Email: sales@usatoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Milling > Router Bits (ET04) - (3197 Products)

Milling > Router Bits (ET04)
OSG - 3/8" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 3/8" Shank Diam, Use on Glass Reinforced Polyester, Graphite Composite Laminates, Kevlar, Phenolic Epoxy - USA Tool & Supply

OSG - 3/8" Diam, 1" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 3/8" Shank Diam, Use on Glass Reinforced Polyester, Graphite Composite Laminates, Kevlar, Phenolic Epoxy


Item #: 55474258
Brand: OSG
Model #: 640-3751
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 9.53
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
End Type Plain (No End)
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 3/8
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating Uncoated
Material Application Glass Reinforced Polyester; Graphite Composite Laminates; Kevlar; Phenolic Epoxy
Cutting Direction Right Hand

$33.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - 2" OAL, 1/4" Shank Diam - USA Tool & Supply

M.A. Ford - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - 2" OAL, 1/4" Shank Diam


Item #: 50888478
Brand: M.A. Ford
Model #: 23125000B
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Burr
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2
Material Solid Carbide
Finish/Coating Uncoated

$25.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite - USA Tool & Supply

Made in USA - 1/4" Diam, 3/4" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite


Item #: 51950186
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type End Mill
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/4
Overall Length (Inch) 3
Material Solid Carbide
Finish/Coating Uncoated
Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction Right Hand

$23.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite - USA Tool & Supply

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite


Item #: 51984821
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Drill Point
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating ZrN
Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction Right Hand

$27.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 1/4" Diam, 2-1/8" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/4" Shank Diam, Use on Composites - USA Tool & Supply

Onsrud - 1/4" Diam, 2-1/8" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/4" Shank Diam, Use on Composites


Item #: 44192292
Brand: Onsrud
Model #: 66-919ALTIN
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 6.35
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type End Mill
Length of Cut (Decimal Inch) 2.1250
Length of Cut (Inch) 2-1/8
Shank Diameter (mm) 6.35
Shank Diameter (Inch) 1/4
Overall Length (Inch) 4
Material Solid Carbide
Finish/Coating AlTiN
Material Application Composites
Cutting Direction Right Hand

$93.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/8" Diam, 1/2" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 1-1/2" OAL, 1/8" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium - USA Tool & Supply

Made in USA - 1/8" Diam, 1/2" LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 1-1/2" OAL, 1/8" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium


Item #: 51963239
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (Inch) 1/8
Cutting Diameter (Decimal Inch) 0.1250
End Type Plain (No End)
Length of Cut (Decimal Inch) 0.5000
Length of Cut (Inch) 1/2
Shank Diameter (Inch) 1/8
Overall Length (Inch) 1-1/2
Material Solid Carbide
Finish/Coating ZrN
Material Application Cast Iron; Stainless; Steel; Titanium
Cutting Direction Right Hand

$11.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 1" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite - USA Tool & Supply

Made in USA - 1/4" Diam, 1" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite


Item #: 51950517
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Product Specifications
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type End Mill
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating ZrN
Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction Right Hand

$27.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Fiberglass - USA Tool & Supply

Accupro - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Fiberglass


Item #: 71176531
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Burr
Length of Cut (Decimal Inch) 0.7500
Length of Cut (Inch) 3/4
Shank Diameter (Inch) 1/4
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$26.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 12mm Diam, 38mm LOC, Square End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 89mm OAL, Use on Carbon Composite - USA Tool & Supply

SGS - 12mm Diam, 38mm LOC, Square End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 89mm OAL, Use on Carbon Composite


Item #: 47445275
Brand: SGS
Model #: 83111
Exact Tooling IR#: 04

Features and Benefits

Square ends are used for general milling applications including slotting, profiling and plunge cutting.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Product Specifications
Cutting Diameter (mm) 12.00
End Type Square
Length of Cut (mm) 38.00
Shank Diameter (mm) 12.00
Overall Length (mm) 89.00
Material Solid Carbide
Finish/Coating TiB2
Material Application Carbon Composite
Cutting Direction Right Hand
Shank Length (Decimal Inch) 2.0000

