials resemble a clock face, with a needle to indicate the pressure.
Product Specifications
Type Liquid-Filled
Scale Measurement Ranges 0-100
Dial Diameter (Inch) 2-1/2
Connection / Mount Center Back
Accuracy (%) 1.50
Case Material Stainless Steel
Dial Type Analog
Thread Size (Inch) 1/4
Liquid Filled Yes
Material Grade 316
Maximum PSI 100

$160.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

King - 1/4" F Port Block Style, Panel Mount Flowmeter - 125 Max psi, 20 SCFH, Acrylic - USA Tool & Supply

King - 1/4" F Port Block Style, Panel Mount Flowmeter - 125 Max psi, 20 SCFH, Acrylic


Item #: 86485778
Brand: King
Model #: 75301112C-07
Exact Tooling IR#: 04

Product Specifications
Type Acrylic, Block Style, Panel Mount Flowmeter
Port Thread Style F
Port Size (Inch) 1/4
Material Acrylic
Maximum Working Pressure 125
Air Flow Rate 20 SCFH

$81.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It