BES Up To 2022 $250-$5000 Products - (25001 Products)
Precision Turrent Bearing 19.125″
Item #: RV54PTB19
Brand: Vestil
Model #: PTB-19
| Product Specifications | |
|---|---|
| Type | Heavy Duty Precision Turret Bearings |
| Capacity | 6,000 lbs |
| Top Material | Stainless Steel |
| Material | Stainless Steel |
| Width | 19-1/8″ |
| Base Color | Silver |
| Depth | 19-1/8″ |
| Top Color | Silver |
| Height | 2-1/4″ |
| Weight | 98 lbs |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Guardian tempering valve blends hot and cold water to deliver tepid water. Flow capacity is 3.0 to 34 GPM, for use with a single emergency shower, or multiple eyewash, eye/face wash, eyewash/drench hose or drench hose units.
Item #: KB56G3700LF
Manufacturer: Guardian
Mfg #: G3700LF
Technical Specifications:
•Brand Name: Guardian
•Size: 17 x 13 x 10"
•Tank Capacity: 34 Gallon
Description:
•Temperature Control: Valve has bimetallic thermostat that senses incoming water temperature and automatically blends water to 85°F (29°C). High temperature limit stop is set to 90°F (32°C). Valve has dial thermometer on outlet to monitor temperature of delivered water. Note: Valve may need to be adjusted when installed based on incoming water temperature. Refer to "Installation Instructions" for further information.
•Fail Safe: In event of restriction or failure of hot water supply, internal bypass allows valve to deliver cold water to emergency unit. In bypass mode, valve will deliver 20 GPM of cold water at 30 PSI flow pressure. In event of loss of cold water supply, valve will close to prevent scalding and not deliver water.
•Supply Requirements: Minimum recommended hot water supply temperature is 120°F (49°C). Note: Extremely cold climates may require a hot water supply temperature greater than 120°F (49°C). 30 PSI minimum supply pressure is required for proper valve operation. Maximum supply pressure is 125 PSI. Maximum hot to cold water pressure differential is 5%.
•Mounting: Furnished with heavy duty mounting bracket for securing valve to panel or wall.
•Inlets/Outlet: 1" NPT female hot and cold water inlets with 1-1/4" NPT female outlet. Inlets can be rotated 360 degrees for top or bottom supply. Each inlet has integral water strainer, check valve and supply stop.
•Quality Assurance: Valve is completely assembled and water tested prior to shipment. Valve is certified to ASSE 1071. Valve is certified to meet low lead requirements of wetted surface area less than 0.25% lead by weight.
Shipping Info:
•Actual Weight - 17.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Automatic Cyclic Pump - PE-2402
Item #: NW50PE2402
Manufacturer: Trico
Mfg #: PE-2402
Technical Specifications:
•Brand Name: Trico
•Interval Between Cycles: 0 - 180 min
•Low Level Alarm / Gauge: Yes
•Low Level Switch: Yes
•Min Output (cc/hr): 1.1
•Model No.: PE-2402-15
•Output per Stroke (cc): 3.33 cc/sec
•Reservoir Capacity: 2 Liters
Description:
•The PE-20 series pumps are designed for automatic cyclic systems with fewer than 50 points.
