Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

Accurate Bushing - 1-1/2" Roller Diam x 7/8" Width, Sealed Yoke Cam Follower - Stainless Steel, 0.94" OAL, 3,390 Lb Dynamic Cap - USA Tool & Supply

Accurate Bushing - 1-1/2" Roller Diam x 7/8" Width, Sealed Yoke Cam Follower - Stainless Steel, 0.94" OAL, 3,390 Lb Dynamic Cap


Item #: 62894894
Brand: Accurate Bushing
Model #: YR-1-1/2-X-SS
Exact Tooling IR#: 04

Product Specifications
Type Sealed Yoke Cam Follower
Roller Diameter (Decimal Inch) 1.5000
Roller Diameter (Inch) 1-1/2
Roller Width (Decimal Inch) 0.8750
Dynamic Load Capacity (Lb.) 3390
Static Load Capacity (Pounds) 0.00
Length (Decimal Inch) 0.940
Material Stainless Steel

$213.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Tritan - 90mm Bore Diam, 140mm OD, Double Shield Deep Groove Radial Ball Bearing - 24mm Wide, 1 Row, Round Bore, 11,200 Lb Static Capacity, 13,100 Lb Dynamic Capacity - USA Tool & Supply

Tritan - 90mm Bore Diam, 140mm OD, Double Shield Deep Groove Radial Ball Bearing - 24mm Wide, 1 Row, Round Bore, 11,200 Lb Static Capacity, 13,100 Lb Dynamic Capacity


Item #: 35433903
Brand: Tritan
Model #: 6018 ZZC3 PRX
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Shield
Bore Diameter (mm) 90.00
Outside Diameter (mm) 140.00
Width (mm) 24.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 11200
Static Load Capacity (Nm) 49820
Dynamic Load Capacity (Lb.) 13100
Dynamic Load Capacity (Nm) 58272
Bearing Number 6018

$142.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Continental ContiTech - Section L, 3/4" Wide, Timing Belt - Helanca Weave Stretch Nylon, L Series Belts Positive Drive, No. 817L - USA Tool & Supply

Continental ContiTech - Section L, 3/4" Wide, Timing Belt - Helanca Weave Stretch Nylon, L Series Belts Positive Drive, No. 817L


Item #: 35370253
Brand: Continental ContiTech
Model #: 20083540
Exact Tooling IR#: 04

Product Specifications
Belt Style Timing Belts
Belt Section L
Belt Width (Inch) 3/4
Belt Number 817L
Belt Internal Length (Decimal Inch) 81.70
Number of Teeth 218
Belt Pitch 3/8
Material Helanca Weave Stretch Nylon
Style L Series Belts Positive Drive

$79.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - #1208 Standard Woodruff Key - 1" Long x 3/8" Wide, Alloy Steel - USA Tool & Supply

Made in USA - #1208 Standard Woodruff Key - 1" Long x 3/8" Wide, Alloy Steel


Item #: 67990168
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Type Woodruff
USA Standard #1208
Length (Inch) 1
Width (Inch) 3/8

$179.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Continental ContiTech - 25 Tooth, 53" Inside x 62.06" Outside Diam, Synchronous Belt Drive Sprocket Timing Belt Pulley - 0.472" Belt Width, 8" Pitch Diam, Cast Iron, 1108TL Bushing - USA Tool & Supply

Continental ContiTech - 25 Tooth, 53" Inside x 62.06" Outside Diam, Synchronous Belt Drive Sprocket Timing Belt Pulley - 0.472" Belt Width, 8" Pitch Diam, Cast Iron, 1108TL Bushing


Item #: 54287214
Brand: Continental ContiTech
Model #: 20296044
Exact Tooling IR#: 04

Product Specifications
Pulley Type Synchronous Belt Drive Sprocket
Number of Teeth 25
Inside Diameter (mm) 53.0000
Outside Diameter (mm) 62.0600
Belt Width (Decimal Inch) 0.472
Belt Width (mm) 12.00
Pitch Diameter (mm) 8.000
Bushing Type 1108TL
Material Cast Iron
Flange Diameter (Decimal Inch) 2.6378

