Machinery > Drill Presses & Tapping Machines (ET04) - (171 Products)
Machinery > Drill Presses & Tapping Machines (ET04)
Jet - 16-1/2" Swing, Step Pulley Drill Press - 16 Speed, 3/4 hp, Single Phase
Item #: 01741479
Brand: Jet
Model #: 354169
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 16-1/2 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 4-3/8 |
| Horsepower (HP) | 0.75 |
| Voltage | 115/230 |
| Minimum Spindle Speed (RPM) | 200 |
| Maximum Spindle Speed (RPM) | 3630 |
| Drilling Capacity in Steel (Inch) | 5/8 |
| Maximum Chuck Capacity (Inch) | 5/8 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 16 |
| Spindle to Table Distance (Inch) | 29-1/8 |
| Spindle to Column Distance (Inch) | 8-1/4 |
| Table Width/Diameter (Inch) | 13-3/4 |
| Table Load Capacity (Lb.) | 19.63 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Inch) | 12-1/2 |
| Base Width (Inch) | 19-5/8 |
| Column Diameter (Inch) | 3-1/8 |
| Overall Length (Decimal Inch) | 12.7500 |
| Overall Length (Inch) | 12-3/4 |
| Overall Height (Inch) | 54-1/2 |
| Overall Height (Decimal Inch) | 54.5000 |
| Overall Depth (Inch) | 23-1/2 |
| Overall Depth (Decimal Inch) | 23.5000 |
$1,256.24
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Palmgren - 17" Swing, Step Pulley Drill Press - 16 Speed, 1 hp, Three Phase
Item #: 45989290
Brand: Palmgren
Model #: 9680178
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 17 |
| Spindle Speed Control | Step Pulley |
| Phase | 3 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 5 |
| Horsepower (HP) | 1 |
| Voltage | 240 |
| Minimum Spindle Speed (RPM) | 138 |
| Maximum Spindle Speed (RPM) | 3476 |
| Drilling Capacity in Steel (Inch) | 5/8 |
| Drilling Capacity in Cast Iron (Inch) | 7/8 |
| Tapping Capacity in Steel (Inch) | 5/8 |
| Tapping Capacity in Cast Iron (Inch) | 7/8 |
| Maximum Chuck Capacity (Inch) | 5/8 |
| Number of Spindle Speeds | 16 |
| Spindle to Column Distance (Inch) | 8-1/2 |
| Table Length (Decimal Inch) | 14.3750 |
| Table Width/Diameter (Decimal Inch) | 14.3750 |
| Table Load Capacity (Lb.) | 125.00 |
| Table Slot Size (Decimal Inch) | 0.6250 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 28.0000 |
| Base Width (Decimal Inch) | 15.5000 |
| Base Depth (Decimal Inch) | 3.0000 |
| Column Diameter (Decimal Inch) | 3.5000 |
| Overall Length (Inch) | 28 |
| Overall Height (Inch) | 68 |
| Overall Depth (Inch) | 15-1/2 |
$1,613.24
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Dake - 14-1/8" Swing, Step Pulley Drill Press - 9 Speed, 1/2 hp, Single Phase
Item #: 41732025
Brand: Dake
Model #: 977200
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 14-1/8 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 3-1/8 |
| Horsepower (HP) | 0.5 |
| Voltage | 110 |
| Minimum Spindle Speed (RPM) | 240 |
| Maximum Spindle Speed (RPM) | 240/3400 |
| Drilling Capacity in Steel (Inch) | 5/8 |
| Number of Spindle Speeds | 9 |
| Spindle to Table Distance (Inch) | 28-1/2 |
| Spindle to Column Distance (Inch) | 7-1/16 |
| Column Diameter (Inch) | 3-1/8 |
| Overall Height (Inch) | 64 |
$2,318.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Palmgren - 20" Swing, Step Pulley Drill Press - 16 Speed, 1-1/2 hp, Three Phase
Item #: 45989332
Brand: Palmgren
Model #: 9680210
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Step Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 5 |
| Horsepower (HP) | 1.5 |
| Voltage | 240 |
| Minimum Spindle Speed (RPM) | 120 |
| Maximum Spindle Speed (RPM) | 3605 |
| Drilling Capacity in Steel (Inch) | 1 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/4 |
| Tapping Capacity in Steel (Inch) | 3/4 |
| Tapping Capacity in Cast Iron (Inch) | 1 |
| Maximum Chuck Capacity (Inch) | 3/4 |
| Number of Spindle Speeds | 16 |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Decimal Inch) | 19.2500 |
| Table Width/Diameter (Decimal Inch) | 18.7500 |
| Table Load Capacity (Lb.) | 200.00 |
