Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

Interstate - 5/8", 1-3/8" LOC, 5/8" Shank Diam, 5" OAL, 4 Flute, High Speed Steel Square End Mill - Double End, TiN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Interstate - 5/8", 1-3/8" LOC, 5/8" Shank Diam, 5" OAL, 4 Flute, High Speed Steel Square End Mill - Double End, TiN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute


Item #: 01724400
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
Number of Flutes 4
Length of Cut (Inch) 1-3/8
Length of Cut (Decimal Inch) 1.3750
Material High Speed Steel
Finish/Coating TiN
Shank Diameter (Inch) 5/8
Single or Double End Double
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Chipbreaker No
Extended Reach No

$31.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 7° Taper Angle per Side, 1/8" Small End Diam, 1" LOC, Solid Carbide 3 Flute Tapered Square End Mill - AlTiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix - USA Tool & Supply

SGS - 7° Taper Angle per Side, 1/8" Small End Diam, 1" LOC, Solid Carbide 3 Flute Tapered Square End Mill - AlTiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix


Item #: 58989856
Brand: SGS
Model #: 32357
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Square
Taper Angle Per Side 7.00
Small End Diameter (Inch) 1/8
Small End Diameter (Decimal Inch) 0.1250
Shank Diameter (Inch) 3/8
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Number of Flutes 3
Helix Angle 28
Finish/Coating AlTiN
Overall Length (Inch) 3-1/2
Material Grade Micrograin
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00035
Small End Diameter Tolerance (Decimal Inch) +0.001/-0.002

$83.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 5/16", 1-5/8" LOC, 5/16" Shank Diam, 4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3155 - USA Tool & Supply

Guhring - 5/16", 1-5/8" LOC, 5/16" Shank Diam, 4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3155


Item #: 41831330
Brand: Guhring
Model #: 9031550079400
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 5/16
Mill Diameter (Decimal Inch) 0.3125
Number of Flutes 4
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 5/16
Single or Double End Single
Overall Length (Inch) 4
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Extra Long
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3155

$61.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - Uncoated, Weldon Shank, 30° Helix, Centercutting, Extra Long Length - USA Tool & Supply

DORMER - 4 Flute Powdered Metal Roughing & Finishing Square End Mill - Uncoated, Weldon Shank, 30° Helix, Centercutting, Extra Long Length


Item #: 65636185
Brand: DORMER
Model #: 0355107
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 6.00
Mill Diameter (Decimal Inch) 0.2364
End Type Square
Number of Flutes 4
Material Powdered Metal
Finish/Coating Uncoated
Length of Cut (mm) 24
Length of Cut (Decimal Inch) 0.9456
Shank Diameter (mm) 6
Overall Length (mm) 68
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 30
Single or Double End Single
Length Type Extra Long
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) +0.048/0.000
Series/List C273

$48.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/8", 1" LOC, 3/8" Shank Diam, 2-3/4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 3/8", 1" LOC, 3/8" Shank Diam, 2-3/4" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 87635850
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-3/4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Material Grade Ultra Micrograin
Chipbreaker No
Extended Reach No

$56.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 5/16", 3/4" LOC, 3/8" Shank Diam, 2-1/2" OAL, 4 Flute, Powdered Metal Square End Mill - USA Tool & Supply

Cleveland - 5/16", 3/4" LOC, 3/8" Shank Diam, 2-1/2" OAL, 4 Flute, Powdered Metal Square End Mill


Item #: 87434718
Brand: Cleveland
Model #: C31966

Product Specifications

Mill Diameter (mm) 7.94
Mill Diameter (Inch) 5/16
Mill Diameter (Decimal Inch) 0.3125
Number of Flutes 4
Length of Cut (Inch) 3/4
Length of Cut (Decimal Inch) 0.7500
Material Powdered Metal
Finish/Coating TiN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Variable Helix No
Variable Index No
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List PM-4

$44.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 3/8", 3/4" LOC, 3/8" Shank Diam, 2-1/2" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4 - USA Tool & Supply

Cleveland - 3/8", 3/4" LOC, 3/8" Shank Diam, 2-1/2" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4


Item #: 87434775
Brand: Cleveland
Model #: C31968
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 9.53
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
Number of Flutes 4
Length of Cut (Inch) 3/4
Length of Cut (Decimal Inch) 0.7500
Material Powdered Metal
Finish/Coating TiN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List PM-4

$44.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 21/64", 13/16" LOC, 3/8" Shank Diam, 2-1/2" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series NR-204 - USA Tool & Supply

