2" OAL - .020 CR-Solid Carbide - HP End Mill-4 FL

Item #: TP4836702011
Manufacturer: OSG USA, Inc.
Mfg #: 36702011

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Flute Length: 1 •Helix Angle: 30 Degree •List No.: 3670 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .020 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Corner Radius •Trade Name: EXOCARB® WXL® •Type: Corner Radius

Description:
•EXOCARB WXL coated carbide end mills •4 Flute corner radius •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: for side milling & shallow slotting in non-ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .1300 •Dimensions - Height: .550 Length: 2.65 Width: .650

$107.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3833SD R 1/2X1.25X3 3FL ALUMAMILL

Item #: FT8527120
Manufacturer: Fullerton Tool
Mfg #: 27120

Technical Specifications:
•Brand Name: Fullerton Tool

Description:

Shipping Info:
•Actual Weight - .2750

$112.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 3/8 x 1 x 2-1/2 4Fl .045 C/R Carbide End Mill - WXL

Item #: TP4836702211
Manufacturer: OSG USA, Inc.
Mfg #: 36702211

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Flute Length: 1 •Helix Angle: 30 Degree •List No.: 3670 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .045 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Corner Radius •Trade Name: EXOCARB® WXL® •Type: Corner Radius

Description:
•OSG List No. 3670

Shipping Info:
•Actual Weight - .1300 •Dimensions - Height: .550 Length: 2.65 Width: .650

$107.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 2-1/2" OAL - .030 CR-Solid Carbide - HP End Mill-4 FL

Item #: TP4836702111
Manufacturer: OSG USA, Inc.
Mfg #: 36702111

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Flute Length: 1 •Helix Angle: 30 Degree •List No.: 3670 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .030 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Corner Radius •Trade Name: EXOCARB® WXL® •Type: Corner Radius

Description:
•EXOCARB WXL coated carbide end mills •4 Flute corner radius •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: for side milling & shallow slotting in non-ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .1300 •Dimensions - Height: .550 Length: 2.70 Width: .650

$107.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

10mm TuffCut SS 3 Fl High Helix Center Cutting End Mill

Item #: DD1511239
Manufacturer: M A Ford
Mfg #: 11239370

Technical Specifications:
•Brand Name: M A Ford •Coating: Uncoated •Flute Length: 25mm •List No.: 112 •Material: Carbide •Model Number: 11239370 •Number of Flutes: 3 •Overall Length: 70mm •Radius: None •Shank Diameter: 10mm •Size: 10mm •Trade Name: Tuff Cut SS •Type: Single End

Description:

Shipping Info:
•Actual Weight - .1555 •Dimensions - Height: .500 Length: 2.75 Width: .500

$107.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

9mm TuffCut SS 3 Fl High Helix TiN Coated Center Cutting End Mill

Item #: DD1511236
Manufacturer: M A Ford
Mfg #: 11235430T

Technical Specifications:
•Brand Name: M A Ford •Coating: TiN •Flute Length: 20mm •List No.: 112 •Material: Carbide •Model Number: 11235430T •Number of Flutes: 3 •Overall Length: 64mm •Radius: None •Shank Diameter: 9mm •Size: 9mm •Trade Name: Tuff Cut SS •Type: Single End

Description:

Shipping Info:
•Actual Weight - .1169 •Dimensions - Height: .500 Length: 2.50 Width: .500

$107.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 1-1/4" LOC - 3" OAL - .030 Radius 6 FL Carbide End Mill-AlTiN-x

Item #: DD4069225
Manufacturer: Imco
Mfg #: 69225

Technical Specifications:
•Brand Name: Imco •Coating: AlTiN-X •Flute Length: 1-1/4 •Material: Solid Carbide •Number of Flutes: 6 •Overall Length: 3 •Radius: .030 •Shank Diameter: 3/8 •Shank Type: Weldon Shank •Size: 3/8 •Style: Single End •Trade Name: M726 Omega-6

Description:
•Mills steels heat treated up to 58-62 HRC with or without coolant •Optomized geometries, stronger cutting edges, superior balance •Five or six high strength flutes for maximum stability and less chatter •50° Helix creates a high shear plane for better efficiency and chip control •AlTiN-X coating

Shipping Info:
•Actual Weight - .1575

$113.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 1-1/4" LOC - 3" OAL - .015 Radius 6 FL Carbide End Mill-AlTiN-x

Item #: DD4069224
Manufacturer: Imco
Mfg #: 69224

Technical Specifications:
•Brand Name: Imco •Coating: AlTiN-X •Flute Length: 1-1/4 •Material: Solid Carbide •Number of Flutes: 6 •Overall Length: 3 •Radius: .015 •Shank Diameter: 3/8 •Shank Type: Weldon Shank •Size: 3/8 •Style: Single End •Trade Name: M726 Omega-6