$132.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 5/8", 1-1/8" LOC, 5/8" Shank Diam, 5" OAL, 2 Flute, High Speed Steel Square End Mill - Double End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HD-2 - USA Tool & Supply

Cleveland - 5/8", 1-1/8" LOC, 5/8" Shank Diam, 5" OAL, 2 Flute, High Speed Steel Square End Mill - Double End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HD-2


Item #: 87391298
Brand: Cleveland
Model #: C33717
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
Number of Flutes 2
Length of Cut (Inch) 1-1/8
Length of Cut (Decimal Inch) 1.1250
Material High Speed Steel
Finish/Coating TiCN
Shank Diameter (Inch) 5/8
Single or Double End Double
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List HD-2

$98.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087 - USA Tool & Supply

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087


Item #: 58537960
Brand: Guhring
Model #: 9030870127060
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3087

$120.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089 - USA Tool & Supply

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089


Item #: 58540246
Brand: Guhring
Model #: 9030890127060
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3089

$120.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 8mm, 32mm LOC, 8mm Shank Diam, 79mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 25° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - USA Tool & Supply

Sandvik Coromant - 8mm, 32mm LOC, 8mm Shank Diam, 79mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 25° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 49391501
Brand: Sandvik Coromant
Model #: 6260043
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (mm) 8.00
Mill Diameter (Decimal Inch) 0.3150
Number of Flutes 2
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2598
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 8.00
Single or Double End Single
Overall Length (mm) 79.00
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 25
Flute Type Spiral
Helix Style Medium
Manufacturer Grade H10F
Maximum Helix Angle 25
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) h6
Series/List CoroMill Plura

$139.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087 - USA Tool & Supply

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087


Item #: 58540188
Brand: Guhring
Model #: 9030870127020
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3087

$120.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 1/4" Diam, 1/2" LOC, 6 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 2" OAL, 1/4" Shank Diam, Cylindrical Shank, 50° Helix, Stub Length - USA Tool & Supply

Emuge - 1/4" Diam, 1/2" LOC, 6 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 2" OAL, 1/4" Shank Diam, Cylindrical Shank, 50° Helix, Stub Length


Item #: 47951835
Brand: Emuge
Model #: 2813A.0250
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/4
End Type Square
Corner Radius (Decimal Inch) 0.0250
Number of Flutes 6
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (Inch) 1/2
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2
Centercutting Non-Center Cutting
Extended Reach ExtendedReach
Shank Type Cylindrical
Helix Angle 50
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) -0.0016
Series/List 2813A

$110.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 16mm, 32mm LOC, 16mm Shank Diam, 89mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 16mm, 32mm LOC, 16mm Shank Diam, 89mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 01216506
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 16.00
Mill Diameter (Decimal Inch) 0.6299
Number of Flutes 2
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2598
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 16.00
Single or Double End Single
Overall Length (mm) 89.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$117.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087 - USA Tool & Supply

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3087


Item #: 58537978
Brand: Guhring
Model #: 9030870127040
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3087

$120.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089 - USA Tool & Supply

Guhring - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089


Item #: 58537796
Brand: Guhring
Model #: 9030890127040
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3089

$120.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 12mm Diam, 16mm LOC, 3 Flute Powdered Metal Keyway End Mill - Spiral Flute, AlCrN Finish, 12mm Shank Diam, 73mm OAL, 30° Helix, Centercutting - USA Tool & Supply

DORMER - 12mm Diam, 16mm LOC, 3 Flute Powdered Metal Keyway End Mill - Spiral Flute, AlCrN Finish, 12mm Shank Diam, 73mm OAL, 30° Helix, Centercutting


Item #: 65635294
Brand: DORMER
Model #: 0573105
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Aluminum chromium nitride (AlCrN) has a higher heat resistance than AlTiN. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 12.00
Number of Flutes 3
Material Powdered Metal
Length of Cut (mm) 16.00
Finish/Coating AlCrN
Overall Length (mm) 73.00
Shank Diameter (mm) 12
Flute Type Spiral
Helix Angle 30
Centercutting Center Cutting
Series/List C353

$91.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 11mm Diam, 13mm LOC, 3 Flute Powdered Metal Keyway End Mill - Spiral Flute, AlCrN Finish, 12mm Shank Diam, 70mm OAL, 40° Helix, Centercutting - USA Tool & Supply

