Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

Hertel - 7/8" Diam, Coarse Pitch, 1-7/8" LOC, 5 Flute Cobalt Roughing Square End Mill - TiN Finish, 4-1/8" OAL, 3/4" Shank Diam, Single End, 30° Helix - USA Tool & Supply

Hertel - 7/8" Diam, Coarse Pitch, 1-7/8" LOC, 5 Flute Cobalt Roughing Square End Mill - TiN Finish, 4-1/8" OAL, 3/4" Shank Diam, Single End, 30° Helix


Item #: 06822035
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 5
Pitch Coarse
Length of Cut (Inch) 1-7/8
Length of Cut (Decimal Inch) 1.8750
Shank Diameter (Inch) 3/4
End Type Square End
Material Cobalt
Finish/Coating TiN
Overall Length (Inch) 4-1/8
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular

$74.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 29/32", 1-7/8" LOC, 3/4" Shank Diam, 4-1/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 540 - USA Tool & Supply

OSG - 29/32", 1-7/8" LOC, 3/4" Shank Diam, 4-1/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 540


Item #: 75026237
Brand: OSG
Model #: 5403400
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 29/32
Mill Diameter (Decimal Inch) 0.9063
Number of Flutes 4
Length of Cut (Inch) 1-7/8
Length of Cut (Decimal Inch) 1.8750
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 4-1/8
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List 540

$95.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1/2", 1-1/4" LOC, 1/2" Shank Diam, 3" OAL, 5 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 455C - USA Tool & Supply

OSG - 1/2", 1-1/4" LOC, 1/2" Shank Diam, 3" OAL, 5 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 455C


Item #: 44837581
Brand: OSG
Model #: 455-500208
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 5
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Series/List 455C

$81.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 31/32", 1-7/8" LOC, 3/4" Shank Diam, 4-1/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 540 - USA Tool & Supply

OSG - 31/32", 1-7/8" LOC, 3/4" Shank Diam, 4-1/8" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 540


Item #: 75026245
Brand: OSG
Model #: 5403500
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 31/32
Mill Diameter (Decimal Inch) 0.9688
Number of Flutes 4
Length of Cut (Inch) 1-7/8
Length of Cut (Decimal Inch) 1.8750
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 4-1/8
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List 540

$95.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Iscar - 3/8", 3 Flute, Single End, Solid Carbide, 0.06" Corner Radius End Mill - 3" OAL, Right Hand Flute, 0.6" LOC, Right Hand Cut, 1-7/8" Extended Reach - USA Tool & Supply

Iscar - 3/8", 3 Flute, Single End, Solid Carbide, 0.06" Corner Radius End Mill - 3" OAL, Right Hand Flute, 0.6" LOC, Right Hand Cut, 1-7/8" Extended Reach


Item #: 91100263
Brand: Iscar
Model #: 5622937
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0600
Number of Flutes 3
Material Solid Carbide
Finish/Coating Uncoated
Length of Cut (Decimal Inch) 0.6000
Shank Diameter (Inch) 3/8
Overall Length (Inch) 3
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle Variable
Reach Length (Decimal Inch) 1.8750
Material Grade Fine Grain
Single or Double End Single
Minimum Helix Angle 39
Maximum Helix Angle 41
Centercutting No
Flute Direction Right Hand
Extended Reach Yes

$139.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Harvey Tool - Corner Rounding End Mills; Material: Solid Carbide ; Single or Double End: Double ; Radius (mm): 3.00 ; Radius (Decimal Inch): 0.1180 ; Mill Diameter (Inch): 1/2 ; Mill Diameter (Decimal Inch): 0.5000 - Exact Industrial Supply

Harvey Tool - Corner Rounding End Mills; Material: Solid Carbide ; Single or Double End: Double ; Radius (mm): 3.00 ; Radius (Decimal Inch): 0.1180 ; Mill Diameter (Inch): 1/2 ; Mill Diameter (Decimal Inch): 0.5000


