BES Up To 2022 $250-$5000 Products - (25001 Products)
3/4″ × 3/4″ × 3″ × 6″ RHS / RHC Solid Carbide 2-Flute Square End Single End General Purpose End Mill - Bright
Item #: BA10B51416
Brand: Bassett
Model #: B51416
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Length Group | Extra Long |
| Depth of Cut Maximum (APMX) | 3″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | MSE-2 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Single / Double End | Single End |
| Shank Type | Round |
| Center Cutting | Yes |
| End Shape | Corner Radius |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.03-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.03″ Corner Radius, End Mill
Item #: TP45VGM60167
Brand: OSG USA, Inc.
Model #: VGM6-0167
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.06-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.06″ Corner Radius, End Mill
Item #: TP45VGM60168
Brand: OSG USA, Inc.
Model #: VGM6-0168
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.09-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.09″ Corner Radius, End Mill
Item #: TP45VGM60169
Brand: OSG USA, Inc.
Model #: VGM6-0169
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.09″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.19-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.19″ Corner Radius, End Mill
Item #: TP45VGM60171
Brand: OSG USA, Inc.
Model #: VGM6-0171
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.19″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.12-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.12″ Corner Radius, End Mill
Item #: TP45VGM60170
Brand: OSG USA, Inc.
Model #: VGM6-0170
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.12″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
VGM6-010000CR0.25-S - 1″ Dia. × 1″ Shank × 1-1/2″ DOC × 4″ OAL, Carbide, EXO, 6 Flute, 0.25″ Corner Radius, End Mill
Item #: TP45VGM60172
Brand: OSG USA, Inc.
Model #: VGM6-0172
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Overall Length (OAL) | 4″ |
| Tool Type | End Mill |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | EXO |
| Series/List # | VGM6 |
| Flute Count (NOF) | 6 |
| Corner Radius (RE) / Chamfer Width (CHW) | 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MFMHV-201-16 16MM DIA 2-F
Item #: RJ41MFMHV20116
Brand: Robb Jack
Model #: MFMHV-201-16
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Flute Helix Angle (FHA) | 37 Degrees |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 22 mm |
| Usable Length (LU) | 40 mm |
| Overall Length (OAL) | 89 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MFMHV-201 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-301-20 0.625-IN DIA
Item #: RJ41FMHV30120
Brand: Robb Jack
Model #: FMHV-301-20
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 1-9/16″ |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.625″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | FMHV-301 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MFMHV-301-16 16MM DIA 3-F
Item #: RJ41MFMHV30116
Brand: Robb Jack
Model #: MFMHV-301-16
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Flute Helix Angle (FHA) | 37 Degrees |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 22 mm |
| Usable Length (LU) | 40 mm |
| Overall Length (OAL) | 89 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | Uncoated |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | MFMHV-301 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FMHV-201-20 0.625-IN DIA
Item #: RJ41FMHV20120
Brand: Robb Jack
Model #: FMHV-201-20
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 1-9/16″ |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.625″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | FMHV-201 |
| Flute Helix Angle (FHA) | 37 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 1″ × 2″ × 4″ RHS / RHC Solid Carbide 3-Flute Square End High-Performance End Mill for Steel and Stainless Steel - Bright
Item #: CE60C60396
Brand: Cleveland
Model #: C60396
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Corner Radius (RE) | 0.03″ |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Length Group | Regular |
| Overall Length (OAL) | 4″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | CEM-EMS-3 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
| Applicable Material | Stainless Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10162 25X2.0MM R TICN
Item #: DD1510162
Brand: M A Ford
Model #: 11198435C
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 40 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 102 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 2 mm |
| Coating | TiCN |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11110003 W/ALTIMA COATING
Item #: DD1511110003A
Brand: M A Ford
Model #: 11110003A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Shank Type | Straight |
| Overall Length (OAL) | 4″ |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.03″ |
| Coating | Altima |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10155 25X0.75MMR ALTIMA
Item #: DD1510155
Brand: M A Ford
Model #: 11198432A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 40 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 102 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.75 mm |
| Coating | Altima |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
77072 1X2-1/2X5 WELDON
Item #: DD1577072
Brand: M A Ford
Model #: 13810004W
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Count (NOF) | 3 |
| Depth of Cut Maximum (APMX) | 2-1/2″ |
| Flute Helix Angle (FHA) | 36 Degrees |
| Overall Length (OAL) | 5″ |
| Shank Type | Weldon Flat |
| Cutting Edge Material | Carbide |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10161 25X2.0MM R ALTIMA
Item #: DD1510161
Brand: M A Ford
Model #: 11198435A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 40 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 102 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 2 mm |
| Coating | Altima |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10163 25X2.5MM R ALTIMA
Item #: DD1510163
Brand: M A Ford
Model #: 11198436A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 40 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 102 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 2.5 mm |
| Coating | Altima |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 IN. EM .020 RAD TICN
Item #: DD1511110002C
Brand: M A Ford
Model #: 11110002C
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Shank Type | Straight |
| Overall Length (OAL) | 4″ |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.02″ |
| Coating | TiCN |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10154 25X0.5MM R TICN
Item #: DD1510154
Brand: M A Ford
Model #: 11198431C
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 40 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 102 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.5 mm |
| Coating | TiCN |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It