•Adjustable interval time between lubrication cycles of 0-60 minutes
•Heavy duty plastic reservoir simplifies oil level viewing
•Low level switch with alarm Pressure gauge
Shipping Info:
•Actual Weight - 5.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#MV14CTR -- Stage Centers - Optical Comparator Accessory
Item #: MS55MV14CTR
Manufacturer: Suburban
Mfg #: MV14CTR
Technical Specifications:
•Brand Name: Suburban
•Description: Stage Centers
•Model Number: MV14CTR
•Type: Optical Comparator Accessory
Description:
•Master-View Basic MV-14 all the standard features of the Master-View line plus LCD digital scales on the X and Y axis providing 0.0005 reading. Master-View II with Quadra-Check® 200 series readout Standard features plus Quadra-Check® 200 series readout and Acu-Rite® glass scales, 0.0001 reading on X and Y scales
•Four models are available. MV-14-Q with Quadra-Check® 200 series readout MV-14-QR Series 200 readout plus digital protractor MV-14-QE Series 200 readout plus fiber optic edge detection MV-14-QRE Series 200 readout with both digital protractor and fiber optic edge detection
Shipping Info:
•Actual Weight - 10.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tapping Head -#70X-3JT; #10 - 5/8" Cap
Item #: GJ5010703
Manufacturer: Tapmatic
Mfg #: 10703
Technical Specifications:
*Brand Name: Tapmatic
*Capacity in 1010 Mild Steel: #10 - 5/8" (M5 - M16)
*Collet Style/Fits: 24000
*Maximum RPM: 1200
*Model Number: 70X-3JT
*Mount: 3JT
*Self Feed: .375
*Type: Tapping Head
Description:
Shipping Info:
*Actual Weight - 5.8000
*Dimensions - Height: 4.50 Length: 8.00 Width: 4.25
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CIMTECH® 100 Blue - 55 Gallon
Item #: LL5100943D
Manufacturer: Cimcool
Mfg #: 00943-D
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ06
•Size: 55 Gallon
Description:
Shipping Info:
•HAZ 06
•UPS Ground - Commercial TruckOnly, Call for Charges
•UPS Air - Commercial Truck Only, Call for Charges
•Commercial Truck - CommercialTruck Only, Call for Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 517.9000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12" 4 Jaw Independent Chuck; Flatback
Item #: HK154124R
Manufacturer: BTC
Mfg #: 4124R
Technical Specifications:
*Body Width: 3.543
*Brand Name: BTC
*Chuck Diameter: 12.598
*Chuck Size: 12
*Chuck Style: Four Jaw Independent Chuck
*Class: Lathe Chucks & Accessories
*Description: Semi Steel Body
*Hole Size: 3.740
*Model Number: 4124R
*Mount: Plain Back
*Mount Recess: 5.512
*Mount Recess Depth: .236
*Mounting Bolt Radius: 6.496
*Number of Jaws: 4
*Size of Mounting Bolts: M16
*Total Width: 5.276
*Type: 4 Jaw Independent (Top Reversible)
*Weight: 100 lbs
Description:
*4-Jaw Independent Chuck
*These chucks have jaws that are operated individually to allow solid gripping of oddly shaped work pieces. Semi-steel body
*One piece solid reversible jaws or top reversible jaws
*T-Wrench
*Mounting screws
*T- Slots in 12" and larger
Shipping Info:
*Actual Weight - 100.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15.8″ × 12.1″ × 3.4″ 110V/60Hz Table Top Demagnetizer
Item #: MP035020
Brand: Magnetic Products
Model #: TTD-5
| Product Specifications | |
|---|---|
| Type | Tabletop |
| Height | 3.43″ |
| Length | 7.1″ |
| Voltage | 110 V |
| Width | 9.8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#HH12-AF-Kit - Hardy 12" Kit - Hawkeye Precision Borescope
Item #: MS4680812
Manufacturer: Hawkeye
Mfg #: HH12-AF-KI
Technical Specifications:
•Brand Name: Hawkeye
•Description: Hardy 12" Kit
•Type: Precision Borescope
Description:
•See the places you always needed to see but couldn't see inside of pipes, tubes, valves, meters, bores, cross-holes, castings and injection molds
•Magnification of up to 25 times or more - portable and ready to use, built-in light source -bright clear images, straight-on or 90° view