Item #: 85376002
Brand: Harvey Tool
Model #: 44118

Product Specifications

Corner Rounding End Mills; Material: Solid Carbide ; Single or Double End: Double ; Radius (mm): 3.00 ; Radius (Decimal Inch): 0.1180 ; Mill Diameter (Inch): 1/2 ; Mill Diameter (Decimal Inch): 0.5000
Material Solid Carbide
Single or Double End Double
Radius (mm) 3.00
Radius (Decimal Inch) 0.1180
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Finish/Coating Uncoated
Shank Diameter (Inch) 1/2
Tip Diameter (Inch) 1/4
Tip Diameter (Decimal Inch) 0.2500
Overall Length (Inch) 3
Series/List Corner Rounding End Mills - 2 & 4 Flute - Unflared

$110.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Harvey Tool - 3/32" Radius, 1/2" Diam, 4 Flute Solid Carbide Corner Rounding End Mill - Exact Industrial Supply

Harvey Tool - 3/32" Radius, 1/2" Diam, 4 Flute Solid Carbide Corner Rounding End Mill


Item #: 76048560
Brand: Harvey Tool
Model #: 44093

Product Specifications

Material Solid Carbide
Single or Double End Double
Radius (Inch) 3/32
Radius (Decimal Inch) 0.0930
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Finish/Coating Uncoated
Shank Diameter (Inch) 1/2
Tip Diameter (Inch) 1/4
Tip Diameter (Decimal Inch) 0.2500
Overall Length (Inch) 3
Series/List Corner Rounding End Mills - 2 & 4 Flute - Unflared

$110.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 1/4" Radius, 1" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, TiN Finish, 3-1/4" OAL, 3/4" Shank Diam - USA Tool & Supply

Interstate - 1/4" Radius, 1" Mill Diam, 4 Flute High Speed Steel Corner Rounding End Mill - Single End, TiN Finish, 3-1/4" OAL, 3/4" Shank Diam


Item #: 05208541
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Material High Speed Steel
Single or Double End Single
Radius (Inch) 1/4
Radius (Decimal Inch) 0.2500
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Finish/Coating TiN
Shank Diameter (Inch) 3/4
Overall Length (Inch) 3-1/4
Cutting Direction Right Hand
Flute Direction Right Hand

$82.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Melin Tool - 5/16" Radius, 1" Mill Diam, 3 Flute Cobalt Corner Rounding End Mill - Single End, Uncoated, 3/8" Tip Diam, 3-1/4" OAL, 1" Shank Diam - USA Tool & Supply

Melin Tool - 5/16" Radius, 1" Mill Diam, 3 Flute Cobalt Corner Rounding End Mill - Single End, Uncoated, 3/8" Tip Diam, 3-1/4" OAL, 1" Shank Diam


Item #: 57828436
Brand: Melin Tool
Model #: 12736
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Material Cobalt
Single or Double End Single
Radius (Inch) 5/16
Radius (Decimal Inch) 0.3125
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Tip Diameter (Inch) 3/8
Tip Diameter (Decimal Inch) 0.3750
Overall Length (Inch) 3-1/4
Cutting Direction Right Hand
Material Grade M42
Helix Angle 0
Radius Tolerance (Decimal Inch) +0.001/-0.001

$122.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 12mm, 22mm LOC, 12mm Shank Diam, 83mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Right Hand Cut, Right Hand Flute, Series 3059 - USA Tool & Supply

Guhring - 12mm, 22mm LOC, 12mm Shank Diam, 83mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Right Hand Cut, Right Hand Flute, Series 3059


Item #: 58538141
Brand: Guhring
Model #: 9030590120000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (mm) 12.00
Mill Diameter (Decimal Inch) 0.4724
Number of Flutes 2
Length of Cut (mm) 22.00
Length of Cut (Decimal Inch) 0.8661
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 12.00
Single or Double End Single
Overall Length (mm) 83.00
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3059