| Table Slot Size (Decimal Inch) | 0.6250 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 30.0000 |
| Base Width (Decimal Inch) | 19.5000 |
| Base Depth (Decimal Inch) | 4.0000 |
| Column Diameter (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 30 |
| Overall Height (Inch) | 70 |
| Overall Depth (Inch) | 19-1/2 |
$2,545.29
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 15" Swing, Step Pulley Drill Press - 16 Speed, 3/4 hp, Single Phase
Item #: 62111992
Brand: Jet
Model #: 354400
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 15 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 3-1/8 |
| Horsepower (HP) | 3/4 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 200 |
| Maximum Spindle Speed (RPM) | 3630 |
| Drilling Capacity in Steel (Inch) | 1/2 |
| Drilling Capacity in Cast Iron (Inch) | 5/8 |
| Maximum Chuck Capacity (Inch) | 5/8 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 16 |
| Spindle to Table Distance (Inch) | 24 |
| Spindle to Column Distance (Inch) | 7-1/2 |
| Table Length (Inch) | 11-1/2 |
| Table Width/Diameter (Inch) | 11-1/2 |
| Table Load Capacity (Lb.) | 44.00 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Inch) | 19-1/2 |
| Base Width (Inch) | 11 |
| Column Diameter (Inch) | 2-7/8 |
| Overall Length (Inch) | 31 |
| Overall Height (Inch) | 63 |
| Overall Depth (Inch) | 13 |
$1,076.32
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 63" Swing, Geared Head Radial Arm Drill Press - 12 Speed, 5 hp, Three Phase
Item #: 42523324
Brand: Clausing
Model #: CLC1600H
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 63.0000 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 5MT |
| Spindle Travel Length (Decimal Inch) | 10.6300 |
| Horsepower (HP) | 5 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 40 |
| Maximum Spindle Speed (RPM) | 1920 |
| Drilling Capacity in Steel (Inch) | 2-19/32 |
| Drilling Capacity in Cast Iron (Inch) | 2-23/64 |
| Tapping Capacity in Steel (Decimal Inch) | 1.9700 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 2.3600 |
| Maximum Chuck Capacity (Decimal Inch) | 1.0000 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 12 |
| Power Downfeed Rate | 0.003 |
| Spindle to Table Distance (Decimal Inch) | 63.0000 |
| Minimum Spindle to Column Distance (Inch) | 13-25/32 |
| Spindle to Column Distance (mm) | 1600.00 |
| Spindle to Column Distance (Decimal Inch) | 63.0000 |
| Table Length (Decimal Inch) | 70.9000 |
| Table Width/Diameter (Decimal Inch) | 40.4000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 100.4000 |
| Base Width (Decimal Inch) | 38.2000 |
| Base Depth (Decimal Inch) | 7.9000 |
| Column Diameter (Decimal Inch) | 17.0000 |
| Radial Arm Length (Inch) | 63 |
| Radial Arm Length (Feet) | 6.00 |
| Overall Length (Decimal Inch) | 105.2000 |
| Overall Height (Decimal Inch) | 94.875 |
| Overall Depth (Inch) | 44.1000 |
| Includes | Box Table; Operations & Parts Manual; Tool Kit |
$39,679.65
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 10-7/16" Swing, Geared Head Drill & Tap Press - Variable Speed, 2 hp, Three Phase
Item #: 55591192
Brand: Jet
Model #: 354246
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill and tap presses are gear headed machines with forward and reversing spindles specifically for drilling and tapping operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill & Tap Press |
| Swing Distance (Inch) | 10.4370 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 4MT |
| Spindle Travel Length (Inch) | 6 |
| Spindle Travel Length (Decimal Inch) | 6.0000 |
| Horsepower (HP) | 2 |
| Voltage | 460 |
| Minimum Spindle Speed (RPM) | 60 |
| Maximum Spindle Speed (RPM) | 2000 |
| Drilling Capacity in Steel (Inch) | 2 |
| Drilling Capacity in Cast Iron (Inch) | 1 |
| Number of Spindle Speeds | variable |
| Power Downfeed Rate | 0.0080; 0.0040; 0.0020 |
| Spindle to Table Distance (Inch) | 25-1/2 |
| Spindle to Table Distance (Decimal Inch) | 25.5000 |