•Hawkeye Precision Borescope Kit Includes: Hawkeye Precision Borescope, Hawkeye SideWays 90° adapter Mini-Maglite® flashlight with batteries, keyed aluminum & ABS carrying case
Shipping Info:
•Actual Weight - 6.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 440SS Locker Cabinet - 4 Drawer, Red
Item #: KP4293660
Manufacturer: Proto
Mfg #: J441558-4R
Technical Specifications:
•Brand Name: Proto
•Model Number: J441558-4RD-LK
Description:
•Cubic inch capacity is 13,090
•Maximum weight capacity for each drawer is 100 lbs
•100% full extension drawers
•100 lbs ball bearing slides
•Heavy-duty key
•Smooth, sleek and durable paint finish
Shipping Info:
•Actual Weight - 115.0000
•Dimensions - Height: 62.0 Length: 22.0 Width: 18.7
•Addl Fee Over 70lb-$23.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12" 4 Jaw Independent Chuck; D1-8; Direct Mount
Item #: HK154124D8
Manufacturer: BTC
Mfg #: 4124D8
Technical Specifications:
*Body Width: 3.543
*Brand Name: BTC
*Chuck Diameter: 12.598
*Chuck Size: 12
*Chuck Style: Direct Mount Type "D" Independent Chuck
*Class: Lathe Chucks & Accessories
*Description: Semi Steel Body
*Hole Size: 3.740
*Model Number: 4124D8
*Mount: D1-8
*Mount Recess: 5.500
*Mount Recess Depth: .709
*Mounting Bolt Radius: 6.748
*Number of Jaws: 4
*Size of Threaded Cam Studs: M20 x 1.5
*Taper Depth: .551
*Total Width: 5.276
*Type: 4 Jaw Independent Direct Mount - Type D (Solid)
*Weight: 100 lbs
Description:
*4-Jaw Independent Chuck Direct Moount Type D
*Chucks have jaws that are operated individually to allow solid gripping of oddly shaped work pieces
*Semi-Steel or Steel Body Style
*One piece solid reversible jaws or top reversible jaws
*T-Wrench
*Mounting screws
*T- Slots in 12" and larger
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 100.0000
*Dimensions - Height: 8.00 Length: 15.0 Width: 15.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DRO203 3-Axis Mill/Turn/ Grind Readout
Item #: HC02119725001
Manufacturer: Acu-Rite
Mfg #: 1197250-01
Technical Specifications:
•Application: Milling, Turning, Grinding
•Axis: 3
•Brand Name: Acu-Rite
•Description: For Milling, Turning, Grinding Applications
•Model Number: 1197250-01
•Series: 203
•Type: Digital Readout System
Description:
•DRO203
•7" TFT Color Display
•USB Type C Data Interface
•Job Clock
•Feed Rate Display
•Multiple Language Supports
•Absolute/Incremental
•Graphic Pos aid for Near Zero Warning with Graphics
•Help Function
•16 Tool Offsets / Diameter
•Preset and Zero Reset
•4 Function Calculator / Trig Calculator / RPM
•Instance inc/mm Conversion
•Position-TracTM (Recalls last data after power loss) / RM
•Multiple Datums
•Scale Factor (Allows for part shrinkage / expansion)
•Counter Diagnostics
•Encoder Input Linear or Rotary
•Linear / Non-Linear Compensation up to ±9,999 ppm
•Backlash Compensation
Shipping Info:
•Actual Weight - 6.0000
•Dimensions - Height: 5.50 Length: 15.0 Width: 11.5
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DIGIMATIC MICROMETER SETS/3PCS W/
Item #: MT80293-960-30
Brand: Mitutoyo
Model #: 293-960-30
| Product Specifications | |
|---|---|
| Type | Micrometer Inspection Set |
| Resolution | 0.00005″ / 0.001 mm |
| Measuring Range | 0″-3″ / 0 mm-76.2 mm |
| Water Resistance Rating | IP65 |
| Battery Type | SR44 |
| Model No | 293-960-30 |
| Number of Pieces | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#ECB050 - 1100 Lb Magvise
Item #: TE10ECB050
Manufacturer: Techniks
Mfg #: ECB-050
Technical Specifications:
*: .47
*Base Height: 3
*Base Size: 5 x 3
*Base Width: 3
*Brand Name: Techniks
*Clamp Force: 15 lbs
*Key Slot Width: .47
*Mininum Stock Thickness: .40
*Model Number: ECB-050
*Overall Dimension (LxWxH): 5 x 3 x 3
*Overall Height: 3
*Ship Weight: 15 lbs
