BES Up To 2022 $100-$250 Products - (25001 Products)
260838 SLEEVE
Item #: FF8650637
Manufacturer: Sandvik Coromant
Mfg #: 5757508
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - 1.7622
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 7/32 x 6 - Oil Hardening Flat Stock
Item #: LY4054067
Manufacturer: Starrett
Mfg #: 54067
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 7/32
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 6.7700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4 4FL SE LG 2 1/4X5
Item #: DC26215001083
Brand: MTC
Model #: 62699
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | Slotting | Profiling | Ramping |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 5″ |
| Length Group | Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | AlTiN |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 4 |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.4 mm Dia. × 14 mm Shank × 87 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773301
Brand: Nachi America Inc
Model #: 0773301
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.4 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5276″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.4 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 87 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 87 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.7609M
Item #: 40009839
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.7609MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.7609
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CRDCN204CD Toolholder
Item #: FJ10U104009
Brand: Sumitomo
Model #: U104009
| Product Specifications | |
|---|---|
| Shank Height (H) | 1 1/4″ |
| Head Length (LH) | 1.3″ |
| Shank Width (B) | 1 1/4″ |
| Cutting Direction (HAND) | Neutral |
| Protruding Length (LPR) | 5/8″ |
| Shank Type | Square |
| Overall Length (OAL) | 6″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 1″ × 2″ × 4-1/2″ LHS / LHC HSS-E (PM) Powder Metal High Helix Finishing End Mill-3F SE CC LH - Bright
Item #: CE60C40310
Brand: Cleveland
Model #: C40310
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4-1/2″ |
| Decimal Equivalent | 1″ |
| Cutting Edge Material | HSSPM |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | PM-539L |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Left Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
| Trade Name | PM-Plus |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
End Mills - Reduced Shank End Mills - 0.5000″ (1/2″) Cutter Diameter × 0.7500″ (3/4″) Length of Cut Carbide Reduce Shank Square End Mill, 4 Flutes, AlTiN Coated
Item #: GE90943232C3
Brand: Harvey Tool
Model #: 943232-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Flute Count (NOF) | 4 |
| Depth of Cut Maximum (APMX) | 3/4″ |
| End Shape | Square |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.3 mm Dia. × 14 mm Shank × 87 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773296
Brand: Nachi America Inc
Model #: 0773296
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.3 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5236″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.3 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 87 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 87 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.7 mm Dia. × 14 mm Shank × 90 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773330
Brand: Nachi America Inc
Model #: 0773330
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.7 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5394″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.7 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 90 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 90 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.5 mm Dia. × 14 mm Shank × 87 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773318
Brand: Nachi America Inc
Model #: 0773318
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.5 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5315″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.5 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 87 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 87 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.6 mm Dia. × 14 mm Shank × 90 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773324
Brand: Nachi America Inc
Model #: 0773324
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.6 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5354″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.6 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 90 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 90 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-11-1/2 NPTF REK.A Tap
Item #: ER4510452
Brand: EMUGE-FRANKEN
Model #: AW1810005788
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 1″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 11.5 |
| Applicable Material | Steel | Cast Iron | Aluminum / Non-Ferrous Materials |
| Thread Standard | NPTF |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 0 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 3-3/4″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1-3/4″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 1-1/8″ |
| Standard | ANSI |
| Flute Type | Straight |
| Thread Size | 1″ - 11.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-11-1/2 NPT REK.2A Tap
Item #: ER4513510
Brand: EMUGE-FRANKEN
Model #: CW1810005769
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 1″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 11.5 |
| Applicable Material | Cast Iron |
| Thread Standard | NPT |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 0 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 6.299″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1-3/4″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 1-1/8″ |
| Standard | ANSI |
| Flute Type | Straight |
| Thread Size | 1″ - 11.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-11-1/2 NPTF REK.2A Tap
Item #: ER4513517
Brand: EMUGE-FRANKEN
Model #: CW1810005788
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 1″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 11.5 |
| Applicable Material | Cast Iron |
| Thread Standard | NPTF |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 0 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 6.299″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1-3/4″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 1-1/8″ |
| Standard | ANSI |
| Flute Type | Straight |
| Thread Size | 1″ - 11.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-11-1/2 NPT REK.A Tap
Item #: ER4510443
Brand: EMUGE-FRANKEN
Model #: AW1810005769
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 1″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 11.5 |
| Applicable Material | Steel | Cast Iron | Aluminum / Non-Ferrous Materials |
| Thread Standard | NPT |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 0 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 3-3/4″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1-3/4″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 1-1/8″ |
| Standard | ANSI |
| Flute Type | Straight |
| Thread Size | 1″ - 11.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16771 5/8X.030R WELDON
Item #: DD1616771
Brand: M A Ford
Model #: 18062514BW
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Count (NOF) | 7 |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Shank Type | Weldon Flat |
| Overall Length (OAL) | 3-1/2″ |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.03″ |
| Coating | Altima Blaze |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18.0 End Mill 3FL SQ - SER 05S 18x18x38x100
Item #: DD9040577
Brand: KYOCERA SGS Precision Tools
Model #: 40577
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 18 mm |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 18 mm |
| Usable Length (LU) | 62 mm |
| Depth of Cut Maximum (APMX) | 38 mm |
| Corner Radius (RE) | None |
| Overall Length (OAL) | 100 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Uncoated |
| Decimal Equivalent | 0.7087″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | 05S |
| Shank Type | Round |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
20.0X20X26X92 4FL V7 EM
Item #: YG33EMD42200
Brand: YG-1 Cutting Tools
Model #: EMD42200
| Product Specifications | |
|---|---|
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.8181M
Item #: 40009953
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.8181MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.8181
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It