Description:
•Mills steels heat treated up to 58-62 HRC with or without coolant •Optomized geometries, stronger cutting edges, superior balance •Five or six high strength flutes for maximum stability and less chatter •50° Helix creates a high shear plane for better efficiency and chip control •AlTiN-X coating

Shipping Info:
•Actual Weight - .1575

$113.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 2" LOC - 4" OAL - .015 Radius 2 FL Carbide S/E HP End Mill-Uncoated

Item #: DD4034100
Manufacturer: Imco
Mfg #: 34100

Technical Specifications:
•Brand Name: Imco •Coating: Uncoated •Flute Length: 2 •Material: Solid Carbide •Number of Flutes: 2 •Overall Length: 4 •Radius: .015 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Round Shank •Trade Name: M202 Streaker •Type: 45° Helix

Description:
•Solid carbide 2 flute square end 45 helix, center cutting end mill •2 flute round shank •2 flute style M202: great for both roughing and finishing •Use for high or low speed applications •High strength carbide •For high chip loads •Excellent surface finishes

Shipping Info:
•Actual Weight - 1.0000 •Dimensions - Height: .750 Length: 4.50 Width: .750

$113.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 2" LOC - 4" OAL - .030 Radius 2 FL Carbide S/E HP End Mill-Uncoated

Item #: DD4034144
Manufacturer: Imco
Mfg #: 34144

Technical Specifications:
•Brand Name: Imco •Coating: Uncoated •Flute Length: 2 •Material: Solid Carbide •Number of Flutes: 2 •Overall Length: 4 •Radius: .030 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Round Shank •Trade Name: M202 Streaker •Type: 45° Helix

Description:
•Solid carbide 2 flute square end 45 helix, center cutting end mill •2 flute round shank •2 flute style M202: great for both roughing and finishing •Use for high or low speed applications •High strength carbide •For high chip loads •Excellent surface finishes

Shipping Info:
•Actual Weight - .2000

$113.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 TuffCut X-AL 3 Fl Center Cutting Aluminum Finisher End Mill

Item #: DD1513842
Manufacturer: M A Ford
Mfg #: 13837508

Technical Specifications:
•Brand Name: M A Ford •Coating: Uncoated •Flute Length: 2 •For Use With: Aluminum •List No.: 138 •Material: Carbide •Model Number: 13837508 •Number of Flutes: 3 •Overall Length: 4 •Radius: None •Shank Diameter: 3/8 •Size: 3/8 •Style: Standard •Trade Name: Tuff Cut® X-AL •Type: Single End

Description:
•Ford Lube: hi-lubricity- providing minimal edge build-up •Very high feed rates & excellent surface finish •3 Flute geometry promotes smooth cutting action

Shipping Info:
•Actual Weight - .1840 •Dimensions - Height: .500 Length: 4.00 Width: .500

$107.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 3/8 x 1-1/8 x 3 x .030 Rad 9 Flute End Mill IPT9-AlCrNX Coated

Item #: DD4463945
Manufacturer: Imco
Mfg #: 63945

Technical Specifications:
•Brand Name: Imco •Flute Length: 1-1/8 •Flute Length x Diameter Ratio: 3xD •Number of Flutes: 9 •Overall Length: 3 •Radius: .030 •Shank Diameter: 3/8 •Size: 3/8 •Trade Name: IPT9-CR Pow.R.Path

Description:
•AlCrNX coated •Increased feed rates and excellent surface finish •Unique design runs up to 3.5X the tool diameter deep, generating high metal removal rates

Shipping Info:
•Actual Weight - .1575

$112.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 5/8 x 3 w/1-3/8 Reach .125 Radius 3 Flute Carbide M223N Streaker End Mill-ZrN

Item #: DD4061164
Manufacturer: Imco
Mfg #: 61164

Technical Specifications:
•Brand Name: Imco •Coating: ZrN •Flute Length: 5/8 •Material: Carbide •Number of Flutes: 3 •Overall Length: 3 •Radius: .125 •Reach: 1-3/8 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: M223N Streaker

Description:
•Designed for machining aluminum •ZrN coated for maximum tool life

Shipping Info:
•Actual Weight - .2778

$112.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 3/8 x 1-1/8 x 3 x 7 Flute .090R 3xD Pow-R-Path Mill AlCRNX Coated-Series IPT7-CR