DORMER - 11mm Diam, 13mm LOC, 3 Flute Powdered Metal Keyway End Mill - Spiral Flute, AlCrN Finish, 12mm Shank Diam, 70mm OAL, 40° Helix, Centercutting


Item #: 65634693
Brand: DORMER
Model #: 0355275
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Aluminum chromium nitride (AlCrN) has a higher heat resistance than AlTiN. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 11.00
Number of Flutes 3
Material Powdered Metal
Length of Cut (mm) 13.00
Finish/Coating AlCrN
Overall Length (mm) 70.00
Shank Diameter (mm) 12
Flute Type Spiral
Helix Angle 40
Centercutting Center Cutting
Series/List C367

$94.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 11mm Diam, 22mm LOC, 2 Flute Powdered Metal Keyway End Mill - Spiral Flute, TiCN Finish, 12mm Shank Diam, 79mm OAL, 30° Helix, Centercutting - USA Tool & Supply

DORMER - 11mm Diam, 22mm LOC, 2 Flute Powdered Metal Keyway End Mill - Spiral Flute, TiCN Finish, 12mm Shank Diam, 79mm OAL, 30° Helix, Centercutting


Item #: 65637993
Brand: DORMER
Model #: 0354230
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 11.00
Number of Flutes 2
Material Powdered Metal
Length of Cut (mm) 22.00
Finish/Coating TiCN
Overall Length (mm) 79.00
Shank Diameter (mm) 12
Flute Type Spiral
Helix Angle 30
Centercutting Center Cutting
Series/List C139

$94.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1/2", 5 Flute, Solid Carbide, 0.03" Corner Radius End Mill - 3" OAL, 1" LOC - USA Tool & Supply

OSG - 1/2", 5 Flute, Solid Carbide, 0.03" Corner Radius End Mill - 3" OAL, 1" LOC


Item #: 87593018
Brand: OSG
Model #: 20555002
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and commonly used for high speed applications on stainless steels, nickel and titanium alloys.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0300
Number of Flutes 5
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Flute Type Spiral
Helix Angle Variable
Material Grade Ultra Fine Micrograin
Extended Reach No
Series/List 2055

$110.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 8mm Diam 4 Flute Solid Carbide 1mm Corner Radius End Mill - USA Tool & Supply

OSG - 8mm Diam 4 Flute Solid Carbide 1mm Corner Radius End Mill


Item #: 44867281
Brand: OSG
Model #: 457108311

Product Specifications

Mill Diameter (mm) 8.00
Mill Diameter (Decimal Inch) 0.3150
End Type Corner Radius
Corner Radius (mm) 1.000
Corner Radius (Decimal Inch) 0.0394
Number of Flutes 4
Material Solid Carbide
Finish/Coating WXS
Length of Cut (mm) 12.00
Length of Cut (Decimal Inch) 0.4724
Shank Diameter (mm) 8.00
Overall Length (mm) 110.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 45.00
Variable Index No
Variable Helix No
Reach Length (mm) 40.00
Material Grade Micrograin
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) 0.0000/-0.0008
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Extended Reach Yes
Series/List 4571

$127.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/8", 4 Flute, Single End, Solid Carbide, 1/8" Corner Radius End Mill - 6" OAL, 40° Helix, Right Hand Flute, 1-1/2" LOC, Right Hand Cut - USA Tool & Supply

Accupro - 3/8", 4 Flute, Single End, Solid Carbide, 1/8" Corner Radius End Mill - 6" OAL, 40° Helix, Right Hand Flute, 1-1/2" LOC, Right Hand Cut


Item #: 08487555
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
End Type Corner Radius
Corner Radius (Inch) 1/8
Corner Radius (Decimal Inch) 0.1250
Number of Flutes 4
Material Solid Carbide
Finish/Coating TiCN
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Shank Diameter (Inch) 3/8
Overall Length (Inch) 6
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 40.00
Material Grade Micrograin
Single or Double End Single
Length Type Extra Long
Centercutting Yes
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.0025
Corner Radius Tolerance (Decimal Inch) +/-0.0015
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Extended Reach No

$93.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It