Bessey Heater -- Model #SC110V; 110V

Item #: SG75SC110V
Manufacturer: Bessey
Mfg #: SC 110V

Technical Specifications:
•Brand Name: Bessey •Maximum Bearing OD: 11 •Maximum Bearing Width: 4-3/8 •Standard Cross Bars: 3/4, 2 •Voltage: 110V •Weight: 52 lbs

Description:
•The Reco Induction Bearing Heater is a fast, clean, safe and efficient way of installing bearings, gears sprockets, couplings & sleeves •Bearings can quickly be brought to proper heat in three minutes with no danger of damage to the bearing and shaft •Eliminates crude methods of applying heat to bearings, such as open flames & torches which can lead to unequal expansion and the loss of bearing temper •Hot oil & forge methods are unsafe, messy & create a contamination problem on precision bearing surfaces and shortens the bearing s life-span.

Shipping Info:
•Actual Weight - 52.0000

Apex 6500 Synthetic Coolant - 55 Gallon

Item #: LK70A650055
Manufacturer: Ashburn
Mfg #: A-6500-55

Technical Specifications:
•Brand Name: Ashburn •Hazard Code: HAZ06 •Size: 55 Gallon

Description:
•Increased Lubricity vs Conventional Synthetic Coolants •Superior Rust and Corrosion Protection •Very Low Carry-Off Reduces Coolant Consumption •Works well on Ferrous and Nonferrous Metals •A high lubricity, heavy duty synthetic coolant. It is fortified with a special blend of high viscosity index polymer lubricants. These polymers remain soluble in water until activated by the heat of friction during machining and grinding. This results in a coolant with excellent lubricity at the tool/chip interface, yet with very little carryoff on parts.

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 540.0000 •Dimensions - Height: 34.9 Length: 23.0 Width: 23.0

Horizontal Sheet Rack 5-Shelf 2K lb Cap

Item #: RV54SHEETR57
Brand: Vestil
Model #: SHEET-R-57

150'X1″ .035 5/8S M42 POWERBAND

Item #: FX8399297150
Brand: Starrett
Model #: ‎99297-150

#25725 - 1/2" Kopal Mono Bloc Start Up Clamp

Item #: SG7025725
Manufacturer: Mitee-Bite
Mfg #: 25725

Technical Specifications:
*Brand Name: Mitee-Bite

Description:
*Kopal¨ Mono Bloc Clamps *Quick and easy way to clamp parts on a Bridgeport style mill *Worm gear and design ensures the clamps will not loosen with use yet the clamps are easy to set up and break down *Ideal for shor tcyclte times and odd shaped parts *Modular design also allows adjusting clamping height by stacking the riser blocks and the use of an extension arm increases reach

Shipping Info:
*Actual Weight - 13.0000

#4297-1 - With 3MT - 500 - 250 RPM - Electromagnetic Drill

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Type 150 Power Feed - X-Axis

Item #: JD80M9109150
Manufacturer: Servo
Mfg #: M-9109-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Birmingham 942, 1050, Kent 2S •Model Number: M-9109-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.0000

7'' STRK STEEL 5T RATCHET

Item #: KL71RJ84A
Manufacturer: Simplex
Mfg #: RJ84A

Technical Specifications:
•Brand Name: Simplex •Closed Height: 14 •Lift Range: 5 ton •Model Number: RJ84A •Stroke (in): 7 •Weight: 30.6 lbs

Description:
•Multiple-tooth pawls for strength & safety •Large base ensures a firm foundation •Plated springs to resist corrosion •Double-lever sockets for jacking in close quarters

Shipping Info:
•Actual Weight - 30.6000 •Addl Fee Under 70lb -$14.25 per item

Table Power Feed - 150 inch/lbs; For All Purpose

Item #: JD80M2500150
Manufacturer: Servo
Mfg #: M-2500-150

Technical Specifications:
•Brand Name: Servo •Description: X, Y & Z Axis Powerfeed •For Use With: General Purpose •Model Number: M-2500-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 12.6500 •Dimensions - Height: 14.8 Length: 12.3 Width: 7.30

Coolubricator JR - 1 outlet MQL Applicator, Manual On/Off, with BAT Nozzle

Item #: UN10J1EM16153S3
Manufacturer: Unist
Mfg #: CJ1EMAN161

Technical Specifications:
•Brand Name: Unist •Description: Manual •Includes: 3" Bat Nozzle •Line Length: 15' •Line Material: Coaxial Polyurethane •Number of Outlets: 1 •Style: Magnet •Tank Capacity: 16 oz •Type: None

Description:
•Single-outlet portable Minimum Quantity Lubrication Solution (MQL) for sawing operations •Continuous precision output •Reduces fluid use and increased tool life •Reliable Unist pump •Seperate air and fluid control •Use Coolube lubricant for lifetime warranty on pump

Shipping Info:
•Actual Weight - 3.0000

5" Round Rare Earth Magnetic Chuck Standard Pole

Item #: HM50MRRE13
Manufacturer: Suburban
Mfg #: MRRE-13

Technical Specifications:
*Bolt Center Distance: 4.41 *Bolt Size: (3) M6 *Brand Name: Suburban *Height: 1.93 *Pole: Standard *Pole Spacing: .08 *Shape: Round *Size: 5 *Weight: 14 lbs