| Table Length (Inch) | 22 |
| Table Width/Diameter (Inch) | 18-3/4 |
| Table Load Capacity (Lb.) | 154.00 |
| Table Slot Size (Decimal Inch) | 7.4370 |
| Base Length (Inch) | 27 |
| Base Width (Decimal Inch) | 19.0000 |
| Base Depth (Inch) | 19 |
| Column Diameter (Inch) | 4-1/2 |
$8,362.62
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Palmgren - 20" Swing, Step Pulley Drill Press - 16 Speed, 1-1/2 hp, Single Phase
Item #: 45989282
Brand: Palmgren
Model #: 9680209
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 5 |
| Horsepower (HP) | 1.5 |
| Voltage | 120/240 |
| Minimum Spindle Speed (RPM) | 120 |
| Maximum Spindle Speed (RPM) | 3605 |
| Drilling Capacity in Steel (Inch) | 1 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/4 |
| Tapping Capacity in Steel (Inch) | 3/4 |
| Tapping Capacity in Cast Iron (Inch) | 1 |
| Maximum Chuck Capacity (Inch) | 3/4 |
| Number of Spindle Speeds | 16 |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Decimal Inch) | 19.2500 |
| Table Width/Diameter (Decimal Inch) | 18.7500 |
| Table Load Capacity (Lb.) | 200.00 |
| Table Slot Size (Decimal Inch) | 0.6250 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 30.0000 |
| Base Width (Decimal Inch) | 19.5000 |
| Base Depth (Decimal Inch) | 4.0000 |
| Column Diameter (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 30 |
| Overall Height (Inch) | 70 |
| Overall Depth (Inch) | 19-1/2 |
$2,342.85
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Summit - Floor & Bench Drill Presses Stand Type: Head & Column Assembly Machine Type: Radial Arm Drill Press
Item #: 31711302
Brand: Summit
Model #: 3H
Exact Tooling IR#: 04
Features and Benefits
Head and column assemblies are available to mount in single or multiple configurations for standard or custom drilling tables.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Floor & Bench Drill Presses; Stand Type: Head & Column Assembly ; Machine Type: Radial Arm Drill Press ; Swing Distance (Decimal Inch): 78.8000 ; Spindle Speed Control: Geared Head ; Phase: 3 ; Spindle Taper Size: 4MT
| Stand Type | Head & Column Assembly |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 78.8000 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 4MT |
| Spindle Travel Length (Decimal Inch) | 9.8000 |
| Horsepower (HP) | 3 |
| Voltage | 220/440/360 |
| Minimum Spindle Speed (RPM) | 38 |
| Maximum Spindle Speed (RPM) | 3000 |
| Drilling Capacity in Steel (Inch) | 1-1/4 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 8 |
| Spindle to Column Distance (Decimal Inch) | 7.9000 |
| Table Length (Decimal Inch) | 17.7000 |
| Table Width/Diameter (Decimal Inch) | 15.7000 |
| Base Length (Decimal Inch) | 59.0000 |
| Base Width (Decimal Inch) | 29.0000 |
| Base Depth (Decimal Inch) | 6.3000 |
| Column Diameter (Decimal Inch) | 9.4500 |
| Radial Arm Length (Inch) | 36 |
| Radial Arm Length (Feet) | 3.00 |
| Overall Length (Inch) | 36 |
| Overall Height (Inch) | 91 |
| Overall Depth (Inch) | 30 |
$14,348.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 85-1/2 Inch Long x 25-1/2 Inch Deep x 29-1/2 Inch High, 4 Spindle Drill Press Table Assembly - Accomodates 4 Heads and Column Assembly
Item #: 76958537
Brand: Clausing
Model #: 20-504
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Product Type | 4-Spindle Table Assembly |
| Includes | (2) Legs; Table |
| Machine Compatibility | 4 Head & Column Assemblies |
| Overall Height (Decimal Inch) | 29.500 |
| Overall Depth (Decimal Inch) | 25.5000 |
| Overall Length (Decimal Inch) | 85.5000 |
$4,557.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 62.2" Swing, Geared Head Radial Arm Drill Press - 12 Speed, 7-1/2 hp, Three Phase
Item #: 75698472
Brand: Clausing
Model #: CL1600H
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 62.2000 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 5MT |
| Spindle Travel Length (Decimal Inch) | 14.6000 |
| Horsepower (HP) | 7.5 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 40 |