*Type: Rare Earth Magnetic Vise
*Vise Body Width: 3
*Vise Height: 3
*Vise Length: 5
*Weight: 15 lbs
Description:
*Use induction blocks at all times to prevent damage to the face of the magnetic vise
*Easily integrate with pallet changing and tombstone systems
*Four sizes available to fit your application needs
*Each vise includes two machinable induction blocks, wrench, extension and socket, switch-connect socket assembly, two stop plates, four toe clamps
*Daisy-chainable for easier use
Shipping Info:
*Actual Weight - 15.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Procunier High Speed Tapper -- #2E1MT; 1MT Shank
Item #: GH5012001
Manufacturer: Procunier
Mfg #: 12001
Technical Specifications:
*Brand Name: Procunier
*Capacity in Aluminum: #6 - 1/2, M4-M12, 1/8 Pipe
*Capacity in 1010 Mild Steel: #6 - 5/16, M4-M8
*Collet Style/Fits: 2E
*Maximum RPM: 2000
*Model Number: 2E1MT
*Shank Size: 1MT
*Type: High Speed Tapper
Description:
*High Speed Tapper
*Balanced, heat-treated gear reversing mechanism minimizes strain and wear.
*Reverses at twice forward speed to increase productivity and avoid tap jamming.
*Extremely sensitive friction clutch engages conical surfaces of drive and reverse shells with smooth, "cushioned" action, allowing sensitive operator "feel."
*Assure automatic tap protection.
*One-piece TRU-GRIP spindle assures true alignment
*Can be modified to be used in horizontal position
*Factory can easily alter any model for left-hand tapping
*Collets not included"order separately below
Shipping Info:
*Actual Weight - 7.2340
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Procunier High Speed Tapper -- #2E2MT; 2MT Shank
Item #: GH5012002
Manufacturer: Procunier
Mfg #: 12002
Technical Specifications:
*Brand Name: Procunier
*Capacity in Aluminum: #6 - 1/2, M4-M12, 1/8 Pipe
*Capacity in 1010 Mild Steel: #6 - 5/16, M4-M8
*Collet Style/Fits: 2E
*Maximum RPM: 2000
*Model Number: 2E2MT
*Shank Size: 2MT
*Type: High Speed Tapper
Description:
*High Speed Tapper
*Balanced, heat-treated gear reversing mechanism minimizes strain and wear.
*Reverses at twice forward speed to increase productivity and avoid tap jamming.
*Extremely sensitive friction clutch engages conical surfaces of drive and reverse shells with smooth, "cushioned" action, allowing sensitive operator "feel."
*Assure automatic tap protection.
*One-piece TRU-GRIP spindle assures true alignment
*Can be modified to be used in horizontal position
*Factory can easily alter any model for left-hand tapping
*Collets not included"order separately below
Shipping Info:
*Actual Weight - 7.6500
*Dimensions - Height: 5.00 Length: 12.4 Width: 4.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10" 3 Jaw Self Centering Scroll Chuck; A1-6
Item #: HK156103A6R
Manufacturer: BTC
Mfg #: 6103A6R
Technical Specifications:
*Body Width: 3.661
*Brand Name: BTC
*Chuck Diameter: 9.843
*Chuck Size: 10
*Chuck Style: Direct Mount Type "A" Independent Chuck
*Class: Lathe Chucks & Accessories
*Description: Semi Steel Body
*Drive Button Depth: .256
*Drive Button Diameter: .768
*Hole Size: 2.165
*Model Number: 6103A6R
*Mount: A1-6
*Mount Recess: 4.188
*Mount Recess Depth: .625
*Mounting Bolt Radius: 3.252
*Number of Jaws: 3
*Size of Mounting Bolts: M12
*Spindle Diameter: 6.496
*Taper Depth: .512
*Type: 3 Jaw Self Centering Scroll - Type A (Top Reversible)
*Weight: 74 lbs
Description:
*3 Jaw Self Centering Scroll Chuck - Direct Mount Type A Top Reversible Jaw
*American standard two-piece tongue and groove jaws
*Scroll and jaws hardened and ground
*Top reversible jaws
*Semi-steel or steel body style
*Master jaws and top jaws
*T-wrench
*Mounting screws
*Although an A1 type spindle nose has both inner and outer tapped holes, Style A1 chucks utilize the inner holes, and will NOT fit on an A2 type spindle.