Description:
*Round Rare Earth Magnetics Chuck *Features: *Made with neodymium iron boron tupe rare earth magnets for exceptonal holding power *80 N/cm2 (116 psi) nominal holding power *Standard Pole: *Suitable for grinding & light milling *Works best for holding medium-sized workpieces *Has 4mm steel poles & 2mm brass spacers

Shipping Info:
*Actual Weight - 14.0000 *Dimensions - Height: 5.00 Length: 9.00 Width: 9.00

Type 140 Power Feed - X-Axis

Item #: JD80M9130140
Manufacturer: Servo
Mfg #: M-9130-140

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Clausing Atlas / Kalamazoo •Model Number: M-9130-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.0000

Model SST2HB 3M™ Aqua-Pure™ Whole House5592010 Alt Mfg # 60303

Item #: KB3560303
Brand: 3M
Model #: 00016145603037

0-1" / 25mm Range - .0005" / .01mm Resolution - Fowler Mark VI Electronic Indicator

Item #: NA5554530145
Manufacturer: Fowler
Mfg #: 54-530-145

Technical Specifications:
•Accuracy: .0004" / 0.01mm •Brand Name: Fowler •Comments: Standard •Indicator Style: Lug back •Model Number: 54-530-145 •Resolution: .0005" / 0.01mm •Total Range: 0 - 1" / 0 - 25.4mm

Description:
•Robust construction •Water and coolant resistant •Protection class IP-67*Requires rubber boot accessory •Battery life: 10,000 hours of operation •New technology with customizable menus •Wide range of functions (MIN/MAX/DELTA, TOL, Factor, Preset, Auto Off, etc) •Aluminum housing •Bezel rotated 270° •Large display with LED indicators •Lug back •Lifetime warranty

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - .5500 •Dimensions - Height: 2.70 Length: 7.00 Width: 3.50 •Additional handling -$15.00 per item

‎2700-801 INDICATOR

Item #: MV7072759
Brand: Starrett
Model #: 72759

Miller Turbo T-BAK with a 17D-1 steel twist-lock carabiner

Item #: LF50MFLT275FT
Manufacturer: Miller by Honeywell
Mfg #: MFLT-2/7.5

Technical Specifications:
•Brand Name: Miller by Honeywell •Lanyard Connector: 5K Locking Snap Hook •Length: 7.5' •Material: Polyester Webbing •Type: Fall Limiter •Unit Connector: Carabiner

Description:
•7.5 foot (2.3m) working capacity •User-Rated to 400-lbs. (181kg) capacity •Cost-effective alternative to tie-back shock-absorbing lanyards. •All-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site. •Designed for anchoring below a user's harness back D-ring for greater safety. •Integrated shock absorber especially designed for tie-back applications with load indicator device. •Meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24-inches (.62m) or less of lifeline extends out of the housing when the unit is fully retracted. •The new patent-pending Miller Twin Turbo™ D-Ring connector easily adapts two Miller Turbo T-BAK PFLs for continuous 100% tie-off fall protection.

Shipping Info:
•Actual Weight - 3.2000

10 Gallon Pump And Tank System

Item #: LC5510IMV
Manufacturer: Graymills
Mfg #: 10-IMVE

Technical Specifications:
•Brand Name: Graymills •Flow: 10 GPM •Horse Power: 1/8 •Includes: Pump •Model Number: 10IMV •Tank Capacity: 10 Gallon •Type: Pump

Description:
•10 Gallon Pumpand Tank System •1/8 HP cast iron pump •10 gallon per minute flow rate •16 gauge steel tank with removable lid •Screen bowl, chip collector •115/230V, 60Hz, 1Ph •500 SSU maximum viscosity •Tank: 24"L x 10"W x 11"H •Optional Accessory Kit Includes 5' Flexible Hose and Nozzle with Flow Control Valve Order No. LC55-C36429 37.00

Shipping Info:
•Actual Weight - 35.7000 •Shipping Weight - 52.0000 •Dimensions - Height: 11.5 Length: 26.4 Width: 22.8

3-1/2-12 Carbon Steel Special Thread Hexagon Die

Item #: ER6452012
Manufacturer: ProCut
Mfg #:

Technical Specifications:
•Brand Name: ProCut •Die Thread Size: 3-1/2-12 •Material: Carbon Steel •Pitch: 12 •Size: 3-1/2 •Style: Right Hand

Description:
•Special thread hexagon rethreading dies

Shipping Info:
•Actual Weight - 4.8000 •Dimensions - Height: 2.50 Length: 6.40 Width: 5.30

High Speed Production Air Vise - 3-1/8" Jaw Width

Item #: JC5033
Manufacturer: Heinrich
Mfg #: 33-ASSEMBL

Technical Specifications:
*Brand Name: Heinrich *Jaw Depth of Bars: 1-1/4 *Jaw Opening: 3 *Jaw Width: 3-1/8 *Size: 3 *Type: High Speed Production Air Vise *Weight: 20 lbs

Description:
*High Speed Production Air Vise *Holding Power 15x air pressure (1500 lbs. at 100 psi) *Hands-free operation of vise *Pressure regulator may be controlled to suit operators, accommodate jig and fixture components *Furnished with foot pedal valve, fittings and necessary hoses *Hollow base for clear drilling *Quick positioning of jaw at any point within jaw opening *V-block attachment available

Shipping Info:
*Actual Weight - 19.7000 *Dimensions - Height: 9.70 Length: 11.5 Width: 9.40

5455 POLISHER MILWAUKEE

Item #: PD505455
Brand: Milwaukee
Model #: 5455