| Maximum Spindle Speed (RPM) | 1920 |
| Drilling Capacity in Steel (Inch) | 1-31/32 |
| Drilling Capacity in Cast Iron (Inch) | 2-23/64 |
| Tapping Capacity in Steel (Decimal Inch) | 1.5700 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 1.9700 |
| Maximum Chuck Capacity (Decimal Inch) | 1.0000 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 12 |
| Power Downfeed Rate | 0.023 |
| Spindle to Table Distance (Decimal Inch) | 55.9000 |
| Minimum Spindle to Column Distance (Inch) | 13-25/32 |
| Spindle to Column Distance (mm) | 1600.00 |
| Spindle to Column Distance (Decimal Inch) | 63.0000 |
| Table Length (Decimal Inch) | 70.9000 |
| Table Width/Diameter (Decimal Inch) | 40.4000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 97.6000 |
| Base Width (Decimal Inch) | 41.3000 |
| Base Depth (Decimal Inch) | 8.2600 |
| Column Diameter (Decimal Inch) | 12.6000 |
| Radial Arm Length (Inch) | 62 |
| Radial Arm Length (Feet) | 5.00 |
| Overall Length (Decimal Inch) | 105.2000 |
| Overall Height (Decimal Inch) | 94.875 |
| Overall Depth (Inch) | 44.1000 |
| Includes | Box Table; Operations & Parts Manual; Tool Kit |
$79,557.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 15" Swing, Step Pulley Drill Press - 16 Speed, 3/4 hp, Single Phase
Item #: 62112008
Brand: Jet
Model #: 354401
Exact Tooling IR#: 04
Features and Benefits
Bench drill presses, also known as bench top, are stationary presses that are mounted to a workbench. They are used for precision applications, on smaller workpieces and where limited space is a concern.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 15 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 3-1/8 |
| Horsepower (HP) | 3/4 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 200 |
| Maximum Spindle Speed (RPM) | 3630 |
| Drilling Capacity in Steel (Inch) | 1/2 |
| Drilling Capacity in Cast Iron (Inch) | 5/8 |
| Maximum Chuck Capacity (Inch) | 5/8 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 16 |
| Spindle to Table Distance (Inch) | 15-1/2 |
| Spindle to Column Distance (Inch) | 7-1/2 |
| Table Length (Inch) | 11-1/2 |
| Table Width/Diameter (Inch) | 11-1/2 |
| Table Load Capacity (Lb.) | 44.00 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Inch) | 18 |
| Base Width (Inch) | 10-1/2 |
| Column Diameter (Inch) | 2-7/8 |
| Overall Length (Inch) | 31 |
| Overall Height (Inch) | 39-1/4 |
| Overall Depth (Inch) | 13 |
$965.71
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 16-1/2" Swing, Variable Speed Pulley Drill Press - Variable Speed, 3/4 hp, Single Phase
Item #: 76485754
Brand: Jet
Model #: 716300
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Decimal Inch) | 16.5000 |
| Swing Distance (Inch) | 16-1/2 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 4-3/8 |
| Spindle Travel Length (Decimal Inch) | 4.3750 |
| Horsepower (HP) | 0.75 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 230 |
| Maximum Spindle Speed (RPM) | 3630 |
| Maximum Chuck Capacity (Decimal Inch) | 0.6250 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 29-1/8 |
| Table Length (Decimal Inch) | 14.5000 |
| Table Width/Diameter (Decimal Inch) | 18.5000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Inch) | 12-1/2 |
| Base Width (Inch) | 19-5/8 |
| Column Diameter (Inch) | 3-1/8 |
| Overall Length (Inch) | 23-1/2 |
| Overall Height (Inch) | 65-1/8 |
| Overall Depth (Inch) | 12.8000 |
$1,432.18
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 20" Swing, Geared Head Drill Press - 12 Speed, 2 hp, Three Phase
Item #: 77209914
Brand: Jet
Model #: 354020
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 5 |
| Horsepower (HP) | 2 |
| Voltage | 220; 230 |
| Minimum Spindle Speed (RPM) | 60 |
| Maximum Spindle Speed (RPM) | 3000 |
| Drilling Capacity in Steel (Inch) | 1-1/4 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/2 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 12 |