$111.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 7/16", 1" LOC, 1/2" Shank Diam, 2-11/16" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiCN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4 - USA Tool & Supply

Cleveland - 7/16", 1" LOC, 1/2" Shank Diam, 2-11/16" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiCN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4


Item #: 87434155
Brand: Cleveland
Model #: C31997
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 11.11
Mill Diameter (Inch) 7/16
Mill Diameter (Decimal Inch) 0.4375
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Powdered Metal
Finish/Coating TiCN
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 2-11/16
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List PM-4

$81.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 5/16", 2 Flute, Single End, Solid Carbide, 0.012" Corner Radius End Mill - 2-1/2" OAL, 45° Helix, Right Hand Flute, 7/16" LOC, Right Hand Cut, 1-1/8" Extended Reach - USA Tool & Supply

SGS - 5/16", 2 Flute, Single End, Solid Carbide, 0.012" Corner Radius End Mill - 2-1/2" OAL, 45° Helix, Right Hand Flute, 7/16" LOC, Right Hand Cut, 1-1/8" Extended Reach


Item #: 59001131
Brand: SGS
Model #: 91236
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium diboride (TiB2) is a corrosion resistant ceramic compound made of titanium and boron. It is commonly used on nonferrous materials including aluminum and magnesium alloys.
Product Specifications
Mill Diameter (Inch) 5/16
Mill Diameter (Decimal Inch) 0.3125
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0120
Number of Flutes 2
Material Solid Carbide
Finish/Coating TiB2
Length of Cut (Inch) 7/16
Length of Cut (Decimal Inch) 0.4375
Shank Diameter (Inch) 3/8
Overall Length (Inch) 2-1/2
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 45.00
Reach Length (Inch) 1-1/8
Reach Length (Decimal Inch) 1.1250
Material Grade Micrograin
Single or Double End Single
Length Type Regular
Centercutting Yes
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.00000/-0.00035
Corner Radius Tolerance (Decimal Inch) +0.000/-0.002
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00035
Extended Reach Yes

$116.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 10mm, 4 Flute, Solid Carbide, 1mm Corner Radius End Mill - 70mm OAL, 25mm LOC - USA Tool & Supply

M.A. Ford - 10mm, 4 Flute, Solid Carbide, 1mm Corner Radius End Mill - 70mm OAL, 25mm LOC


Item #: 58207762
Brand: M.A. Ford
Model #: 11139373A
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
ALtima is a stronger designed AlTiN coating. is commonly used on hardened steels, stainless steel, titanium alloy and other difficult-to-machine materials. ALtima is a proprietary coating exclusive to M.A. Ford Mfg. Co., Inc.
Product Specifications
Mill Diameter (mm) 10.00
Mill Diameter (Decimal Inch) 0.3937
End Type Corner Radius
Corner Radius (mm) 1.000
Corner Radius (Decimal Inch) 0.0394
Number of Flutes 4
Material Solid Carbide
Finish/Coating ALtima
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 10.00
Overall Length (mm) 70.00
Additional Information Modified Standard, Non-Returnable & Non-Cancelable

$86.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 10mm, 4 Flute, Solid Carbide, 0.75mm Corner Radius End Mill - 70mm OAL, 25mm LOC - USA Tool & Supply

M.A. Ford - 10mm, 4 Flute, Solid Carbide, 0.75mm Corner Radius End Mill - 70mm OAL, 25mm LOC


