BES Up To 2022 $100-$250 Products - (25001 Products)
ER32SRF12X85
Item #: TG624509188
Brand: Tungaloy
Model #: 4509188
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 12 mm |
| Application | | Accessories | |
| Body Length (LB) | 50 mm |
| Thread Designation Inside (THID) | M14 |
| Body Length_2 (LB_2) | 50 mm |
| Tool Type | Interchangeable Milling Connectors |
| Body Diameter (BD) | 20 mm |
| Measurement Type | Metric |
| Body Diameter_2 (BD_2) | 32 mm |
| Body Material | Steel |
| Overall Length (OAL) | 85 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3MT Inside; 3MT Outside; 8-1/2" OAL
Item #: AJ50CIS3
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Inside Taper: 3
*Overall Length: 8-1/2
*Type: Coolant Inducer Socket
Description:
*For use with Taper Shank Oil Hole Drills
Shipping Info:
*Actual Weight - 2.5920
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/8 x 4 - Oversize Oil Hardening Flat Stock
Item #: LY652413
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/8
*Width: 4
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 16.0200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8 x 1 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055033
Manufacturer: Starrett
Mfg #: 55033
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 7/8
*Width: 1
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 5.9500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9 Pc. - 3/8" Drive Turbosocket Set - Metric
Item #: KP30TSMS3809
Manufacturer: Williams
Mfg #: 9324764
Technical Specifications:
*Brand Name: Williams
*Case Type: Clip & Rail
*Number of Pieces: 9
*Removes Range: 10mm - 19mm
*Type: 3/8" Drive
Description:
*Quickly and easily remove damaged or rounded nuts and bolts
*Grip on fastener tightens as more torque is applied
*No hammering is required to install socket over fastener
*Use on all types of standard nuts and bolts as well as studs, pipe nipples, and corroded auto and marine fasteners
*May be used for "best fit" on metric and fractional fasteners
*May be used with air or electric impact wrench for extra speed and turning power
Shipping Info:
*Actual Weight - 1.0361
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 End Mill 3FL .090R TB - S-CARB 1/2x1/2x5/8x6
Item #: DD9232837
Brand: KYOCERA SGS Precision Tools
Model #: 32837
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Usable Length (LU) | 5-7/8″ |
| Overall Length (OAL) | 6″ |
| Corner Radius (RE) | 0.09″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | TB |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 3 |
| Decimal Equivalent | 0.5″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Series/List # | S-CARB |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 End Mill 3FL .120R TB - S-CARB 1/2x1/2x5/8x6
Item #: DD9232838
Brand: KYOCERA SGS Precision Tools
Model #: 32838
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Usable Length (LU) | 5-7/8″ |
| Overall Length (OAL) | 6″ |
| Corner Radius (RE) | 0.12″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | TB |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 3 |
| Decimal Equivalent | 0.5″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Series/List # | S-CARB |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
All Purpose File Set 13 Pc., No Handle, American, 8 and 10 in
Item #: FT4072759260
Brand: Simonds
Model #: 72759260
| Product Specifications | |
|---|---|
| Width | 4.375″ |
| Number of Pieces | 13 |
| Thickness | 4.375″ |
| Included | All Purpose File Set 13 Pc., No Handle, American, 8 and 10 in |
| Overall Length | 15″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/4″ × 7/8″ × 2″ × 4-1/2″ RHS / RHC HSS HSS Single End Mulit Flute Center Cutting Finishing End Mill - Bright
Item #: CE60C33182
Brand: Cleveland
Model #: C33182
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1-1/4″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 7/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4-1/2″ |
| Decimal Equivalent | 1.25″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HG-4C |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 1″ × 4″ × 6-1/2″ RHS / RHC HSS HSS Single End 3-Flute Center Cutting Finishing End Mill - TiN
Item #: CE60C39767
Brand: Cleveland
Model #: C39767
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 6-1/2″ |
| Decimal Equivalent | 1″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | TiN |
| Series/List # | HG-3-TN |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.9058M
Item #: 40076176
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.9058MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.9058
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.9143M
Item #: 40076515
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.9143MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.9143
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10M HM BALL SH 6FL TIALN
Item #: ER4520906
Brand: EMUGE-FRANKEN
Model #: 2836A.010
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Tool Type | Hard-Cut |
| Overall Length (OAL) | 72 mm |
| Length Group | Stub |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 6 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | 2836A |
| Shank Type | HA |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 6 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10M HM BALL XLG 2FL TIALN
Item #: ER4520847
Brand: EMUGE-FRANKEN
Model #: 2819A.010
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 10 mm |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Tool Type | Hard-Cut |
| Overall Length (OAL) | 100 mm |
| Length Group | Extra Long |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | 2819A |
| Shank Type | HA |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 5.5 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21/64″ Dia. × 10 mm Shank × 61 mm Flute Length × 103 mm OAL, 5xD, 145°, TA, 2 Flute, Coolant Thru, Round Solid Carbide Drill
Item #: DD9251921
Brand: KYOCERA SGS Precision Tools
Model #: 51921
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 21/64″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 21/64″ |
| Length Below Shank | 1.575″ |
| Decimal Equivalent | 0.3281″ |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Inch |
| Coating | TA |
| Series/List # | Ice-Carb |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Usable Length (LU) | 49 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Length Chip Flute (LCF) | 61 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 103 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.3 mm Dia. × 14 mm Shank × 114 mm Flute Length × 77 mm OAL, 5xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH408133
Brand: YG-1 Cutting Tools
Model #: DH408133
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.3 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.5236″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.3 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 5xD |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH408 |
| Applicable Material | Steel |
| Usable Length (LU) | 114 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 114 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 77 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.7 mm Dia. × 14 mm Shank × 114 mm Flute Length × 77 mm OAL, 5xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH408137
Brand: YG-1 Cutting Tools
Model #: DH408137
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.7 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.5394″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.7 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 5xD |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH408 |
| Applicable Material | Steel |
| Usable Length (LU) | 114 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 114 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 77 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/16″ × 9/16″ × 1-1/4″ × 3-1/2″ RHS / RHC Solid Carbide 3-Flute Square End Single End General Purpose End Mill - TiAlN
Item #: BA10B67136
Brand: Bassett
Model #: B67136
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 9/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 9/16″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.5625″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | MSE-3-TA |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Single / Double End | Single End |
| Shank Type | Round |
| Center Cutting | Yes |
| End Shape | Corner Radius |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12.6 mm Dia. × 14 mm Shank × 114 mm Flute Length × 77 mm OAL, 5xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH408126
Brand: YG-1 Cutting Tools
Model #: DH408126
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 12.6 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.4961″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 12.6 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 5xD |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH408 |
| Applicable Material | Steel |
| Usable Length (LU) | 114 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 114 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 77 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It