RobbJack - 21/64", 13/16" LOC, 3/8" Shank Diam, 2-1/2" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series NR-204


Item #: 00491365
Brand: RobbJack
Model #: NR-204-10.5
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 21/64
Mill Diameter (Decimal Inch) 0.3281
Number of Flutes 2
Length of Cut (Inch) 13/16
Length of Cut (Decimal Inch) 0.8125
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.001/-0.000
Material Grade C2
Chipbreaker No
Extended Reach No
Overall Length Tolerance (Decimal Inch) +0.060/-0.060
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0002
Series/List NR-204

$57.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sumitomo - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Sumitomo - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 59694539
Brand: Sumitomo
Model #: U100288
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating TiN
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0/-0.00043
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.0000/-0.0030

$74.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/8", 1" LOC, 3/8" Shank Diam, 2-3/4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Accupro - 3/8", 1" LOC, 3/8" Shank Diam, 2-3/4" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 87636163
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-3/4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Material Grade Ultra Micrograin
Chipbreaker No
Extended Reach No

$56.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1/2" Diam, Coarse Pitch, 1-5/8" LOC, 4 Flute Cobalt Roughing Square End Mill - TiCN Finish, 3-5/8" OAL, 1/2" Shank Diam, Single End, 30° Helix - USA Tool & Supply

Hertel - 1/2" Diam, Coarse Pitch, 1-5/8" LOC, 4 Flute Cobalt Roughing Square End Mill - TiCN Finish, 3-5/8" OAL, 1/2" Shank Diam, Single End, 30° Helix


Item #: 44838969
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Pitch Coarse
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Shank Diameter (Inch) 1/2
End Type Square End
Material Cobalt
Finish/Coating TiCN
Overall Length (Inch) 3-5/8
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.00394/-0.00197
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0005
Overall Length (Decimal Inch) 3.6250

$50.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 6mm, 13mm LOC, 6mm Shank Diam, 57mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Nano-A Finish, Spiral Flute, 36/38° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 6707 - USA Tool & Supply

Guhring - 6mm, 13mm LOC, 6mm Shank Diam, 57mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Nano-A Finish, Spiral Flute, 36/38° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 6707


Item #: 53724936
Brand: Guhring
Model #: 9067070060000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Nano-A is a multi-layer coating that combines TiAlN and AlTiN coatings in a micro-layer structure that is harder and more wear resistant. It is used at high speeds on alloy steels, stainless steels and aerospace materials. nano-A is a proprietary coating exclusive to Guhring, Inc.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 6.00
Mill Diameter (Decimal Inch) 0.2362
Number of Flutes 4
Length of Cut (mm) 13.00
Length of Cut (Decimal Inch) 0.5118
Material Solid Carbide
Finish/Coating Nano-A
Shank Diameter (mm) 6.00
Single or Double End Single
Overall Length (mm) 57.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 36.00/38.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Reach Length (mm) 21.00
Chipbreaker No
Extended Reach Yes
Series/List 6707

$61.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 5° Taper Angle per Side, 1/8" Small End Diam, 1-1/2" LOC, Solid Carbide 3 Flute Tapered Square End Mill - AlTiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix - USA Tool & Supply

SGS - 5° Taper Angle per Side, 1/8" Small End Diam, 1-1/2" LOC, Solid Carbide 3 Flute Tapered Square End Mill - AlTiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix


Item #: 82406927
Brand: SGS
Model #: 32356
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Square
Taper Angle Per Side 5.00
Small End Diameter (Inch) 1/8
Small End Diameter (Decimal Inch) 0.1250
Shank Diameter (Inch) 3/8
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Number of Flutes 3
Helix Angle 28
Finish/Coating AlTiN
Overall Length (Inch) 3-1/2
Material Grade Micrograin
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00035
Small End Diameter Tolerance (Decimal Inch) +0.001/-0.002

$83.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 15/16", 1-1/2" LOC, 5/8" Shank Diam, 3-5/8" OAL, 2 Flute, High Speed Steel Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Value Collection - 15/16", 1-1/2" LOC, 5/8" Shank Diam, 3-5/8" OAL, 2 Flute, High Speed Steel Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 43578806
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 15/16
Mill Diameter (Decimal Inch) 0.9375
Number of Flutes 2
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material High Speed Steel
Finish/Coating Uncoated
Shank Diameter (Inch) 5/8
Single or Double End Single
Overall Length (Inch) 3-5/8
Overall Length (Decimal Inch) 3.6250
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M7
Chipbreaker No
Extended Reach No

