HAZ06 FOAM FAST 74 JUMBO CYL

Item #: LF53188545
Manufacturer: 3M
Mfg #: 0005111118

Technical Specifications:
•Brand Name: 3M •Hazard Code: HAZ06

Description:


Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 495.0000

8X51X3.15 5A MED DEBURR BONDED

Item #: TM2364334
Manufacturer: 3M
Mfg #: 0007630864

Technical Specifications:
*Brand Name: 3M

Description:


Shipping Info:
*Actual Weight - 47.3840

5/32″ × 3/16″ × 9/16″ × 2″ 4 Flute Square End Carbide End Mill-Plain Shank

Item #: YG33UGMF89010
Brand: YG-1 Cutting Tools
Model #: UGMF89010

7/16″ × 7/16″ × 1″ × 2 3/4″ 4 Flute Square End Carbide End Mill-Plain Shank

Item #: YG33UGMF89028
Brand: YG-1 Cutting Tools
Model #: UGMF89028

7/16″ × 7/16″ × 1″ × 2 3/4″ 4 Flute Square End Carbide End Mill-Plain Shank - YG Tylon F

Item #: YG3307588TF
Brand: YG-1 Cutting Tools
Model #: 07588TF

Proto® Sub Set J99835

Item #: KP4280330
Manufacturer: Proto
Mfg #: J99835

Technical Specifications:
•Brand Name: Proto •Drive: 1/4, 3/8 & 1/2 •Model Number: J99835

Description:
•190 pieces •Contains a wide variety of tools to help you attack almost any mechanical task •Use to build a custom master set

Shipping Info:
•Actual Weight - 110.5000 •Dimensions - Height: 13.0 Length: 30.0 Width: 20.0 •Addl Fee Over 70lb-$23.00 per item

#3814 - Analog Rockwell Hardness Tester with Accessories

Item #: MV7067754
Manufacturer: Starrett
Mfg #: 67754

Technical Specifications:
•Brand Name: Starrett •Depth of Throat: 6.6 •Initial Range Load: 10 •Length: 20 •Load Range (kgf): 60, 100, 150 •Maximum Load (kgf): 150 •Model Number: 3814 •Overall Height: 30 •Results Display: Analog - Dial Gage •Test Force Application: Dead weight applies test force •Test Force Control: Hydraulic dashpot system •Test Height: 6.69 •Type: Analog Rockwell Hardness Tester with Accessories •Unit Dimensions: 30 x 8.5 x 20 (762 x 216 x 508mm) •Weight: 187 lbs •Width: 8.5

Description:
Features: •Ability to handle Rockwell Scales A through H and K •Stable cast iron construction •Ideal basic hardness testing for many typical applications •Test force control - hydraulic dashpot system •Results display - analog - dial gage •30"H x 8.5"W x 20"D Technical Specifications: •Minor load - 10Kgf •Major load - A:60Kgf, B:100Kgf, C:150Kgf •Test force application - (Dead weight applies test force) •Throat depth - 6.6" (168mm) •Maximum test height - 6.69" (169.9mm) •Unit weight - 187 lbs (85kg)

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 226.0000

Diamond-Plate SpongeCote 5' x 75' Black/Yellow Work Mat

Item #: RV6061691
Manufacturer: Wearwell
Mfg #: 415.916X5X

Technical Specifications:
•Brand Name: Wearwell •Coating / Surface: PVC Surface / Nitricell Spongebase •Color: Black/Yellow •Size: 5 x 75 •Thickness: 9/16 •Type: Floor Mat

Description:
•Diamond-Plate SpongeCote ® revolutionized the anti-fatigue market. •Super resilient, Nitricell ® sponge base enhances employee productivity and relieves fatigue like no other. •9/16" overall with optional colored borders and beveled safety edges. •3 Year Warranty •GREEN RATING> 50% Post industrial