*Style A2 chucks use the outer tapped holes, and WILL fit on either A1 or A2 type spindles.
Shipping Info:
*Actual Weight - 74.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TPTN12U3.00B1.00R08 Face Mill
Item #: TG256730280
Manufacturer: Tungaloy
Mfg #: 6730280
Technical Specifications:
•Bore Diameter: 1.00
•Brand Name: Tungaloy
•Cutter Diameter: 3.00
•Depth of Cut: .433
•Description: TPTN12U3.00B1.00R08
•Handle: H-TB2W
•Height: 1.969
•Model Number: TPTN12U3.00B1.00R08
•Number of Inserts: 8
•Outer Diameter: 2.84
•Screw: CSPB-3.5
•Torx Key Blade: BLDI1P15/S7
•Trade Name: DoForce-Tri
•Uses Insert: TN_U 12 _ _
•Weight: 2.44
Description:
•Uses insert style TN_U 12 _ _
Shipping Info:
•Actual Weight - 2.8510
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
8" 4 Jaw Independent Chuck; D1-5; Direct Mount
Item #: HK154084D5
Manufacturer: BTC
Mfg #: 4084D5
Technical Specifications:
*Body Width: 2.953
*Brand Name: BTC
*Chuck Diameter: 7.874
*Chuck Size: 8
*Chuck Style: Direct Mount Type "D" Independent Chuck
*Class: Lathe Chucks & Accessories
*Description: Semi Steel Body
*Hole Size: 2.205
*Model Number: 4084D5
*Mount: D1-5
*Mount Recess: 3.250
*Mount Recess Depth: .591
*Mounting Bolt Radius: 4.126
*Number of Jaws: 4
*Size of Threaded Cam Studs: M12 x 1
*Taper Depth: .472
*Total Width: 4.213
*Type: 4 Jaw Independent Direct Mount - Type D (Solid)
*Weight: 36 lbs
Description:
*4-Jaw Independent Chuck Direct Moount Type D
*Chucks have jaws that are operated individually to allow solid gripping of oddly shaped work pieces
*Semi-Steel or Steel Body Style
*One piece solid reversible jaws or top reversible jaws
*T-Wrench
*Mounting screws
*T- Slots in 12" and larger
Shipping Info:
*Actual Weight - 36.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tapping Head - #6 - 1/2" Pipe 1/16; 1/8 Cap-33JT Mnt
Item #: GJ50015033
Manufacturer: Tapmatic
Mfg #: 015033
Technical Specifications:
*Brand Name: Tapmatic
*Capacity in 1010 Mild Steel: #6 - 1/2" (M3 - M12) Pipe 1/16, 1/8
*Collet Style/Fits: 22200
*Maximum RPM: 1500
*Model Number: RX50
*Mount: 33JT
*Self Feed: Min. .250 Max. .437
*Type: Tapping Head
Description:
*RX Series Tapping Head
*Self-Reversing Tapping Head for Drill Presses & Milling Machines
*Pre-selective torque drive prevents tap breakage
*Heavy duty ball clutch
*Accurate depth control
*Re-entry cushion eliminates cross threading
*Higher production rates
*Longer tap life
*For right hand tapping only
Shipping Info:
*Actual Weight - 4.9500
*Dimensions - Height: 3.60 Length: 8.50 Width: 4.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It