$53.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Widia / Part #: 4163468

Brand: Widia / Part #: 4163468


Item #: 99294415
Brand: Widia
Model #: 4163468

Product Specifications

Drill Bit Size (Decimal Inch) 0.1440
Drill Bit Size (Wire) #27
Tool Material Solid Carbide
Cutting Direction Right Hand
Coating/Finish TiAlN
Drill Point Angle 140
Spiral Type Regular Spiral
Flute Type Helical
Point Type Thinned
Coolant Through Yes
Shank Type Cylindrical
Number Of Flutes 2
Shank Diameter (Decimal Inch) 0.2362
Drill Tip Finish/Coating TiAlN
Overall Length (Decimal Inch) 2.4409
Series TDS401
Web Thinning Web-Thinned
Drill Length Type Screw Machine Length
Maximum Drilling Depth (Decimal Inch) 0.5512
Shank Length (Decimal Inch) 1.4173
Drill Point Length (Decimal Inch) 0.0235
Flute By Diameter Ratio 3xD
Tool Performance Heavy-Duty
Drill Bit Diameter Tolerance 0.0002/0.0006 in
Flute Length (Decimal Inch) 0.7874
Drill Bit Grade High Performance
Material Grade Carbide

$78.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 7/16", 1" LOC, 3/8" Shank Diam, 2-11/16" OAL, 4 Flute, Cobalt Square End Mill - Single End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HGC-4C - USA Tool & Supply

Cleveland - 7/16", 1" LOC, 3/8" Shank Diam, 2-11/16" OAL, 4 Flute, Cobalt Square End Mill - Single End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HGC-4C


Item #: 87436879
Brand: Cleveland
Model #: C32629
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 11.11
Mill Diameter (Inch) 7/16
Mill Diameter (Decimal Inch) 0.4375
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Cobalt
Finish/Coating TiCN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-11/16
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List HGC-4C

$37.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 7° Taper Angle per Side, 1/8" Small End Diam, 1" LOC, Solid Carbide 3 Flute Tapered Square End Mill - TiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix - USA Tool & Supply

SGS - 7° Taper Angle per Side, 1/8" Small End Diam, 1" LOC, Solid Carbide 3 Flute Tapered Square End Mill - TiN Finish, 3-1/2" OAL, 3/8" Shank Diam, Spiral Flute, 28° Helix


Item #: 58990771
Brand: SGS
Model #: 32382
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Square
Taper Angle Per Side 7.00
Small End Diameter (Inch) 1/8
Small End Diameter (Decimal Inch) 0.1250
Shank Diameter (Inch) 3/8
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Number of Flutes 3
Helix Angle 28
Finish/Coating TiN
Overall Length (Inch) 3-1/2
Material Grade Micrograin
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00035
Small End Diameter Tolerance (Decimal Inch) +0.001/-0.002

$83.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Iscar - 2mm, 6mm LOC, 6mm Shank Diam, 40mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Iscar - 2mm, 6mm LOC, 6mm Shank Diam, 40mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute


Item #: 78979234
Brand: Iscar
Model #: 5650886
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (mm) 2.00
Mill Diameter (Decimal Inch) 0.0787
Number of Flutes 2
Length of Cut (mm) 6.00
Length of Cut (Decimal Inch) 0.2362
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 6.00
Single or Double End Single
Overall Length (mm) 40.00
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Helix Style Medium
Mill Diameter Tolerance (mm) -0.014 to 0.028
Material Grade Ultra Fine Grain
Manufacturer Grade IC903
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (mm) 0.000/-0.009

$72.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sumitomo - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Sumitomo - 1/2", 1" LOC, 1/2" Shank Diam, 3" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 45237120
Brand: Sumitomo
Model #: U100252
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 2
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating TiN
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Chipbreaker No
Extended Reach No

$74.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Iscar - 7.5mm, 20mm LOC, 8mm Shank Diam, 63mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - USA Tool & Supply

Iscar - 7.5mm, 20mm LOC, 8mm Shank Diam, 63mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 93009926
Brand: Iscar
Model #: 5621582
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 7.50
Mill Diameter (Decimal Inch) 0.2953
Number of Flutes 4
Length of Cut (mm) 20.00
Length of Cut (Decimal Inch) 0.7874
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (mm) 8.00
Single or Double End Single
Overall Length (mm) 63.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (mm) -0.025 to 0.047
Material Grade Submicron
Manufacturer Grade IC900
Extended Reach No
Shank Diameter Tolerance (mm) 0.000/-0.009

$63.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It