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 413.0000

TDMX260R5SL32M DRL BODY

Item #: WK536572145
Brand: Widia
Model #: 6572145

D-500-90-3CT-402 - Lead Angle Large Rough Head

Item #: TE106390245
Manufacturer: Techniks
Mfg #: 6390245

Technical Specifications:
•Brand Name: Techniks •Calibrated Vernier Dial: Adjustable in 0.0001" increments •Head Diameter: 352mm •Head Pilot Diameter mm: 60 •Head Pilot Diameter Inch: 2.362 •Insert Type: CCMT 43_ •Minimum Bore Diameter: 14.567 •Projection Length mm: 90 •Projection Length Inch: 3.54 •Screw: TE106811266 •Tool Position (Vertical): Vertical or Horizontal

Description:
•Techniks 90 degree Lead Angle Large Rough Head •Two AccuSET 0.0001" graduated dials allow setting both inserts simultaneously •Top quality steel alloy hardened to 58-60 HRc •Precision ground components for greater accuracy •Use 90 degree lead angle heads when performing blind boring, or if the desired hole is not exactly on center with your pilot hole •Use large boring heads with direct mount tool holders or ADT 100-50 adapter and a toolholder with a 100mm connection

Shipping Info:
•Actual Weight - 37.3000

D500-75-3 CNMG - Lead Angle Large Rough Head

Item #: TE106275250
Manufacturer: Techniks
Mfg #: 6275250

Technical Specifications:
•Brand Name: Techniks •Calibrated Vernier Dial: Adjustable in 0.0001" increments •Head Diameter: 352mm •Head Pilot Diameter mm: 60 •Head Pilot Diameter Inch: 2.362 •Insert Type: CNMG 43_ •Minimum Bore Diameter: 14.567 •Projection Length mm: 90 •Projection Length Inch: 3.54 •Screw: TE106811270 •Tool Position (Vertical): Vertical or Horizontal

Description:
•Techniks 75 degree Lead Angle Large Rough Head •Two AccuSET 0.0001" graduated dials allow setting both inserts simultaneously •Top quality steel alloy hardened to 58-60 HRc •Precision ground components for accuracy •75 degree lead angle heads tend to self center in the pilot hole, stabilizing the cut and maximizing stock removal rates

Shipping Info:
•Actual Weight - 1.0000

D-500-90-3CT-300 - Lead Angle Large Rough Head

Item #: TE106390240
Manufacturer: Techniks
Mfg #: 6390240

Technical Specifications:
•Brand Name: Techniks •Calibrated Vernier Dial: Adjustable in 0.0001" increments •Head Diameter: 352mm •Head Pilot Diameter mm: 60 •Head Pilot Diameter Inch: 2.362 •Insert Type: TCMT 32.5_ •Minimum Bore Diameter: 14.567 •Projection Length mm: 90 •Projection Length Inch: 3.54 •Screw: TE106811262 •Tool Position (Vertical): Vertical or Horizontal

Description:
•Techniks 90 degree Lead Angle Large Rough Head •Two AccuSET 0.0001" graduated dials allow setting both inserts simultaneously •Top quality steel alloy hardened to 58-60 HRc •Precision ground components for greater accuracy •Use 90 degree lead angle heads when performing blind boring, or if the desired hole is not exactly on center with your pilot hole •Use large boring heads with direct mount tool holders or ADT 100-50 adapter and a toolholder with a 100mm connection

Shipping Info:
•Actual Weight - 1.0000

D-500-75-3 CCMT - Lead Angle Large Rough Head

Item #: TE106275245
Manufacturer: Techniks
Mfg #: 6275245

Technical Specifications:
•Brand Name: Techniks •Calibrated Vernier Dial: Adjustable in 0.0001" increments •Head Diameter: 352mm •Head Pilot Diameter mm: 60 •Head Pilot Diameter Inch: 2.362 •Insert Type: CCMT 43_ •Minimum Bore Diameter: 14.567 •Projection Length mm: 90 •Projection Length Inch: 3.54 •Screw: TE106811266 •Tool Position (Vertical): Vertical or Horizontal

Description:
•Techniks 75 degree Lead Angle Large Rough Head •Two AccuSET 0.0001" graduated dials allow setting both inserts simultaneously •Top quality steel alloy hardened to 58-60 HRc •Precision ground components for accuracy •75 degree lead angle heads tend to self center in the pilot hole, stabilizing the cut and maximizing stock removal rates