$261.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 1/2" Diam, 1-5/8" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/2" Shank Diam, Use on Composites - USA Tool & Supply

Onsrud - 1/2" Diam, 1-5/8" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 1/2" Shank Diam, Use on Composites


Item #: 44192086
Brand: Onsrud
Model #: 66-940ALTIN
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 12.70
Cutting Diameter (Inch) 1/2
Cutting Diameter (Decimal Inch) 0.5000
End Type Drill Point
Length of Cut (Decimal Inch) 1.6250
Length of Cut (Inch) 1-5/8
Shank Diameter (mm) 12.70
Shank Diameter (Inch) 1/2
Overall Length (Inch) 4
Material Solid Carbide
Finish/Coating AlTiN
Material Application Composites
Cutting Direction Right Hand

$175.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 6mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL - USA Tool & Supply

M.A. Ford - 6mm Diam, Drill Point End, Solid Carbide Diamond Pattern Router Bit - 51mm OAL


Item #: 50888502
Brand: M.A. Ford
Model #: 23123620D
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Drill Point
Length of Cut (Decimal Inch) 0.7480
Shank Diameter (mm) 6.00
Overall Length (mm) 51.00
Material Solid Carbide
Finish/Coating Uncoated

$24.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 3/16" Diam, 5/8" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 3/16" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite - USA Tool & Supply

Made in USA - 3/16" Diam, 5/8" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 3/16" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite


Item #: 51987956
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (Inch) 3/16
Cutting Diameter (Decimal Inch) 0.1875
End Type Burr
Length of Cut (Decimal Inch) 0.6250
Length of Cut (Inch) 5/8
Shank Diameter (Inch) 3/16
Overall Length (Inch) 2
Material Solid Carbide
Finish/Coating AlTiN
Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction Right Hand

$22.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 49mm Diam, 0.63" LOC, Plain End, Powdered Metal Diamond Pattern Router Bit - Right Hand Cut, 16mm OAL - USA Tool & Supply

Controx - 49mm Diam, 0.63" LOC, Plain End, Powdered Metal Diamond Pattern Router Bit - Right Hand Cut, 16mm OAL


Item #: 58191537
Brand: Controx
Model #: 73000490162310
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Proprietary coatings are specially designed by the manufacturer.
Product Specifications
Cutting Diameter (mm) 49.00
Cutting Diameter (Decimal Inch) 1.9290
End Type Plain (No End)
Length of Cut (mm) 16.00
Length of Cut (Decimal Inch) 0.6300
Length of Cut (Inch) 0.6300
Shank Diameter (mm) 0.00
Overall Length (mm) 16.00
Material Powdered Metal
Finish/Coating Proprietary
Cutting Direction Right Hand

$881.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 1/4" Diam, 1-1/2" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-1/2" OAL, 1/4" Shank Diam, Use on Composites - USA Tool & Supply

Onsrud - 1/4" Diam, 1-1/2" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3-1/2" OAL, 1/4" Shank Diam, Use on Composites


Item #: 51560852
Brand: Onsrud
Model #: 66-916ALTIN
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Cutting Diameter (mm) 6.35
Cutting Diameter (Inch) 1/4
Cutting Diameter (Decimal Inch) 0.2500
End Type Drill Point
Length of Cut (Decimal Inch) 1.5000
Length of Cut (Inch) 1-1/2
Shank Diameter (mm) 6.35
Shank Diameter (Inch) 1/4
Overall Length (Inch) 3-1/2
Material Solid Carbide
Finish/Coating AlTiN
Material Application Composites
Cutting Direction Right Hand

$93.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 6mm Diam, 18mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass - USA Tool & Supply

Made in USA - 6mm Diam, 18mm LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 63mm OAL, Use on Fiberglass


Item #: 51938181
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Drill Point
Length of Cut (mm) 18.00
Length of Cut (Decimal Inch) 0.7087
Shank Diameter (mm) 6.00
Overall Length (mm) 63.00
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$23.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 3/8" Diam, 2" LOC, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 3/8" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium - USA Tool & Supply