| Spindle to Table Distance (Inch) | 30-1/2 |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Inch) | 21-3/4 |
| Table Width/Diameter (Inch) | 19-1/2 |
| Table Load Capacity (Lb.) | 275.00 |
| Table Slot Size (Inch) | 5/8 |
| Base Length (Inch) | 26 |
| Base Width (Inch) | 18 |
| Base Depth (Inch) | 5 |
| Column Diameter (Inch) | 4-1/2 |
| Overall Length (Inch) | 32 |
| Overall Height (Inch) | 24 |
| Overall Depth (Inch) | 71 |
| Includes | Draw Bar; Drill Chuck Arbor |
$5,466.56
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 15" Swing, Variable Speed Pulley Drill Press - Variable Speed, 1 hp, Three Phase
Item #: 41934597
Brand: Jet
Model #: 354551
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 15 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 3 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 6 |
| Horsepower (HP) | 1 |
| Voltage | 220/440 |
| Minimum Spindle Speed (RPM) | 400 |
| Maximum Spindle Speed (RPM) | 5000 |
| Drilling Capacity in Steel (Inch) | 1/2 |
| Drilling Capacity in Cast Iron (Inch) | 5/8 |
| Maximum Chuck Capacity (Inch) | 1/2 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 25-3/4 |
| Spindle to Column Distance (Inch) | 7-1/2 |
| Table Length (Inch) | 15 |
| Table Width/Diameter (Inch) | 18 |
| Table Load Capacity (Lb.) | 90.00 |
| Table Slot Size (Inch) | 1/2 |
| Base Length (Inch) | 20-7/16 |
| Base Width (Inch) | 14-3/16 |
| Base Depth (Inch) | 3-1/8 |
| Column Diameter (Inch) | 3 |
| Overall Length (Inch) | 30 |
| Overall Height (Inch) | 71 |
| Overall Depth (Inch) | 20 |
$2,716.93
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Servo - 7" Swing, Frequency Drill Press - Variable Speed, 0.1 hp, Single Phase
Item #: 09508011
Brand: Servo
Model #: M-7000
Exact Tooling IR#: 04
Features and Benefits
Bench drill presses, also known as bench top, are stationary presses that are mounted to a workbench. They are used for precision applications, on smaller workpieces and where limited space is a concern.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Frequency drive systems are similar to variable speed pulleys, but the speed is controlled electronically with fewer moving parts. These drive systems feature several speeds within a specified speed range.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 7 |
| Spindle Speed Control | Frequency |
| Phase | 1 |
| Horsepower (HP) | 0.1 |
| Voltage | 110; 115 |
| Minimum Spindle Speed (RPM) | 200 |
| Maximum Spindle Speed (RPM) | 20000 |
| Drilling Capacity in Steel (Inch) | 1/8 |
| Maximum Chuck Capacity (mm) | 3.18 |
| Maximum Chuck Capacity (Inch) | 1/8 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (mm) | 152.40 |
| Spindle to Table Distance (Inch) | 6 |
| Spindle to Column Distance (mm) | 88.90 |
| Spindle to Column Distance (Decimal Inch) | 3.5000 |
| Table Length (Decimal Inch) | 6.5000 |
| Table Length (mm) | 165.10 |
| Table Width/Diameter (Decimal Inch) | 5.9843 |
| Column Diameter (Decimal Inch) | 1.2205 |
| Column Diameter (mm) | 31.00 |
| Overall Length (mm) | 181.00 |
| Overall Length (Decimal Inch) | 7.1260 |
| Overall Height (mm) | 457.20 |
| Overall Height (Inch) | 18 |
| Overall Depth (Decimal Inch) | 11.7717 |
| Overall Depth (mm) | 299.00 |
$2,225.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 49.21" Swing, Geared Head Radial Arm Drill Press - 12 Speed, 5 hp, Three Phase
Item #: 44373678
Brand: Clausing
Model #: CLC1250H
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 49.2100 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 5MT |
| Spindle Travel Length (Decimal Inch) | 10.6300 |
| Horsepower (HP) | 5 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 56 |
| Maximum Spindle Speed (RPM) | 1450 |
| Drilling Capacity in Steel (Inch) | 1-31/32 |
| Drilling Capacity in Cast Iron (Inch) | 2-23/64 |
| Tapping Capacity in Steel (Decimal Inch) | 1.5700 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 1.9700 |