Shipping Info:
•Actual Weight - 1.0000

PUNCHER-MAX 7/8DIA X 3/8THK

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

673MXZ BENCH MICROMETER

Item #: MV7067192
Manufacturer: Starrett
Mfg #: 67192

Technical Specifications:
•Brand Name: Starrett •Model Number: 673MXZ

Description:


Shipping Info:
•Actual Weight - 32.7000

#VB888CIM - 8 x 8 x 8''- V-Block & Clamp Set

Item #: NJ50VB888CIM
Manufacturer: Suburban
Mfg #: VB888CIM

Technical Specifications:
•Brand Name: Suburban •Capacity: 6-3/8 •Model Number: VB888CIM •Number of Blocks: 1 •Size: 8 x 8 x 8 •Squareness: .0005 •Type: V-Block & Clamp Set

Description:
•Made from close grain cast iron •All have 90° Vee's •Ground square, parallel and central within 0.0005" •Drilled and tapped on the top face, and supplied with one clamp and two clamp screws, per block •Type B With Clamps

Shipping Info:
•Actual Weight - 96.0000 •Dimensions - Height: 13.0 Length: 13.0 Width: 13.0

36 x 48" - Grade B 2-Ledge 6'' Thick - Granite Surface Plate

Item #: NS6080717
Manufacturer: Starrett
Mfg #: 80717

Technical Specifications:
•Brand Name: Starrett •Grade: B - Toolroom •Ledge: Two Ledge •Length: 48 •Size: 36 x 48 •Thickness: 6 •Tolerance: .0005 •Type: Granite Surface Plate •Weight: 955 lbs •Width: 36

Description:
•Crystal Pink Granite Surface Plates •Grade B - Toolroom Grade: This is typically specified for production checking work throughout the shop. •Unilateral Flatness Tolerance Overall flatness tolerance is based on unilateral measurement. •All points on the work surface shall be contained between two parallel planes separated at a distance no greater than the amount specified for each particular grade and size. •Meets or exceeds U.S. Federal Specification GGG-P-463C for flatness •Smooth, jewel-like quartz bearing points protect accuracy and finish of both the surface and the tools used on it

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 955.0000

36 x 60" - Grade B 2-Ledge 8'' Thick - Granite Surface Plate

Item #: NS6080726
Manufacturer: Starrett
Mfg #: 80726

Technical Specifications:
•Brand Name: Starrett •Grade: B - Toolroom •Ledge: Two Ledge •Length: 60 •Size: 36 x 60 •Thickness: 8 •Tolerance: .0007 •Type: Granite Surface Plate •Weight: 1560 lbs •Width: 36

Description:
•Crystal Pink Granite Surface Plates •Grade B - Toolroom Grade: This is typically specified for production checking work throughout the shop. •Unilateral Flatness Tolerance Overall flatness tolerance is based on unilateral measurement. •All points on the work surface shall be contained between two parallel planes separated at a distance no greater than the amount specified for each particular grade and size. •Meets or exceeds U.S. Federal Specification GGG-P-463C for flatness •Smooth, jewel-like quartz bearing points protect accuracy and finish of both the surface and the tools used on it

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1560.0000

0-2000MM VERNIER CALIPER

Item #: MT80160-113
Manufacturer: Mitutoyo
Mfg #: 160-113

Technical Specifications:
•Brand Name: Mitutoyo •Model Number: 160-113

Description:


Shipping Info:
•Actual Weight - 30.0000

#52-255-900 - 6 - 8" - .00025'' Graduation - XT Holematic Bore Gage Set

Item #: NA5552255900
Manufacturer: Fowler
Mfg #: 52-255-900

Technical Specifications:
•Brand Name: Fowler •Graduation: .00025 •Includes: 2 heads, 1 handle, 1 ring •Model Number: 52-255-900 •Total Range: 6 - 8" •Type: XT Holematic Bore Gage Set

Description:
•3-Pt contact with tungsten carbide measuring anvils above .5" •Blind bore measuring above .5" •Ratchet stop for consistent measuring •Non-removeable anvils •Extensions available for deep measuring •Heads with special anvils available for threads, splines, slots, etc. •Setting rings included •Includes UKAS certificates for all holemikes and setting rings •Every gage is individually serialized •Special anvils available

Shipping Info:
•Actual Weight - 15.0000