Made in USA - 3/8" Diam, 2" LOC, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 4" OAL, 3/8" Shank Diam, Use on Cast Iron, Stainless, Steel, Titanium


Item #: 51971091
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Cutting Diameter (Inch) 3/8
Cutting Diameter (Decimal Inch) 0.3750
Length of Cut (Decimal Inch) 2.0000
Length of Cut (Inch) 2
Shank Diameter (Inch) 3/8
Overall Length (Inch) 4
Material Solid Carbide
Finish/Coating TiN
Material Application Cast Iron; Stainless; Steel; Titanium
Cutting Direction Right Hand

$50.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 7/16" Diam, 0.45" LOC, Square End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-61/64" OAL - USA Tool & Supply

Controx - 7/16" Diam, 0.45" LOC, Square End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-61/64" OAL


Item #: 58191719
Brand: Controx
Model #: 73350110112301
Exact Tooling IR#: 04

Features and Benefits

Square ends are used for general milling applications including slotting, profiling and plunge cutting.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Proprietary coatings are specially designed by the manufacturer.
Product Specifications
Cutting Diameter (mm) 11.11
Cutting Diameter (Inch) 7/16
Cutting Diameter (Decimal Inch) 0.4375
End Type Square
Length of Cut (mm) 11.43
Length of Cut (Decimal Inch) 0.4500
Length of Cut (Inch) 0.4500
Shank Diameter (mm) 12.70
Overall Length (mm) 74.93
Overall Length (Inch) 2-61/64
Material Solid Carbide
Finish/Coating Proprietary
Cutting Direction Right Hand

$350.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 6mm Diam, 18mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 50mm OAL - USA Tool & Supply

Made in USA - 6mm Diam, 18mm LOC, Plain End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 50mm OAL


Item #: 51997674
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Plain (No End), also known as Safe End router bits, are used for edge routing and applications when no floor finish cuts are required.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 6.00
Cutting Diameter (Decimal Inch) 0.2362
End Type Plain (No End)
Length of Cut (mm) 18.00
Length of Cut (Decimal Inch) 0.7087
Shank Diameter (mm) 6.00
Overall Length (mm) 50.00
Material Solid Carbide
Finish/Coating Uncoated
Cutting Direction Right Hand

$16.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2" Diam, 1" LOC, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/2" Shank Diam, Use on Fiberglass - USA Tool & Supply

Accupro - 1/2" Diam, 1" LOC, Fishtail Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/2" Shank Diam, Use on Fiberglass


Item #: 71176804
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Fishtail ends are designed with a double flute (or reverse V-shaped ends) and produce a flat surface at the bottom of the workpiece. Ideal for fine detail work and on thin materials.
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (Inch) 1/2
Cutting Diameter (Decimal Inch) 0.5000
End Type Fishtail Point
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Material Solid Carbide
Finish/Coating Uncoated
Material Application Fiberglass
Cutting Direction Right Hand

$81.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 5/16" Diam, 1" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Left Hand Cut, 2-1/2" OAL, 5/16" Shank Diam, Use on Carbon Composite - USA Tool & Supply

SGS - 5/16" Diam, 1" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Left Hand Cut, 2-1/2" OAL, 5/16" Shank Diam, Use on Carbon Composite


Item #: 69514008
Brand: SGS
Model #: 73081
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner
Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Diamond (PCD) coating is one of the hardest coatings. It is commonly used on concrete, fiberglass, plastic, stone, aluminum alloy and extremely difficult-to-machine materials.
Product Specifications
Cutting Diameter (Inch) 5/16
Cutting Diameter (Decimal Inch) 0.3125
End Type End Mill
Length of Cut (Decimal Inch) 1.0000
Length of Cut (Inch) 1
Shank Diameter (Inch) 5/16
Overall Length (Inch) 2-1/2
Material Solid Carbide
Finish/Coating Diamond
Material Application Carbon Composite
Cutting Direction Left Hand
Shank Length (Inch) 1-1/2
Shank Length (Decimal Inch) 1.5000
Cutting Diameter Tolerance (Decimal Inch) +0.000/-0.005

$215.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It