Item #: DD4463511
Manufacturer: Imco
Mfg #: 63511

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 1-1/8 •List No.: IPT7-CR •Material: Solid Carbide •Number of Flutes: 7 •Overall Length: 3 •Radius: .090 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 3/8 •Style: Single End •Trade Name: IPT7-CR Pow.R.Path

Description:
•Specifically designed to maximize High Efficiency Machining (HEM) techniques •Unique flute design for maximum metal removal rates •Thick core for maximum stability and tool life •40° Helix •AlCrNX Coated

Shipping Info:
•Actual Weight - .5000

$112.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

10mm TuffCut X-AL 3 Fl Center Cutting Aluminum Finisher End Mill CERAedge®

Item #: DD1508034
Manufacturer: M A Ford
Mfg #: 13839370CE

Technical Specifications:
•Brand Name: M A Ford •Coating: CERAedge® •Flute Length: 22mm •List No.: 138CE •Material: Carbide •Model Number: 13839370CE •Number of Flutes: 3 •Overall Length: 70mm •Radius: None •Shank Diameter: 10mm •Size: 10mm •Trade Name: Tuff Cut® X-AL •Type: Single End

Description:

Shipping Info:
•Actual Weight - .1526 •Dimensions - Height: .500 Length: 2.75 Width: .500

$107.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 5/8 x 3 w/1-3/8 Reach .015 Radius 3 Flute Carbide M223N Streaker End Mill-ZrN

Item #: DD4061161
Manufacturer: Imco
Mfg #: 61161

Technical Specifications:
•Brand Name: Imco •Coating: ZrN •Flute Length: 5/8 •Material: Carbide •Number of Flutes: 3 •Overall Length: 3 •Radius: .015 •Reach: 1-3/8 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: M223N Streaker

Description:
•Designed for machining aluminum •ZrN coated for maximum tool life

Shipping Info:
•Actual Weight - .2778

$112.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 1-1/4 x 3-1/2 5Fl .060 C/R Carbide End Mill - TiALN

Item #: TP45VG5345006
Manufacturer: OSG USA, Inc.
Mfg #: VG534-5006

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: TiALN •Flute Length: 1-1/4 •Helix Angle: 38 Degree •List No.: VG534 •Material: Carbide •Number of Flutes: 5 •Overall Length: 3-1/2 •Radius: .060 •Shank Diameter: 1/2 •Shank Type: Weldon Shank •Size: 1/2 •Style: Corner Radius •Trade Name: HY-PRO® CARB VGx •Type: Corner Radius

Description:
•High Performance Carbide •Non-Center Cutting •TiALN Coating •Corner Radius •5 Flute •Recommended for Cast Iron, Carbon Steels, Alloy Steels, Die Steels, Stainless Steels, Hardened Steels up to 45 HrC and High Heat Alloys

Shipping Info:
•Actual Weight - .3200 •Dimensions - Height: .650 Length: 4.40 Width: .750

$107.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GMF24032 1/2 DIA 2FL HP EM

Item #: YG34GMF24032
Manufacturer: YG-1 Cutting Tools
Mfg #: GMF24032

Technical Specifications:
•Brand Name: YG-1 Cutting Tools

Description:

Shipping Info:

$114.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" Dia. - 1-1/4" LOC - 3-1/4" OAL - .060 Radius 2 FL Carbide S/E HP End Mill-Uncoated

Item #: DD4034197
Manufacturer: Imco
Mfg #: 34197

Technical Specifications:
•Brand Name: Imco •Coating: Uncoated •Flute Length: 1-1/4 •Material: Solid Carbide •Number of Flutes: 2 •Overall Length: 3-1/4 •Radius: .060 •Shank Diameter: 1/2 •Shank Type: Weldon Shank •Size: 1/2 •Style: Weldon Shank •Trade Name: M202 Streaker •Type: 45° Helix

Description:
•Solid carbide 2 flute square end 45 helix, center cutting •Round shank •2 flute Style M202: great for both roughing and finishing •Use for high or low speed applications •High strength carbide •For high chip loads •Excellent surface finishes

Shipping Info:
•Actual Weight - .3000

$112.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 5/8 x 3 w/1-3/8 Reach .060 Radius 3 Flute Carbide M223N Streaker End Mill-ZrN

Item #: DD4061163
Manufacturer: Imco
Mfg #: 61163

Technical Specifications:
•Brand Name: Imco •Coating: ZrN •Flute Length: 5/8 •Material: Carbide •Number of Flutes: 3 •Overall Length: 3 •Radius: .060 •Reach: 1-3/8 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: M223N Streaker

Description:
•Designed for machining aluminum •ZrN coated for maximum tool life

Shipping Info:
•Actual Weight - .2778

$112.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It