Item #: 58202680
Brand: M.A. Ford
Model #: 11139372A
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
ALtima is a stronger designed AlTiN coating. is commonly used on hardened steels, stainless steel, titanium alloy and other difficult-to-machine materials. ALtima is a proprietary coating exclusive to M.A. Ford Mfg. Co., Inc.
Product Specifications
Mill Diameter (mm) 10.00
Mill Diameter (Decimal Inch) 0.3937
End Type Corner Radius
Corner Radius (mm) 0.750
Corner Radius (Decimal Inch) 0.0295
Number of Flutes 4
Material Solid Carbide
Finish/Coating ALtima
Length of Cut (mm) 25.00
Length of Cut (Decimal Inch) 0.9843
Shank Diameter (mm) 10.00
Overall Length (mm) 70.00
Additional Information Modified Standard, Non-Returnable & Non-Cancelable

$86.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1" Diam, Coarse Pitch, 2" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, 30° Helix - USA Tool & Supply

Hertel - 1" Diam, Coarse Pitch, 2" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, 30° Helix


Item #: 06821722
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 5
Pitch Coarse
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Shank Diameter (Inch) 1
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 4-1/2
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular

$94.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1" Diam, Fine Pitch, 2" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, 30° Helix - USA Tool & Supply

Hertel - 1" Diam, Fine Pitch, 2" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, 30° Helix


Item #: 06822365
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 5
Pitch Fine
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Shank Diameter (Inch) 1
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 4-1/2
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular

$94.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 7/8" Diam, Fine Pitch, 7/8" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 3-1/8" OAL, 7/8" Shank Diam, Single End, Centercutting, 30° Helix - USA Tool & Supply

Hertel - 7/8" Diam, Fine Pitch, 7/8" LOC, 5 Flute Cobalt Roughing Square End Mill - Uncoated, 3-1/8" OAL, 7/8" Shank Diam, Single End, Centercutting, 30° Helix


Item #: 84512086
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 5
Pitch Fine
Length of Cut (Inch) 7/8
Length of Cut (Decimal Inch) 0.8750
Shank Diameter (Inch) 7/8
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 3-1/8
Centercutting Center Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand

$86.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1/2" Diam, Fine Pitch, 1-1/4" LOC, 4 Flute Cobalt Roughing Square End Mill - TiCN Finish, 3-1/4" OAL, 1/2" Shank Diam, Single End, 30° Helix - USA Tool & Supply

OSG - 1/2" Diam, Fine Pitch, 1-1/4" LOC, 4 Flute Cobalt Roughing Square End Mill - TiCN Finish, 3-1/4" OAL, 1/2" Shank Diam, Single End, 30° Helix


Item #: 09636614
Brand: OSG
Model #: 4550108
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Pitch Fine
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Shank Diameter (Inch) 1/2
End Type Square End
Material Cobalt
Finish/Coating TiCN
Overall Length (Inch) 3-1/4
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular
Series/List 455

$105.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1" Diam, Coarse Pitch, 2" LOC, 3 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 37° Helix - USA Tool & Supply

Hertel - 1" Diam, Coarse Pitch, 2" LOC, 3 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 37° Helix


Item #: 91192278
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Pitch Coarse
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Shank Diameter (Inch) 1
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 4-1/2
Centercutting Center Cutting
Helix Angle 37.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand

$86.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 3° Taper Angle per Side, 1/8" Small End Diam, 3" LOC, High Speed Steel 3 Flute Tapered Square End Mill - 5" OAL, 1/2" Shank Diam, Spiral Flute - USA Tool & Supply

Made in USA - 3° Taper Angle per Side, 1/8" Small End Diam, 3" LOC, High Speed Steel 3 Flute Tapered Square End Mill - 5" OAL, 1/2" Shank Diam, Spiral Flute


Item #: 04152708
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

High Speed Steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Product Specifications
Material High Speed Steel
End Type Square
Taper Angle Per Side 3.00
Small End Diameter (Inch) 1/8
Small End Diameter (Decimal Inch) 0.1250
Shank Diameter (Inch) 1/2
Length of Cut (Inch) 3
Length of Cut (Decimal Inch) 3.0000
Number of Flutes 3
Finish/Coating Uncoated
Overall Length (Inch) 5
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes

$106.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It