| Maximum Chuck Capacity (Decimal Inch) | 0.7500 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 12 |
| Power Downfeed Rate | 0.023 |
| Spindle to Table Distance (Decimal Inch) | 52.9500 |
| Minimum Spindle to Column Distance (Inch) | 14-21/32 |
| Spindle to Column Distance (mm) | 1250.00 |
| Spindle to Column Distance (Decimal Inch) | 49.2100 |
| Table Length (Decimal Inch) | 48.0000 |
| Table Width/Diameter (Decimal Inch) | 29.1000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 70.3000 |
| Base Width (Decimal Inch) | 30.9000 |
| Base Depth (Decimal Inch) | 7.8000 |
| Column Diameter (Decimal Inch) | 11.8100 |
| Radial Arm Length (Inch) | 49 |
| Radial Arm Length (Feet) | 4.00 |
| Overall Length (Decimal Inch) | 81.1000 |
| Overall Height (Decimal Inch) | 88.25 |
| Overall Depth (Inch) | 39.2000 |
| Includes | Box Table; Operations & Parts Manual; Tool Kit |
$36,439.52
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Vectrax - 20-7/16" Swing, Geared Head Drill Press - Variable Speed, 1 hp, Single Phase
Item #: 09542903
Brand: Vectrax
Model #: RF-40HS/1 220V
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (mm) | 519.11 |
| Swing Distance (Inch) | 20-7/16 |
| Spindle Speed Control | Geared Head |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Decimal Inch) | 5.1181 |
| Horsepower (HP) | 1 |
| Voltage | 220 |
| Minimum Spindle Speed (RPM) | 65 |
| Maximum Spindle Speed (RPM) | 1550 |
| Drilling Capacity in Steel (mm) | 39.69 |
| Drilling Capacity in Steel (Inch) | 1-9/16 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Column Distance (Decimal Inch) | 10.2362 |
| Table Length (Decimal Inch) | 22.0000 |
| Table Length (mm) | 555.00 |
| Table Width/Diameter (mm) | 495.00 |
| Table Width/Diameter (Decimal Inch) | 19.5000 |
| Table Slot Size (mm) | 16 x 26 |
| Column Diameter (Inch) | 4-1/2 |
| Column Diameter (mm) | 114.30 |
| Overall Length (Decimal Inch) | 29.0157 |
| Overall Height (Decimal Inch) | 71.5354 |
| Overall Depth (Decimal Inch) | 33.0315 |
$3,545.83
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Vectrax - 20" Swing, Variable Speed Pulley Drill Press - Variable Speed, 1-1/2 hp, Single Phase
Item #: 00492108
Brand: Vectrax
Model #: RF-401VS/1 VTX
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 4-1/2 |
| Horsepower (HP) | 1-1/2 |
| Voltage | 220 |
| Minimum Spindle Speed (RPM) | 340 |
| Maximum Spindle Speed (RPM) | 2000 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Inch) | 22 |
| Table Width/Diameter (Inch) | 19 |
| Table Slot Size (Inch) | 1/2 |
| Table Tilt (Degrees) | 0.00 |
| Base Length (Inch) | 25 |
| Base Width (Inch) | 19 |
| Column Diameter (Inch) | 4 |
| Overall Height (Inch) | 70 |
$3,309.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 10-7/16" Swing, Variable Speed Pulley Drill & Tap Press - Variable Speed, 2 hp, Three Phase
Item #: 50637297
Brand: Jet
Model #: 354225
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill and tap presses are gear headed machines with forward and reversing spindles specifically for drilling and tapping operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill & Tap Press |
| Swing Distance (Inch) | 10.4370 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 6 |
| Spindle Travel Length (Decimal Inch) | 6.0000 |
| Horsepower (HP) | 2 |
| Voltage | 230 |
| Minimum Spindle Speed (RPM) | 65; 245 |
| Maximum Spindle Speed (RPM) | 2000; 540 |
| Drilling Capacity in Steel (Inch) | 1-3/8 |
| Drilling Capacity in Cast Iron (Inch) | 7/8 |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 30-1/4 |
| Spindle to Table Distance (Decimal Inch) | 30.2500 |
| Table Length (Inch) | 22 |
| Table Width/Diameter (Inch) | 18-3/4 |
| Table Load Capacity (Lb.) | 154.00 |
| Table Slot Size (Decimal Inch) | 7.4370 |
| Base Length (Inch) | 27 |
| Base Width (Decimal Inch) | 19.0000 |
| Base Depth (Inch) | 19 |
| Column Diameter (Inch) | 4-1/2 |
$6,809.06
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It